Unlike most other PHYs there is no easy way to know which media
type the PHY supports on Marvell PHYs. MIIF_HAVEFIBER flags is now
passed via bus-specific instance variable of a device. While I'm
here add 88E1112 specific work around to set SIGDET polarity low.
Many thanks "Eugene Perevyazko <john <> dnepro dot net>" who kindly
gave remote access to system with DGE-560SX.
offloading. Datasheet said nothing about the limitation of 82559ER
except WOL. Explicitly disable Rx checksum offloading for
controllers that is known to lack the capability.
PR: kern/138135
Tested by: Gooderum, Mark < mgooderum <> websense dot com >
Who knew that "svn export" was an actual command, or that I would have
vfs_export.c stuck in my mind deep enough to type "export" instead of
"commit"?
Pointy Hat to: jamie
are currently two problems with the use of 1GB page mappings by the direct
map. First, at least one device driver uses pmap_extract() rather than
DMAP_TO_PHYS() to translate a direct map address to a physical address.
Unfortunately, neither pmap_extract() nor pmap_kextract() yet support 1GB
page mappings. Second, pmap_bootstrap() needs to interrogate the MTRRs to
ensure that a 1GB page mapping doesn't span two MTRRs of different types.
Reported and tested by: Daniel O'Connor
MFC after: 3 days
- F_READAHEAD: specify the amount for sequential access. The amount is
specified in bytes and is rounded up to nearest block size.
- F_RDAHEAD: Darwin compatible version that use 128KB as the sequential
access size.
A third argument of zero disables the read-ahead behavior.
Please note that the read-ahead amount is also constrainted by sysctl
variable, vfs.read_max, which may need to be raised in order to better
utilize this feature.
Thanks Igor Sysoev for proposing the feature and submitting the original
version, and kib@ for his valuable comments.
Submitted by: Igor Sysoev <is rambler-co ru>
Reviewed by: kib@
MFC after: 1 month
contained only SLIST_HEAD as its member, thus sizeof(struct klist) would
equal to sizeof(struct klist *), so this change makes the code more
correct in terms of semantics, but should be a no-op to compiler at this
time.
Reported by: MQ <antinvidia at gmail com>
- Add quirk for ATI SB600 and SB700 to free SMB controller
- Correct schedule sleep time to 10us on the VIA ehci controller
Reported by: Dorian B<FC>ttner, Andriy Gapon
Submitted by: Hans Petter Selasky
- clean up USB detach logic. There seems to be some problems detaching multiple
USB HUBs connected in series from the root.
- after this patch the rule is:
1) Always use device_detach() on the USB HUB first.
2) Never just device_delete_child() on the USB HUB, because that function
will traverse to all the device leaves and free them first, and then the USB
stack will free the devices twice which doesn't work very well.
- make sure the did DMA delay gets set after the timeout has elapsed to make
logic more clear. There is no functional difference.
Submitted by: Hans Petter Selasky
Right now if applications want to use the mouse on the command line,
they use sysmouse(4) and install a signal handler in the kernel to
deliver signals when mouse events arrive. This conflicts with my plan to
change to TERM=xterm, so implement proper VT200-style mouse input.
Because mouse input is now streamed through the TTY, it means you can
now SSH to another system on the console and use the mouse there as
well. The disadvantage of the VT200 mouse protocol, is that it doesn't
seem to generate events when moving the cursor. Only when pressing and
releasing mouse buttons.
There are different protocols as well, but this one seems to be most
commonly supported.
Reported by: Paul B. Mahol <onemda gmail com>
Tested with: vim(1)
This is done to make it harder to exploit kernel NULL pointer security
vulnerabilities. While this of course does not fix vulnerabilities,
it does mitigate their impact.
Note that this may break some applications, most likely emulators or
similar, which for one reason or another require mapping memory at
zero.
This restriction can be disabled with the security.bsd.mmap_zero
sysctl variable.
Discussed with: rwatson, bz
Tested by: bz (Wine), simon (VirtualBox)
Submitted by: jhb
This completes the fix from r185586.
PR: kern/139059
Reported by: Daniel Braniss <danny@cs.huji.ac.il>
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
Tested by: Daniel Braniss <danny@cs.huji.ac.il>
MFC after: 3 days
It is quite inconvenient that if an application for xterm uses 256 color
mode, text suddenly starts to blink (because of ;5; in the middle).
We'd better just implement 256 color mode and add a conversion routine
from 256 to 8 color mode, which doesn't seem to be too bad in practice.
Remapping colors is done quite simple. If one of the channels is most
actively represented, primary colors are used. If two channels are most
actively represented, secondary colors are used. If all three channels
are equal (gray), it picks between black and white.
Reported by: Paul B. Mahol <onemda gmail com>
In some cases events may occur that move the cursor outside the
scrolling region while in origin mode, which is normally not possible.
Events like these include:
- Alignment test.
- Restore cursor.
Properly switch off origin mode in these cases.
MFC after: 1 month
devices that we also support, just not by default (thus only LINT or
module builds by default).
While currently there is only "/dev/full" [2], we are planning to see more
in the future. We may decide to change the module/dependency logic in the
future should the list grow too long.
This is not part of linux.ko as also non-linux binaries like kFreeBSD
userland or ports can make use of this as well.
Suggested by: rwatson [1] (name)
Submitted by: ed [2]
Discussed with: markm, ed, rwatson, kib (weeks ago)
Reviewed by: rwatson, brueffer (prev. version)
PR: kern/68961
MFC after: 6 weeks
unmount. In that case we cannot depend on the proper order of invalidating
vnodes, so we have to free resources when we have a chance.
PR: kern/139062
Reported by: trasz
MFC after: 3 days
