but GNU libc used it without checking its kernel version, e. g., Fedora 10.
- Move pipe(2) implementation for Linuxulator from MD files to MI file,
sys/compat/linux/linux_file.c. There is no MD code for this syscall at all.
- Correct an argument type for pipe() from l_ulong * to l_int *. Probably
this was the source of MI/MD confusion.
Reviewed by: emulation
fifo_iseof() condition, allowing the v_fifoinfo to be reset and freed
by fifo_cleanup().
Precalculate EOF at the places were fo_wgen is changed, and cache the
state in a new pipe state flag PIPE_SAMEWGEN.
Reported and tested by: bf
Submitted by: gianni
MFC after: 1 week (a backport)
following clang warning:
sys/kern/sys_pipe.c:1556:10: error: promoted type 'int' of K&R function parameter is not compatible with the parameter type 'mode_t'
(aka 'unsigned short') declared in a previous prototype [-Werror]
mode_t mode;
^
sys/kern/sys_pipe.c:155:19: note: previous declaration is here
static fo_chmod_t pipe_chmod;
^
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
The reverse direction of a pipe is lazily allocated on the first write in
that direction (because pipes are usually used in one direction only). A
special case is needed to ensure the pipe appears writable before the first
write because there are 0 bytes of pending data in 0 bytes of buffer space
at that point, leaving 0 bytes of data that can be written with the normal
code.
Note that the first write returns [ENOMEM] if kern.ipc.maxpipekva is
exceeded and does not block or return [EAGAIN], so selecting true for write
is correct even in that case.
PR: kern/93685
Submitted by: gianni
MFC after: 2 weeks
Optimize for the case, by lazily allocating the pipe inode number at the
fstat(2) time. If alloc_unr(9) returns failure, do not fail fstat(2), since
uses of inode numbers are even rare then fstat(2), but provide zero inode
forever. Note that alloc_unr() failure is unlikely due to total number
of pipes in the system limited by the number of file descriptors.
Based on the submission by: gianni
MFC after: 2 weeks
-1. But, because ino_t is unsigned, this case was not covered by the
test ino > 0 in pipeclose(), leading to the free_unr(-1). Fix it by
explicitely comparing with 0 and -1. [1]
Do no access freed memory, the inode number was cached to prevent access
to cpipe after it possibly was freed, but I failed to commit the right
patch.
Noted by: gianni [1]
Pointy hat to: kib
MFC after: 3 days
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
to implement fchown(2) and fchmod(2) support for several file types
that previously lacked it. Add MAC entries for chown/chmod done on
posix shared memory and (old) in-kernel posix semaphores.
Based on the submission by: glebius
Reviewed by: rwatson
Approved by: re (bz)
since before r127501. Strictly speaking, the buffer pages are not
"wired". They remain in the paging queues. However, they are pinned in
memory using vm_page_hold().
architecture from page queue lock to a hashed array of page locks
(based on a patch by Jeff Roberson), I've implemented page lock
support in the MI code and have only moved vm_page's hold_count
out from under page queue mutex to page lock. This changes
pmap_extract_and_hold on all pmaps.
Supported by: Bitgravity Inc.
Discussed with: alc, jeffr, and kib
A nice thing about POSIX 2008 is that it finally standardizes a way to
obtain file access/modification/change times in sub-second precision,
namely using struct timespec, which we already have for a very long
time. Unfortunately POSIX uses different names.
This commit adds compatibility macros, so existing code should still
build properly. Also change all source code in the kernel to work
without any of the compatibility macros. This makes it all a less
ambiguous.
I am also renaming st_birthtime to st_birthtim, even though it was a
local extension anyway. It seems Cygwin also has a st_birthtim.
when all writers, observed by reader, exited. Use writer generation
counter for fifo, and store the snapshot of the fifo generation in the
f_seqcount field of struct file, that is otherwise unused for fifos.
Set FreeBSD-undocumented POLLINIGNEOF flag only when file f_seqcount is
equal to fifo' fi_wgen, and revert r89376.
Fix POLLINIGNEOF for sockets and pipes, and return POLLHUP for them.
Note that the patch does not fix not returning POLLHUP for fifos.
PR: kern/94772
Submitted by: bde (original version)
Reviewed by: rwatson, jilles
Approved by: re (kensmith)
MFC after: 6 weeks (might be)
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
address space sizes to be longs instead of ints. Specifically, the follow
values are now longs: runningbufspace, bufspace, maxbufspace,
bufmallocspace, maxbufmallocspace, lobufspace, hibufspace, lorunningspace,
hirunningspace, maxswzone, maxbcache, and maxpipekva. Previously, a
relatively small number (~ 44000) of buffers set in kern.nbuf would result
in integer overflows resulting either in hangs or bogus values of
hidirtybuffers and lodirtybuffers. Now one has to overflow a long to see
such problems. There was a check for a nbuf setting that would cause
overflows in the auto-tuning of nbuf. I've changed it to always check and
cap nbuf but warn if a user-supplied tunable would cause overflow.
Note that this changes the ABI of several sysctls that are used by things
like top(1), etc., so any MFC would probably require a some gross shims
to allow for that.
MFC after: 1 month
- Use `fildes[2]' instead of `*fildes' to make more clear that pipe(2)
fills an array with two descriptors.
- Remove EFAULT from the manual page. Because of the current calling
convention, pipe(2) raises a segmentation fault when an invalid
address is passed.
- Introduce kern_pipe() to make it easier for binary emulations to
implement pipe(2).
- Make Linux binary emulation use kern_pipe(), which means we don't have
to recover td_retval after calling the FreeBSD system call.
Approved by: rdivacky
Discussed on: arch
PIPE_MTX().
Since the pipe_present is cleared before (potentially) sleeping, the
second thread may enter the pipeclose() for the reciprocal pipe end.
The test at the end of the pipeclose() for the pipe_present == 0 would
succeed, allowing the second thread to free the pipe memory. First
threads then accesses the freed memory after being woken up.
Properly track the closing state of the pipe in the pipe_present.
Introduce the intermediate state that marks the pipe as mostly
dismantled but might be sleeping waiting for the knote list to be
cleared. Free the pipe pair memory only when both ends pass that point.
Debugging help and tested by: pho
Discussed with: jmg
MFC after: 2 weeks
monitoring the pipe. The code sets pipe_present = 0 and enters
knlist_cleardel(), where the PIPE_MTX might be dropped when knl->kl_list
cannot be cleared due to influx knotes.
If the following often encountered code fragment
if (!(kn->kn_status & KN_DETACHED))
kn->kn_fop->f_detach(kn);
knote_drop(kn, td); [1]
is executed while the knlist lock is dropped, then the knote memory is freed
by the knote_drop() without knote being removed from the knlist, since
the filt_pipedetach() contains the following:
if (kn->kn_filter == EVFILT_WRITE) {
if (!cpipe->pipe_peer->pipe_present) {
PIPE_UNLOCK(cpipe);
return;
Now, the memory may be reused in the zone, causing the access to the
freed memory. I got the panics caused by the marker knote appearing on
the knlist, that, I believe, manifestation of the issue. In the Peter
Holm test scenarious, we got unkillable processes too.
The pipe_peer that has the knote for write shall be present. Ignore the
pipe_present value for EVFILT_WRITE in filt_pipedetach().
Debugging help and tested by: pho
Discussed with: jmg
MFC after: 2 weeks
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
details from consumers.
- Track individual selecters on a per-descriptor basis such that there
are no longer collisions and after sleeping for events only those
descriptors which triggered events must be rescaned.
- Protect the selinfo (per descriptor) structure with a mtx pool mutex.
mtx pool mutexes were chosen to preserve api compatibility with
existing code which does nothing but bzero() to setup selinfo
structures.
- Use a per-thread wait channel rather than a global wait channel.
- Hide select implementation details in a seltd structure which is
opaque to the rest of the kernel.
- Provide a 'selsocket' interface for those kernel consumers who wish to
select on a socket when they have no fd so they no longer have to
be aware of select implementation details.
Tested by: kris
Reviewed on: arch
o buffered write, for chunks smaller than PIPE_MINDIRECT bytes
o direct write, for everything else
A call to writev(2) may receive struct iov of various size and the
kernel may have to switch from one solution to the other. Before doing
this, it must wake reader processes and any select/poll/kqueue up.
This commit fixes a bug where select/poll/kqueue are not triggered
when switching from buffered write to direct write. It adds calls to
pipeselwakeup().
I give more details on freebsd-arch@:
http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html
This should fix issues with Erlang (lang/erlang) and kqueue.
Reported by: Rickard Green (Erlang)
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
existing UMA statistics for pipes, and allows us to get rid of both the
per-pipe dtor and two atomic operations per pipe required to maintain
the counter.
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
- Move sonewconn(), which creates new sockets for incoming connections on
listen sockets, so that all socket allocate code is together in
uipc_socket.c.
- Move 'maxsockets' and associated sysctls to uipc_socket.c with the
socket allocation code.
- Move kern.ipc sysctl node to uipc_socket.c, add a SYSCTL_DECL() for it
to sysctl.h and remove lots of scattered implementations in various
IPC modules.
- Sort sodealloc() after soalloc() in uipc_socket.c for dependency order
reasons. Statisticize soalloc() and sodealloc() as they are now
required only in uipc_socket.c, and are internal to the socket
implementation.
After this change, socket allocation and deallocation is entirely
centralized in one file, and uipc_socket2.c consists entirely of socket
buffer manipulation and default protocol switch functions.
MFC after: 1 month
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
they both happen before pipe backing allocation occurs. Previously,
a pipe memory shortage would cause a panic due to a KNOTE call
on an uninitialized si_note.
Reported by: Peter Holm
MFC after: 1 week
release the pipe mutex before calling fsetown(), as fsetown()
may block. The sigio code protects the pipe sigio data using
its own mutex, and the pipe reference count held by the caller
will prevent the pipe from being prematurely garbage-collected.
Discovered by: imp
