to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),
It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.
Obtained from: TrustedBSD Project
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd(). Update policies.
Obtained from: TrustedBSD Project
be a no-op request, and why this might have to change if we want to allow
leaving a partition someday.
Obtained from: TrustedBSD Project
MFC after: 3 days
control logic and policy registration remaining in that file, and access
control checks broken out into other files by class of check.
Obtained from: TrustedBSD Project
fragment reassembly queues.
This allows policies to label reassembly queues, perform access
control checks when matching fragments to a queue, update a queue
label when fragments are matched, and label the resulting
reassembled datagram.
Obtained from: TrustedBSD Project
When I changed kern_conf.c three months ago I made device unit numbers
equal to (unneeded) device minor numbers. We used to require
bitshifting, because there were eight bits in the middle that were
reserved for a device major number. Not very long after I turned
dev2unit(), minor(), unit2minor() and minor2unit() into macro's.
The unit2minor() and minor2unit() macro's were no-ops.
We'd better not remove these four macro's from the kernel, because there
is a lot of (external) code that may still depend on them. For now it's
harmless to remove all invocations of unit2minor() and minor2unit().
Reviewed by: kib
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.
This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.
This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by: rwatson
appropriate even if Solaris doesn't document it (E2BIG) or use it
(EOVERFLOW).
Submitted by: nectar at apple dot com
Sponsored by: Apple, Inc.
MFC after: 3 days
(1) Abstract interpreter vnode labeling in execve(2) and mac_execve(2)
so that the general exec code isn't aware of the details of
allocating, copying, and freeing labels, rather, simply passes in
a void pointer to start and stop functions that will be used by
the framework. This change will be MFC'd.
(2) Introduce a new flags field to the MAC_POLICY_SET(9) interface
allowing policies to declare which types of objects require label
allocation, initialization, and destruction, and define a set of
flags covering various supported object types (MPC_OBJECT_PROC,
MPC_OBJECT_VNODE, MPC_OBJECT_INPCB, ...). This change reduces the
overhead of compiling the MAC Framework into the kernel if policies
aren't loaded, or if policies require labels on only a small number
or even no object types. Each time a policy is loaded or unloaded,
we recalculate a mask of labeled object types across all policies
present in the system. Eliminate MAC_ALWAYS_LABEL_MBUF option as it
is no longer required.
MFC after: 1 week ((1) only)
Reviewed by: csjp
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
space provided by its argument structure, return EOVERFLOW instead of
E2BIG. The latter is documented in Solaris's man page, but the
former is implemented. In either case, the caller should use
getaudit_addr(2) to return the IPv6 address.
Submitted by: sson
Obtained from: Apple, Inc.
MFC after: 3 days
It is possible that the audit pipe(s) have different preselection configs
then the global preselection mask.
Spotted by: Vincenzo Iozzo
MFC after: 2 weeks
return success if the passed vnode pointer is NULL (rather than
panicking). This can occur if either audit or accounting are
disabled while the policy is running.
Since the swapoff control has no real relevance to this policy,
which is concerned about intent to write rather than water under the
bridge, remove it.
PR: kern/126100
Reported by: Alan Amesbury <amesbury at umn dot edu>
MFC after: 3 days
processes are not producing absolute pathname tokens. It is required
that audited pathnames are generated relative to the global root mount
point. This modification changes our implementation of audit_canon_path(9)
and introduces a new function: vn_fullpath_global(9) which performs a
vnode -> pathname translation relative to the global mount point based
on the contents of the name cache. Much like vn_fullpath,
vn_fullpath_global is a wrapper function which called vn_fullpath1.
Further, the string parsing routines have been converted to use the
sbuf(9) framework. This change also removes the conditional acquisition
of Giant, since the vn_fullpath1 method will not dip into file system
dependent code.
The vnode locking was modified to use vhold()/vdrop() instead the vref()
and vrele(). This will modify the hold count instead of modifying the
user count. This makes more sense since it's the kernel that requires
the reference to the vnode. This also makes sure that the vnode does not
get recycled we hold the reference to it. [1]
Discussed with: rwatson
Reviewed by: kib [1]
MFC after: 2 weeks
semaphores. Specifically, semaphores are now represented as new file
descriptor type that is set to close on exec. This removes the need for
all of the manual process reference counting (and fork, exec, and exit
event handlers) as the normal file descriptor operations handle all of
that for us nicely. It is also suggested as one possible implementation
in the spec and at least one other OS (OS X) uses this approach.
Some bugs that were fixed as a result include:
- References to a named semaphore whose name is removed still work after
the sem_unlink() operation. Prior to this patch, if a semaphore's name
was removed, valid handles from sem_open() would get EINVAL errors from
sem_getvalue(), sem_post(), etc. This fixes that.
- Unnamed semaphores created with sem_init() were not cleaned up when a
process exited or exec'd. They were only cleaned up if the process
did an explicit sem_destroy(). This could result in a leak of semaphore
objects that could never be cleaned up.
- On the other hand, if another process guessed the id (kernel pointer to
'struct ksem' of an unnamed semaphore (created via sem_init)) and had
write access to the semaphore based on UID/GID checks, then that other
process could manipulate the semaphore via sem_destroy(), sem_post(),
sem_wait(), etc.
- As part of the permission check (UID/GID), the umask of the proces
creating the semaphore was not honored. Thus if your umask denied group
read/write access but the explicit mode in the sem_init() call allowed
it, the semaphore would be readable/writable by other users in the
same group, for example. This includes access via the previous bug.
- If the module refused to unload because there were active semaphores,
then it might have deregistered one or more of the semaphore system
calls before it noticed that there was a problem. I'm not sure if
this actually happened as the order that modules are discovered by the
kernel linker depends on how the actual .ko file is linked. One can
make the order deterministic by using a single module with a mod_event
handler that explicitly registers syscalls (and deregisters during
unload after any checks). This also fixes a race where even if the
sem_module unloaded first it would have destroyed locks that the
syscalls might be trying to access if they are still executing when
they are unloaded.
XXX: By the way, deregistering system calls doesn't do any blocking
to drain any threads from the calls.
- Some minor fixes to errno values on error. For example, sem_init()
isn't documented to return ENFILE or EMFILE if we run out of semaphores
the way that sem_open() can. Instead, it should return ENOSPC in that
case.
Other changes:
- Kernel semaphores now use a hash table to manage the namespace of
named semaphores nearly in a similar fashion to the POSIX shared memory
object file descriptors. Kernel semaphores can now also have names
longer than 14 chars (up to MAXPATHLEN) and can include subdirectories
in their pathname.
- The UID/GID permission checks for access to a named semaphore are now
done via vaccess() rather than a home-rolled set of checks.
- Now that kernel semaphores have an associated file object, the various
MAC checks for POSIX semaphores accept both a file credential and an
active credential. There is also a new posixsem_check_stat() since it
is possible to fstat() a semaphore file descriptor.
- A small set of regression tests (using the ksem API directly) is present
in src/tools/regression/posixsem.
Reported by: kris (1)
Tested by: kris
Reviewed by: rwatson (lightly)
MFC after: 1 month
same as the global variable defined in ip_input.c. Instead, adopt the name
'q' as found in about 1/2 of uses in ip_input.c, preventing a collision on
the name. This is non-harmful, but means that search and replace on the
global works less well (as in the virtualization work), as well as indexing
tools.
MFC after: 1 week
Reported by: julian
Except for the case where we use the cloner library (clone_create() and
friends), there is no reason to enforce a unique device minor number
policy. There are various drivers in the source tree that allocate unr
pools and such to provide minor numbers, without using them themselves.
Because we still need to support unique device minor numbers for the
cloner library, introduce a new flag called D_NEEDMINOR. All cdevsw's
that are used in combination with the cloner library should be marked
with this flag to make the cloning work.
This means drivers can now freely use si_drv0 to store their own flags
and state, making it effectively the same as si_drv1 and si_drv2. We
still keep the minor() and dev2unit() routines around to make drivers
happy.
The NTFS code also used the minor number in its hash table. We should
not do this anymore. If the si_drv0 field would be changed, it would no
longer end up in the same list.
Approved by: philip (mentor)
which label mbufs. This leak can occur if one policy successfully allocates
label storage and subsequent allocations from other policies fail.
Spotted by: rwatson
MFC after: 1 week
than checking whether audit is enabled globally, instead check whether
the current thread has an audit record. This avoids entering the audit
code to collect argument data if auditing is enabled but the current
system call is not of interest to audit.
MFC after: 1 week
Sponsored by: Apple, Inc.
exit requires entering the audit code. The result is much the same,
but they mean different things.
MFC afer: 3 days
Submitted by: Diego Giagio <dgiagio at gmail dot com>
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
returns EINVAL. Right now we return 0 or success for invalid commands,
which could be quite problematic in certain conditions.
MFC after: 1 week
Discussed with: rwatson
a queue entry field, just copy out the unsigned int that is the trigger
message. In practice, auditd always requested sizeof(unsigned int), so
the extra bytes were ignored, but copying them out was not the intent.
MFC after: 1 month
global audit mutex and condition variables, with an sx lock which protects
the trail vnode and credential while in use, and is acquired by the system
call code when rotating the trail. Previously, a "message" would be sent
to the kernel audit worker, which did the rotation, but the new code is
simpler and (hopefully) less error-prone.
Obtained from: TrustedBSD Project
MFC after: 1 month
This makes sure that process tokens credentials with un-initialized
audit contexts are handled correctly. Currently, when invariants are
enabled, this change fixes a panic by ensuring that we have a valid
termid family. Also, this fixes token generation for process tokens
making sure that userspace is always getting a valid token.
This is consistent with what Solaris does when an audit context is
un-initialized.
Obtained from: TrustedBSD Project
MFC after: 1 week
relabel check for MLS rather than returning 0 directly.
This problem didn't result in a vulnerability currently as the central
implementation of ifnet relabeling also checks for UNIX privilege, and
we currently don't guarantee containment for the root user in mac_mls,
but we should be using the MLS definition of privilege as well as the
UNIX definition in anticipation of supporting root containment at some
point.
MFC after: 3 days
Submitted by: Zhouyi Zhou <zhouzhouyi at gmail dot com>
Sponsored by: Google SoC 2007
"BSM conversion requested for unknown event 43140"
It should be noted that we need to audit the fd argument for this system
call.
Obtained from: TrustedBSD Project
MFC after: 1 week
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
implement shm_open(2) and shm_unlink(2) in the kernel:
- Each shared memory file descriptor is associated with a swap-backed vm
object which provides the backing store. Each descriptor starts off with
a size of zero, but the size can be altered via ftruncate(2). The shared
memory file descriptors also support fstat(2). read(2), write(2),
ioctl(2), select(2), poll(2), and kevent(2) are not supported on shared
memory file descriptors.
- shm_open(2) and shm_unlink(2) are now implemented as system calls that
manage shared memory file descriptors. The virtual namespace that maps
pathnames to shared memory file descriptors is implemented as a hash
table where the hash key is generated via the 32-bit Fowler/Noll/Vo hash
of the pathname.
- As an extension, the constant 'SHM_ANON' may be specified in place of the
path argument to shm_open(2). In this case, an unnamed shared memory
file descriptor will be created similar to the IPC_PRIVATE key for
shmget(2). Note that the shared memory object can still be shared among
processes by sharing the file descriptor via fork(2) or sendmsg(2), but
it is unnamed. This effectively serves to implement the getmemfd() idea
bandied about the lists several times over the years.
- The backing store for shared memory file descriptors are garbage
collected when they are not referenced by any open file descriptors or
the shm_open(2) virtual namespace.
Submitted by: dillon, peter (previous versions)
Submitted by: rwatson (I based this on his version)
Reviewed by: alc (suggested converting getmemfd() to shm_open())
for that argument. This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the
kdb_enter() interface.
would be properly disposed of, but the global label structure for the
semaphore wouldn't be freed.
MFC after: 3 days
Reported by: tanyong <tanyong at ercist dot iscas dot ac dot cn>,
zhouzhouyi
supports the removal of hard-coded audit class constants in OpenBSM
1.0. All audit classes are now dynamically configured via the
audit_class database.
Obtained from: TrustedBSD Project
entry point, which is no longer required now that we don't support
old-style multicast tunnels. This removes the last mbuf object class
entry point that isn't init/copy/destroy.
Obtained from: TrustedBSD Project
Framework by moving from mac_mbuf_create_netlayer() to more specific
entry points for specific network services:
- mac_netinet_firewall_reply() to be used when replying to in-bound TCP
segments in pf and ipfw (etc).
- Rename mac_netinet_icmp_reply() to mac_netinet_icmp_replyinplace() and
add mac_netinet_icmp_reply(), reflecting that in some cases we overwrite
a label in place, but in others we apply the label to a new mbuf.
Obtained from: TrustedBSD Project
in the TrustedBSD MAC Framework:
- Add mac_atalk.c and add explicit entry point mac_netatalk_aarp_send()
for AARP packet labeling, rather than using a generic link layer
entry point.
- Add mac_inet6.c and add explicit entry point mac_netinet6_nd6_send()
for ND6 packet labeling, rather than using a generic link layer entry
point.
- Add expliict entry point mac_netinet_arp_send() for ARP packet
labeling, and mac_netinet_igmp_send() for IGMP packet labeling,
rather than using a generic link layer entry point.
- Remove previous genering link layer entry point,
mac_mbuf_create_linklayer() as it is no longer used.
- Add implementations of new entry points to various policies, largely
by replicating the existing link layer entry point for them; remove
old link layer entry point implementation.
- Make MAC_IFNET_LOCK(), MAC_IFNET_UNLOCK(), and mac_ifnet_mtx global
to the MAC Framework rather than static to mac_net.c as it is now
needed outside of mac_net.c.
Obtained from: TrustedBSD Project
we move towards netinet as a pseudo-object for the MAC Framework.
Rename 'mac_create_mbuf_linklayer' to 'mac_mbuf_create_linklayer' to
reflect general object-first ordering preference.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
This change introduces audit_proc_coredump() which is called by coredump(9)
to create an audit record for the coredump event. When a process
dumps a core, it could be security relevant. It could be an indicator that
a stack within the process has been overflowed with an incorrectly constructed
malicious payload or a number of other events.
The record that is generated looks like this:
header,111,10,process dumped core,0,Thu Oct 25 19:36:29 2007, + 179 msec
argument,0,0xb,signal
path,/usr/home/csjp/test.core
subject,csjp,csjp,staff,csjp,staff,1101,1095,50457,10.37.129.2
return,success,1
trailer,111
- We allocate a completely new record to make sure we arent clobbering
the audit data associated with the syscall that produced the core
(assuming the core is being generated in response to SIGABRT and not
an invalid memory access).
- Shuffle around expand_name() so we can use the coredump name at the very
beginning of the coredump call. Make sure we free the storage referenced
by "name" if we need to bail out early.
- Audit both successful and failed coredump creation efforts
Obtained from: TrustedBSD Project
Reviewed by: rwatson
MFC after: 1 month
primary object type, and then by secondarily by method name. This sorts
entry points relating to particular objects, such as pipes, sockets, and
vnodes together.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
from mac_vfs.c to mac_process.c to join other functions that setup up
process labels for specific purposes. Unlike the two proc create calls,
this call is intended to run after creation when a process registers as
the NFS daemon, so remains an _associate_ call..
Obtained from: TrustedBSD Project
than mac_<policy>_whatever, as this shortens the names and makes the code
a bit easier to read.
When dealing with label structures, name variables 'mb', 'ml', 'mm rather
than the longer 'mac_biba', 'mac_lomac', and 'mac_mls', likewise making
the code a little easier to read.
Obtained from: TrustedBSD Project
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
state is stored in an extended subject token now. Make sure
that we are using the extended data. This fixes the termID
for process tokens.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
on multiple different audit pipes. The old method used cv_signal()
which would result in only one thread being woken up after we
appended a record to it's queue. This resulted in un-timely wake-ups
when processing audit records real-time.
- Assign PSOCK priority to threads that have been sleeping on a read(2).
This is the same priority threads are woken up with when they select(2)
or poll(2). This yields fairness between various forms of sleep on
the audit pipes.
Obtained from: TrustedBSD Project
Discussed with: rwatson
MFC after: 1 week
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
point to mac_check_vnode_unlink(), reflecting UNIX naming conventions.
This is the first of several commits to synchronize the MAC Framework
in FreeBSD 7.0 with the MAC Framework as it will appear in Mac OS X
Leopard.
Reveiwed by: csjp, Samy Bahra <sbahra at gwu dot edu>
Submitted by: Jacques Vidrine <nectar at apple dot com>
Obtained from: Apple Computer, Inc.
Sponsored by: SPARTA, SPAWAR
Approved by: re (bmah)
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
vnode label for a check rather than the directory vnode label a second
time.
MFC after: 3 days
Submitted by: Zhouyi ZHOU <zhouzhouyi at FreeBSD dot org>
Reviewed by: csjp
Sponsored by: Google Summer of Code 2007
Approved by: re (bmah)
- Sort copyrights by date.
- Re-wrap, and in some cases, fix comments.
- Fix tabbing, white space, remove extra blank lines.
- Remove commented out debugging printfs.
Approved by: re (kensmith)
and replace with software-testable sysctl node (security.audit) that
can be used to detect kernel audit support.
Obtained from: TrustedBSD Project
Approved by: re (kensmith)
- In audit_bsm.c, make sure all the arguments: ARG_AUID, ARG_ASID, ARG_AMASK,
and ARG_TERMID{_ADDR} are valid before auditing their arguments. (This is done
for both setaudit and setaudit_addr.
- Audit the arguments passed to setaudit_addr(2)
- AF_INET6 does not equate to AU_IPv6. Change this in au_to_in_addr_ex() so the
audit token is created with the correct type. This fixes the processing of the
in_addr_ex token in users pace.
- Change the size of the token (as generated by the kernel) from 5*4 bytes to
4*4 bytes (the correct size of an ip6 address)
- Correct regression from ucred work which resulted in getaudit() not returning
E2BIG if the subject had an ip6 termid
- Correct slight regression in getaudit(2) which resulted in the size of a pointer
being passed instead of the size of the structure. (This resulted in invalid
auditinfo data being returned via getaudit(2))
Reviewed by: rwatson
Approved by: re@ (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
mpo_check_proc_setaudit_addr to be used when controlling use of
setaudit_addr(), rather than mpo_check_proc_setaudit(), which takes a
different argument type.
Reviewed by: csjp
Approved by: re (kensmith)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
embedded storage in struct ucred. This allows audit state to be cached
with the thread, avoiding locking operations with each system call, and
makes it available in asynchronous execution contexts, such as deep in
the network stack or VFS.
Reviewed by: csjp
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
argument from being file descriptor index into the pointer to struct file:
part 2. Convert calls missed in the first big commit.
Noted by: rwatson
Pointy hat to: kib
remove associated comments.
Slip audit_file_rotate_wait assignment in audit_rotate_vnode() before
the drop of the global audit mutex.
Obtained from: TrustedBSD Project
inline it when needed already, and the symbol is also required outside of
audit.c. This silences a new gcc warning on the topic of using __inline__
instead of __inline.
MFC after: 3 days
where similar data structures exist to support devfs and the MAC
Framework, but are named differently.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
variable name conventions for arguments passed into the framework --
for example, name network interfaces 'ifp', sockets 'so', mounts 'mp',
mbufs 'm', processes 'p', etc, wherever possible. Previously there
was significant variation in this regard.
Normalize copyright lists to ranges where sensible.
labels: the mount label (label of the mountpoint) and the fs label (label
of the file system). In practice, policies appear to only ever use one,
and the distinction is not helpful.
Combine mnt_mntlabel and mnt_fslabel into a single mnt_label, and
eliminate extra machinery required to maintain the additional label.
Update policies to reflect removal of extra entry points and label.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
the introduction of priv(9) and MAC Framework entry points for privilege
checking/granting. These entry points exactly aligned with privileges and
provided no additional security context:
- mac_check_sysarch_ioperm()
- mac_check_kld_unload()
- mac_check_settime()
- mac_check_system_nfsd()
Add mpo_priv_check() implementations to Biba and LOMAC policies, which,
for each privilege, determine if they can be granted to processes
considered unprivileged by those two policies. These mostly, but not
entirely, align with the set of privileges granted in jails.
Obtained from: TrustedBSD Project
- Redistribute counter declarations to where they are used, rather than at
the file header, so it's more clear where we do (and don't) have
counters.
- Add many more counters, one per policy entry point, so that many
individual access controls and object life cycle events are tracked.
- Perform counter increments for label destruction explicitly in entry
point functions rather than in LABEL_DESTROY().
- Use LABEL_INIT() instead of SLOT_SET() directly in label init functions
to be symmetric with destruction.
- Align counter names more carefully with entry point names.
- More constant and variable name normalization.
Obtained from: TrustedBSD Project
- Add a more detailed comment describing the mac_test policy.
- Add COUNTER_DECL() and COUNTER_INC() macros to declare and manage
various test counters, reducing the verbosity of the test policy
quite a bit.
- Add LABEL_CHECK() macro to abbreviate normal validation of labels.
Unlike the previous check macros, this checks for a NULL label and
doesn't test NULL labels. This means that optionally passed labels
will now be handled automatically, although in the case of optional
credentials, NULL-checks are still required.
- Add LABEL_DESTROY() macro to abbreviate the handling of label
validation and tear-down.
- Add LABEL_NOTFREE() macro to abbreviate check for non-free labels.
- Normalize the names of counters, magic values.
- Remove unused policy "enabled" flag.
Obtained from: TrustedBSD Project
calls. Add MAC Framework entry points and MAC policy entry points for
audit(), auditctl(), auditon(), setaudit(), aud setauid().
MAC Framework entry points are only added for audit system calls where
additional argument context may be useful for policy decision-making; other
audit system calls without arguments may be controlled via the priv(9)
entry points.
Update various policy modules to implement audit-related checks, and in
some cases, other missing system-related checks.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA, Inc.
tokens. Currently, we do not support the set{get}audit_addr(2) system
calls which allows processes like sshd to set extended or ip6
information for subject tokens.
The approach that was taken was to change the process audit state
slightly to use an extended terminal ID in the kernel. This allows
us to store both IPv4 IPv6 addresses. In the case that an IPv4 address
is in use, we convert the terminal ID from an struct auditinfo_addr to
a struct auditinfo.
If getaudit(2) is called when the subject is bound to an ip6 address,
we return E2BIG.
- Change the internal audit record to store an extended terminal ID
- Introduce ARG_TERMID_ADDR
- Change the kaudit <-> BSM conversion process so that we are using
the appropriate subject token. If the address associated with the
subject is IPv4, we use the standard subject32 token. If the subject
has an IPv6 address associated with them, we use an extended subject32
token.
- Fix a couple of endian issues where we do a couple of byte swaps when
we shouldn't be. IP addresses are already in the correct byte order,
so reading the ip6 address 4 bytes at a time and swapping them results
in in-correct address data. It should be noted that the same issue was
found in the openbsm library and it has been changed there too on the
vendor branch
- Change A_GETPINFO to use the appropriate structures
- Implement A_GETPINFO_ADDR which basically does what A_GETPINFO does,
but can also handle ip6 addresses
- Adjust get{set}audit(2) syscalls to convert the data
auditinfo <-> auditinfo_addr
- Fully implement set{get}audit_addr(2)
NOTE: This adds the ability for processes to correctly set extended subject
information. The appropriate userspace utilities still need to be updated.
MFC after: 1 month
Reviewed by: rwatson
Obtained from: TrustedBSD
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
