The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
This geom does not immediately detach its consumer relying on the
wither-washer to do that. Since that happens asynchronously we may get
additional spoiling events. So, we need to account for that.
There are multiple options for fixing this issue like detaching
immediately or checking for G_CF_ORPHAN in g_slice_spoiled().
The most reliable and least intrusive fix seems to be setting
geom->softc to NULL on the first call and checking for NULL on
subsequent calls. This is something that the code did before r325227.
Reported by: David Wolfskill <david@catwhisker.org>,
O. Hartmann <o.hartmann@walstatt.org>
Tested by: David Wolfskill <david@catwhisker.org> (earlier version)
Discussed with: mav
MFC after: 1 week
X-MFC with: r325227
At present, g_slice_orphan and g_slice_spoiled destroy the softc
(struct g_slicer) even before calling g_wither_geom, so there can
be active and incoming io requests at that time and g_slice_start
can access the softc.
This commit changes the code to destroy the softc only after all
providers are closed.
While there, a couple of small cleanups.
Reported by: Ben RUBSON <ben.rubson@gmail.com>
Tested by: Ben RUBSON <ben.rubson@gmail.com>
Reviewed by: mav, smh (earlier version)
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D12809
g_mirror_destroy() is supposed to unlock the softc before indicating
success, but it wasn't doing so if the caller raced with another
thread destroying the mirror.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
When using a kernel built with the GZIO config option, dumpon -z can be
used to configure gzip compression using the in-kernel copy of zlib.
This is useful on systems with large amounts of RAM, which require a
correspondingly large dump device. Recovery of compressed dumps is also
faster since fewer bytes need to be copied from the dump device.
Because we have no way of knowing the final size of a compressed dump
until it is written, the kernel will always attempt to dump when
compression is configured, regardless of the dump device size. If the
dump is aborted because we run out of space, an error is reported on
the console.
savecore(8) is modified to handle compressed dumps and save them to
vmcore.<index>.gz, as it does when given the -z option.
A new rc.conf variable, dumpon_flags, is added. Its value is added to
the boot-time dumpon(8) invocation that occurs when a dump device is
configured in rc.conf.
Reviewed by: cem (earlier version)
Discussed with: def, rgrimes
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11723
GEOM consumer can be orphaned, and then reattach to another provider.
From a user point of view, this makes gmountver(4) work again.
Reviewed by: avg, mav
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12228
Like r266444, g_resize_provider_event can attempt to orphan an already
orphaned geom_dev consumer. This will cause a panic in g_dev_orphan. Apply
the same fix as was applied to g_orphan_register.
Reviewed by: ae
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12469
In theory, all data access errors mean that a member is out of sync
at most. But they were treated as more serious errors to avoid the
situation where a flaky disk gets repeatedly disconnected, re-synchronized,
reconnected and then disconnected again.
ENXIO is a special error that means that the member disk disappeared,
so it should get the same handling as the GEOM orphaning event.
There is a better chance that when the disk is reconnected, it will be
a good member again.
When ENXIO happens on a read we use the exisiting G_MIRROR_BUMP_SYNCID
mechanism which means that the mirror's syncid is increased as soon
as there is a write to the mirror. That's because no data has got out
of sync yet, but the problematic memeber is disconnected, so the future
write will make it stale.
When ENXIO happens on a write we use a new G_MIRROR_BUMP_SYNCID_NOW
mechanism which means that we update the mirror metadata as soon as
possible because the problematic memeber is already behind.
Reviewed by: markj, imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9463
In integrity mode, a larger logical sector (e.g., 4096 bytes) spans several
physical sectors (e.g., 512 bytes) on the backing device. Due to hash
overhead, a 4096 byte logical sector takes 8.5625 512-byte physical sectors.
This means that only 288 bytes (256 data + 32 hash) of the last 512 byte
sector are used.
The memory allocation used to store the encrypted data to be written to the
physical sectors comes from malloc(9) and does not use M_ZERO.
Previously, nothing initialized the final physical sector backing each
logical sector, aside from the hash + encrypted data portion. So 224 bytes
of kernel heap memory was leaked to every block :-(.
This patch addresses the issue by initializing the trailing portion of the
physical sector in every logical sector to zeros before use. A much simpler
but higher overhead fix would be to tag the entire allocation M_ZERO.
PR: 222077
Reported by: Maxim Khitrov <max AT mxcrypt.com>
Reviewed by: emaste
Security: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12272
the g_journal level needs to check whether it is holding a newer
copy of the block than that which exists on the disk. If so, it
needs to return its copy. If not, it should pass the request down
to the disk to fulfill. It currently considers six queues:
0) delayed queue,
1) unsent (current queue),
2) in-flight to the journal (flush queue),
3) active journal (active queue),
4) inactive journal (inactive queue), and
5) inflight to the disk (copy queue).
Checking on two of these queues is unnecessary:
0) The delayed requests should not be used for reads because they
have not yet been entered into the journal, so their value should
reflect the disk contents, not the future contents that are not
yet committed.
2) Because all the bio's in the flush queue are also found on the
active queue, there is no need to inspect the flush queue for
reads since they will be found when searching the active queue.
Submitted by: Dr. Andreas Longwitz <longwitz@incore.de>
Discussed with: kib
MFC after: 1 week
geom_bsd, geom_mbr and geom_sunlabel have been obsolete since Marcel
Moolenaar's geom_part was in FreeBSD 7. They haven't been in GENERIC
since FreeBSD 8. Add warning when used.
geom_vol_ffs has been obsolete since ufs support to geom_label was
committed in FreeBSD 5. It hasn't been in GENERIC since FreeBSD 5.
Add warning when used.
geom_fox has been obsolete since gmultipath was committed in FreeBSD 7.
(no warning added, since this is a very obscure class).
These will all be removed in FreeBSD 12.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D11935
Note: Classes will be removed after MFC
No need to set any fields in the cloned device. devfs uses symlinks,
so the adev entries returned won't be presented to the drivers. Since
we don't save copies, nothing else will see them. This code came from
the old compat code, and it appears to be obsolete or never needed.
Submitted by: kib@
Differential Review: https://reviews.freebsd.org/D11919
Implement disk_add_alias to allow aliases to be added to disks. All
disk have a primary name (say "foo") can also have secondary names
(say "bar") such that all instances of "foo" also have a "bar"
alias. So if you have foo0, foo0p1, foo1, foo1s1 and foo1s1a nodes
created by the foo driver and gpart, device nodes bar0, bar0p1, bar1,
bar1s1 and bar1s1a will appear as symlinks back to the original nodes.
This generalizes to multiple aliases. However, since the unit number
follows the primary name, multiple device drivers can't create the
same aliases unless those drives coorinate the unit number space (eg
you couldn't add an alias 'disk' to both 'da' and 'ada' because it's
possible to have da0 and ada0, because 'disk0' is ambiguous).
Differential Revision: https://reviews.freebsd.org/D11873
When we're creating new providers for each of the partitions, add
aliases to the geom before we create the provider so when geom_dev
tastes the provider, the aliases are in place so the proper /dev
entries are created. So foo5p6 gets created as an alias for bar5p6
when foo is an alias for bar in the geom we're partitioning with
g_part. This also copies aliases from the container geom (eg disk) to
the label geom (the disk with GPT partitioning) so that aliases nest
properly.
Differential Revision: https://reviews.freebsd.org/D11873
Add an alias name list to geoms. Use them in geom_dev to create
aliases. Previously, geom_dev would create an device node for the name
of the geom. Now, additional nodes are created pointing back to the
primary node with make_dev_alias_p. Aliases must be in place on the
geom before any tasting occurs.
Differential Revision: https://reviews.freebsd.org/D11873
in the flush_queue:
1 2 3 4 5 6 7 8 9 10
and another 10 bio's go into the flush queue after only the first five
bio's are removed from the flush queue, the queue should look like:
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20,
but because of the bug we end up with
6 11 12 13 14 15 16 17 18 19 20 7 8 9 10.
So the sequence of the bio's is damaged in the flush queue (and
therefore in the journal on disk !). This error can be triggered by
ffs_snapshot() when a block is read with readblock() and gjournal finds
this block in the broken flush queue before it goes to the correct
active queue.
The fix is to place all new blocks at the end of the queue.
Submitted by: Dr. Andreas Longwitz <longwitz@incore.de>
Discussed with: kib
MFC after: 1 week
system having over 4GB RAM. That's due to:
1) the limit being u_int instead of u_long like vm.kmem_size (the limit is
half of vm.kmem_size by default for amd64);
2) sysctl handler g_journal_cache_limit_sysctl() using u_int instead of u_long.
The fix is to replace u_int with u_long for the kern.geom.journal.cache.limit
sysctl variable.
PR: 198500
Submitted by: Dr. Andreas Longwitz <longwitz@incore.de>
Reported by: Eugene Grosbein
Discussed with: kib
MFC after: 1 week
RPI1-B, Alix and APU2 boards as well as NanoBSD with the following message:
vnode_pager_generic_getpages_done: I/O read error 5
Seems the breakage was because it was missed to include acr in glabel update.
Reported by: Peter Blok <pblok@bsd4all.org>,
madpilot, imp and trasz.
Reviewed by: trasz
Tested by: Peter Blok and madpilot.
MFC after: 3 days.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D11365
Add -o [no]verify option to mdconfig (and document in man page.)
Implement GEOM attribute MNT::verified to ask md if the backing vnode is
verified.
Check for MNT::verified in cd9660 mount to flag the mount as MNT_VERIFIED if
the underlying device has been verified.
Reviewed by: rwatson
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2902
During gmirror startup, if component mirrors are found to be dirty as is
typical after a system crash, the mirrors are synchronized to the mirror
with highest priority. However if a gmirror starts without all of its
mirrors present, for example because of some transient delays during
tasting, the remaining mirrors must be synchronized before they may become
active.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Before this change it was impossible to set number of PKCS#5v2 iterations,
required to set passphrase, if it has two keys and never had any passphrase.
Due to present metadata format limitations there are still cases when number
of iterations can not be changed, but now it works in cases when it can.
PR: 218512
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10338
At this point we have not rendezvous'ed with the mirror worker thread, and
I/O may still be in flight. Various I/O completion paths expect to be able
to obtain a reference to the mirror softc from the GEOM, so setting it to
NULL may result in various NULL pointer dereferences if the mirror is
stopped with -f or the kernel is shut down while a mirror is
synchronizing. The worker thread will clear the softc pointer before
exiting.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
We are otherwise susceptible to a race with a concurrent teardown of the
mirror provider, causing the I/O to be left uncompleted after the mirror
started withering.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Regular I/O requests may be blocked by concurrent synchronization requests
targeted to the same LBAs, in which case they are moved to a holding queue
until the conflicting I/O completes. We therefore want to stop
synchronization before completing pending I/O in g_mirror_destroy_provider()
since this ensures that blocked I/O requests are completed as well.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Entries may be removed and freed if an I/O error occurs during mirror
synchronization, so we cannot assume that all entries of ds_bios are
valid.
Also ensure that a synchronization BIO's array index is preserved after
a successful write.
Reported and tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This patch adds a general mechanism for providing encryption keys to the
kernel from the boot loader. This is intended to enable GELI support at
boot time, providing a better mechanism for passing keys to the kernel
than environment variables. It is designed to be extensible to other
applications, and can easily handle multiple encrypted volumes with
different keys.
This mechanism is currently used by the pending GELI EFI work.
Additionally, this mechanism can potentially be used to interface with
GRUB, opening up options for coreboot+GRUB configurations with completely
encrypted disks.
Another benefit over the existing system is that it does not require
re-deriving the user key from the password at each boot stage.
Most of this patch was written by Eric McCorkle. It was extended by
Allan Jude with a number of minor enhancements and extending the keybuf
feature into boot2.
GELI user keys are now derived once, in boot2, then passed to the loader,
which reuses the key, then passes it to the kernel, where the GELI module
destroys the keybuf after decrypting the volumes.
Submitted by: Eric McCorkle <eric@metricspace.net> (Original Version)
Reviewed by: oshogbo (earlier version), cem (earlier version)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9575
In GELI, anywhere we are zeroing out possibly sensitive data, like
the metadata struct, the metadata sector (both contain the encrypted
master key), the user key, or the master key, use explicit_bzero.
Didn't touch the bzero() used to initialize structs.
Reviewed by: delphij, oshogbo
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9809
A request may be queued while the queue lock is dropped when the mirror is
being destroyed. The corresponding wakeup would be lost, possibly resulting
in an apparent hang of the mirror worker thread.
Tested by: pho (part of a larger patch)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The worker thread will destroy the mirror provider as part of its teardown
sequence. The call made sense in the initial revision of gmirror, but
became unnecessary in r137248.
Tested by: pho (part of a larger diff)
MFC afteR: 2 weeks
Sponsored by: Dell EMC Isilon
- Don't execute any of g_mirror_shutdown_post_sync() when panicking. We
cannot safely idle the mirror or stop synchronization in that state, and
the current attempts to do so complicate debugging of gmirror itself.
- Check for a non-NULL panicstr instead of using SCHEDULER_STOPPED(). The
latter was added for use in the locking primitives.
Reviewed by: mav, pjd
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
gpart(8) has functionality to change the label of an GPT partition.
This functionality works like it should, however, after a label change
the /dev/gpt/ entries remain unchanged. glabel(8) status output remains
unchanged. The change only takes effect after a reboot.
PR: 162690
Submitted by: sub.mesa@gmail, Ben RUBSON <ben.rubson@gmail.com>, ae
Reviewed by: allanjude, bapt, bcr
MFC after: 6 weeks.
Differential Revision: https://reviews.freebsd.org/D9935
