make tinderbox now passes with this warning enabled as a fatal error,
so revert the change to hide it in preparation for making it fatal.
This reverts commit e8e691983b.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34948
When FreeBSD is running as dom0 (initial domain) on a Xen system it
has access to the native ACPI tables and is the OSPM. However the
hypervisor is the entity in charge of the CPU idle and frequency
states, and in order to perform this duty it requires information
found the ACPI dynamic tables that can only be parsed by the OSPM.
Introduce a new Xen specific ACPI driver to fetch the Processor
related information and upload it to Xen. Note that this driver needs
to take precedence over the generic ACPI CPU driver when running as
dom0, so downgrade the probe score of the native driver to
BUS_PROBE_DEFAULT in order for the Xen specific driver to use
BUS_PROBE_SPECIFIC.
Tested on an Intel NUC to successfully parse and upload both the Cx and
Px states to Xen.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb kib
Differential revision: https://reviews.freebsd.org/D34841
Use -Wno-unused-but-set-variable for kernel builds with clang13.
To turn this warning back on, set the following in src.conf:
WITH_SET_BUT_NOTUSED_KERNEL_WARNINGS=
Reviewed by: mjg, imp
Differential Revision: https://reviews.freebsd.org/D34784
This dumper can instantiate and write the dump's contents to a
file-backed vnode.
Unlike existing disk or network dumpers, the vnode dumper should not be
invoked during a system panic, and therefore is not added to the global
dumper_configs list. Instead, the vnode dumper is constructed ad-hoc
when a live dump is requested using the new ioctl on /dev/mem. This is
similar in spirit to a kgdb session against the live system via
/dev/mem.
As described briefly in the mem(4) man page, live dumps are not
guaranteed to result in a usuable output file, but offer some debugging
value where forcefully panicing a system to dump its memory is not
desirable/feasible.
A future change to savecore(8) will add an option to save a live dump.
Reviewed by: markj, Pau Amma <pauamma@gundo.com> (manpages)
Discussed with: kib
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D33813
- Adds FW logging support
- Once enabled, this lets the firmware print event and error messages
to the log, increasing the visibility into what the hardware is
doing; this is useful for debugging
- General bug fixes
- Adds inital DCB support to the driver
- Notably, this adds support for DCBX to the driver; now with the
fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX
configuration sent from a link partner
- Adds statistcs sysctls for priority flow control frames
- Adds new configuration sysctls for DCB-related features: (VLAN) user
priority to TC mapping; ETS bandwidth allocation; priority flow
control
- Remove unused SR-IOV files (until support gets added)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Tested by: jeffrey.e.pieper@intel.com
MFC after: 3 days
MFC with: 213e91399b, e438f0a975
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D34024
Define NO_WUNUSED_BUT_SET_VARIABLE for newer clang, and use it in ATH_C
to account for different clang versions. Use it in Makefiles as well.
Sponsored by: Netflix
Reviewed by: kevans, jhb
Differential Revision: https://reviews.freebsd.org/D34408
The ath driver has a lot of these warnings. It's an older driver, so
just supress these warnings until they can be fixed. They are a mix of
simple dead stores, debubgging output and stuff that would require
careful study to know if its safe to remove the access or not (there are
likely very few of the latter, but if there are any they are latent bugs
that compiler could optimize away). Since I have no ath hardware to test
on anymore, take the conservative approach.
Sponsored by: Netflix
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
Boottrace is a facility for capturing trace events during boot and
shutdown. This includes kernel initialization, as well as rc. It has
been used by NetApp internally for several years, for catching and
diagnosing slow devices or subsystems. It is driven from userspace by
sysctl interface, and the output is a human-readable log of events
(kern.boottrace.log).
This commit adds the core boottrace functionality implementing these
interfaces. Adding the trace annotations themselves to kernel and
userland will happen in follow-up commits. A future commit will also add
a boottrace(4) man page.
For now, boottrace is unconditionally compiled into the kernel but
disabled by default. It can be enabled by setting the
kern.boottrace.enabled tunable to 1 in loader.conf(5).
There is an existing boot-time event tracing facility, which can be
compiled into the kernel with 'options TSLOG'. While there is some
functional overlap between this and boottrace, they are distinct. TSLOG
is suitable for generating detailed timing information and flamegraphs,
and has been used to great success by cperciva@ to diagnose and reduce
the overall system boot time. Boottrace aims to more quickly provide an
overview of timing and resource usage of the boot (and shutdown) process
to a sysadmin who requires this knowledge.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D30184
mmc_helper have an hard dependency on gpio_if.h
gpio(4) isn't in the default x86 kernel and none of the x86
sd/mmc drivers uses mmc_helper so just add a dependency on gpio.
Fixes: 85b3794cee ("files: Make ext_resources non-optional")
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33834
Some IIC multifunction devices may have multiple I2C addresses per chip, but
only the primary address is listed in the DT (e.g. MAX776200). In this case,
the sub-devices for the secondary addresses must be created manually with
fixed OFW parameters (node, name, compatibility string, IIC address).
Add a bus method to the ofw_iicbus interface that does this.
MFC after: 4 weeks
Deleting hack.c cause the kernel to always be out of date:
$ make kernel
make: /usr/src/sys/amd64/compile/GENERIC/.depend.hack.pico, 1:
ignoring stale .depend for hack.c
:> hack.c
cc -shared -O2 -pipe ... -nostdlib hack.c -o hack.pico
rm -f hack.c
MAKE="make" sh ../../../conf/newvers.sh "-R" GENERIC
cc -c -O2 -pipe ... -std=iso9899:1999 -Werror vers.c
ctfconvert -L VERSION -g vers.o
linking kernel.full
Keeping hack.c in the compile directory causes no harm,
so there's no reason to delete it.
Also rename the file to "force-dyamic-hack.c" so it is
clear what the hack is aboug.
Reviewed by: sjg
Differential Revision: https://reviews.freebsd.org/D34281
GCC is more pedantic than clang about warning when a function doesn't
handle undefined enum values (see GCC bug 87950). Clang's warning
gives a more pragmatic coverage and should find any real bugs, so
disable the warning for GCC rather than adding __unreachable
annotations to appease GCC.
Reviewed by: imp, emaste
Differential Revision: https://reviews.freebsd.org/D34147
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
clang doesn't implement it, and Linux doesn't enforce it. As a
result, new instances keep cropping up both in FreeBSD's code and in
upstream sources from vendors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34144
Reduce the burden to maintain correct and
extensible ECN related code across multiple
stacks and codepaths.
Formally no functional change.
Incidentially this establishes correct
ECN operation in one instance.
Reviewed By: rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34162
Reduce the burden to maintain correct and
extensible ECN related code across multiple
stacks and codepaths.
Formally no functional change.
Incidentially this establishes correct
ECN operation in one instance.
Reviewed By: rrs, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34162
TLS RX support is modeled after TLS TX support. The basic structures and layouts
are almost identical, except that the send tag created filters RX traffic and
not TX traffic.
The TLS RX tag keeps track of past TLS records up to a certain limit,
approximately 1 Gbyte of TCP data. TLS records of same length are joined
into a single database record.
Regularly the HW is queried for TLS RX progress information. The TCP sequence
number gotten from the HW is then matches against the database of TLS TCP
sequence number records and lengths. If a match is found a static params WQE
is queued on the IQ and the hardware should immediately resume decrypting TLS
data until the next non-sequential TCP packet arrives.
Offloading TLS RX data is supported for untagged, prio-tagged, and
regular VLAN traffic.
MFC after: 1 week
Sponsored by: NVIDIA Networking
This change adds convenience functions to setup a flow steering rule based on
a TCP socket. The helper function gets all the address information from the
socket and returns a steering rule, to be used with HW TLS RX offload.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Internal send queues are regular sendqueues which are reserved for WQE commands
towards the hardware and firmware. These queues typically carry resync
information for ongoing TLS RX connections and when changing schedule queues
for rate limited connections.
The internal queue, IQ, code is more or less a stripped down copy
of the existing SQ managing code with exception of:
1) An optional single segment memory buffer which can be read or
written as a whole by the hardware, may be provided.
2) An optional completion callback for all transmit operations, may
be provided.
3) Does not support mbufs.
MFC after: 1 week
Sponsored by: NVIDIA Networking
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
