- Change default sort method to mergesort, which has a better worst case
performance than qsort
Submitted by: Oleg Moskalenko <oleg.moskalenko@citrix.com>
living process as a zombie and refuses to kill it. The cause is that
the code masks ki_stat with SZOMB to compare with SZOMB, but ki_stat
is not a mask.
Possibly reported by: cperciva
MFC after: 3 days
Free can properly handle NULL pointer (but keep free() call on the premise
that the code might be reused).
Show errno when realloc failed.
MFC after: 3 days
usage on hosts using ZFS. The new line displays the total amount of RAM
used by the ARC along with the size of MFU, MRU, anonymous (in flight),
headers, and other (miscellaneous) sub-categories. The line is not
displayed on systems that are not using ZFS.
Reviewed by: avg, fs@
MFC after: 3 days
"gnusort". Most of the BSD sort development work was done by
Oleg Moskalenko <oleg.moskalenko@citrix.com>.
- GNU grep can be set to default by setting WITH_GNU_GREP. It will cause
BSD sort to be installed as "bsdsort".
Portbuild tested by: linimon
(x86 assembler optimization disabled for now because it
requires the new .cfi_* directives that is not supported
by base system binutils).
MFC after: 1 week
is not correct. The code works by accident because gzFile is
currently defined as void *, and internally it would be casted from
or to its real type.
A newer version of zlib will instead define it as a pointer to a
specific type pointer (namely, struct gzFile_s *). This therefore
would cause stricter checks and compiler would catch this type
mismatch.
This change does not cause any changes to the resulting binary,
as validated with md5(1).
MFC after: 3 days
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
both places where they are mentioned in find(1).
Discussed with: dougb
PR: docs/168885
Reported by: Ronald F. Guilmette (rfg at tristatelogic dot com)
Approved by: gabor (mentor)
MFC after: 3 days
This is much like -t but with a different format which is ISO8601-like and
allows fractions of a second.
The precision is limited to microseconds because of utimes() and friends,
even though stat() returns nanoseconds.
MFC after: 10 days
modifiers for ":tu" and ":tl" from OSF's ODE, which made its way into
NetBSD's make, which is the source for the Portable Berkeley Make.
Submitted by: Simon Gerraty <sjg@juniper.net>
- Do not use mmap() by default; it can be enabled by --mmap
- Add some minor optimizations for -u
- Update manual page according to the changes
Submitted by: Oleg Moskalenko <oleg.moskalenko@citrix.com>
On ARM, binutils are adding '$a' symbols in the symbol table for
every function (in addition to normal symbol). When gprof(1) looks
up symbol name, it often reads '$a' instead of proper function name,
because it find it first. With this fix, when read symbol name
begins with '$' and previous symbol has the same address, it will
use previous symbol name (which is proper function name).
Obtained from: Semihalf
Revamp the CAM enclosure services driver.
This updated driver uses an in-kernel daemon to track state changes and
publishes physical path location information\for disk elements into the
CAM device database.
Sponsored by: Spectra Logic Corporation
Sponsored by: iXsystems, Inc.
Submitted by: gibbs, will, mav
- old yacc(1) use to magicially append stdlib.h, while new one don't
- new yacc(1) do declare yyparse by itself, fix redundant declaration of
'yyparse'
Approved by: des (mentor)
bison, keeping full compatibility with our previous yacc implementation.
Also bring the ability to create reentrant parser
This fix bin/140309 [1]
PR: bin/140309 [1]
Submitted by: Philippe Pepiot <ksh@philpep.org> [1]
Approved by: des (mentor)
MFC after: 1 month
"bsdsort" and GNU sort will be the default "sort". When WITH_BSD_SORT
is set, BSD sort will be the default "sort" and GNU sort will be installed
as "gnusort".
with the major functionality and optimizations by Oleg Moskalenko.
It is compatible with the latest version of POSIX and the current GNU sort
version that we have in base. Beside this, it implements all the
functionality introduced in later versions of GNU sort. For now, it will
be installed as "bsdsort", keeping GNU sort as the default sort
implementation.
64 bits platforms. Let rtld(1) decide if it needs to honor it
or not.
While here, fix a small bug in error reporting when asprintf(3)
returns an error.
Submitted by: kib
Reviewed by: kib (mentor)
MFC after: 1 week
This tool changes the default buffering behaviour of standard
stdio streams.
It only works on dynamic binaries. To make it work for static
ones it would require cluttering stdio because there no single
entry point.
PR: 166660
Reviewed by: current@, jhb
Approved by: kib (mentor)
MFC after: 1 week
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
a pair of records similar to syscall entry and return that a user can
use to determine how long page faults take. The new ktrace records are
enabled via the 'p' trace type, and are enabled in the default set of
trace points.
Reviewed by: kib
MFC after: 2 weeks
via procstat(1) and fstat(1):
- Change shm file descriptors to track the pathname they are associated
with and add a shm_path() method to copy the path out to a caller-supplied
buffer.
- Use the fo_stat() method of shared memory objects and shm_path() to
export the path, mode, and size of a shared memory object via
struct kinfo_file.
- Add a struct shmstat to the libprocstat(3) interface along with a
procstat_get_shm_info() to export the mode and size of a shared memory
object.
- Change procstat to always print out the path for a given object if it
is valid.
- Teach fstat about shared memory objects and to display their path,
mode, and size.
MFC after: 2 weeks
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
- Fix wrong scaling in the bc.library.
- Let length(0.000) conform to what gnu bc does.
PR: bin/159227
Submitted by: AIDA Shinra <shinra at j10n dot org>
__uint16_t, we can partially undo r228668.
Note the remark "Work around a clang false positive with format string
warnings and ntohs macros (see LLVM PR 11313)" was actually incorrect.
Before r232745, on some arches, the ntohs() macros did in fact return
int, not uint16_t, so clang was right in warning about the %hu format
string.
MFC after: 2 weeks
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
This is harmless because srandom() is called somewhere else, with time(NULL)
as a seed, but this is more correct.
Obtained from: https://bitbucket.org/mux/csup
Pointyhat to: not mux, somebody else
MFC after: 1 week
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.
Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)
As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:
CC=clang
CXX=clang++
CPP=clang-cpp
MFC after: 2 weeks
Some of new features:
- New readers: RAR, LHA/LZH, CAB reader, 7-Zip
- New writers: ISO9660, XAR
- Improvements to many formats, especially including ISO9660 and Zip
- Stackable write filters to write, e.g., tar.gz.uu in a single pass
- Exploit seekable input; new "seekable" Zip reader can exploit the Zip
Central Directory when it's available; the old "streamable" Zip reader
is still fully supported for cases where seeking is not possible.
Full release notes available at:
https://github.com/libarchive/libarchive/wiki/ReleaseNotes
If a utility called by xargs exits with status 255 or because of a signal,
POSIX requires writing an error message.
PR: 165155
Submitted by: Matthew Story matthewstory gmail com
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.
I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.
MFC after: 1 month
According to POSIX, -a is equal to -bdlprtTu. It seems this is not true
in practice, as -b normally restricts the output to BOOT_TIME entries
and all implementations that I know of don't.
rpcgen will search the current PATH for the preprocessor. This makes it
possible to run a preprocessor built during the cross-tools stage of
buildworld.
MFC after: 1 week
