Commit Graph

83 Commits

Author SHA1 Message Date
Alexander Motin
643d18260b Update list of 4K physical sector hard drives. 2011-12-22 23:50:31 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Alexander Motin
10a6c3584a Higher-priority initialization request can eat request scheduling done from
adaclose(). Add immediate_priority check into adaschedule() to restore it.

Approved by:	re (kib)
MFC after:	1 week
2011-07-30 21:42:53 +00:00
Alexander Motin
1ed6aaf99e Add control for ATA disk read-ahead, alike to the previously added write
cache control. Some controller BIOS'es tend to disable read-ahead, that
dramatically reduces read performance. Previously ata(4) always enabled
read-ahead unconditionally.

Approved by:	re (kib)
2011-07-29 20:32:27 +00:00
Alexander Motin
c36bb43ca6 Do not try to execute FLUSHCACHE on close and print extra messages for
invalidated (considered lost) ada device. Exactly same already done for
the da devices.

Approved by:	re (kib)
MFC after:	1 week
2011-07-23 22:11:40 +00:00
Alexander Motin
ee2b236b98 Fix ATAPI breakage introduced by r223443. It made SCSI commands to ATAPI
device to never complete, that caused probe process (system boot) stuck.
2011-06-23 15:10:44 +00:00
Will Andrews
14f900e2cd Plumb support for the device advanced information CCB in the ATA XPT.
This was previously done only for SCSI XPT in r223081, on which the change
in r223089 depended in order to respond to serial number requests.  As a
result of r223089, da(4) and ada(4) devices register a d_getattr for geom to
use to obtain the information.

Reported by:	ache
Reviewed by:	ken
2011-06-22 21:43:10 +00:00
Konstantin Belousov
125c410fb2 Fix a typo in adagetattr() from r223089. In particular, this restores
the ability to use ahci(4) for kernel dumps.
2011-06-18 22:26:58 +00:00
Justin T. Gibbs
416494d7c9 Plumb device physical path reporting from CAM devices, through GEOM and
DEVFS, and make it accessible via the diskinfo utility.

Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Allow disk providers to implement a new method which can override
	  the default BIO_GETATTR response, d_getattr(struct bio *).  This
	  function returns -1 if not handled, otherwise it returns 0 or an
	  errno to be passed to g_io_deliver().

sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
	  is now responsible for returning this information via
	  d_getattr()->(a)dagetattr()->xpt_getatr().

sys/geom/geom_dev.c:
	- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
	  attribute "GEOM::physpath", if possible.  If the attribute request
	  returns a zero-length string, ENOENT is returned.

usr.sbin/diskinfo/diskinfo.c:
	- If the DIOCGPHYSPATH ioctl is successful, report physical path
	  data when diskinfo is executed with the '-v' option.

Submitted by:	will
Reviewed by:	gibbs
Sponsored by:	Spectra Logic Corporation

Add generic attribute change notification support to GEOM.

sys/sys/geom/geom.h:
	Add a new attrchanged method field to both g_class
	and g_geom.

sys/sys/geom/geom.h:
sys/geom/geom_event.c:
	- Provide the g_attr_changed() function that providers
	  can use to advertise attribute changes.
	- Perform delivery of attribute change notifications
	  from a thread context via the standard GEOM event
	  mechanism.

sys/geom/geom_subr.c:
	Inherit the attrchanged method from class to geom (class instance).

sys/geom/geom_disk.c:
	Provide disk_attr_changed() to provide g_attr_changed() access
	to consumers of the disk API.

sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
	Use attribute changed events to track updates to physical path
	information.

sys/cam/scsi/scsi_da.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, and
	the updated buffer type references our physical path
	attribute, emit a GEOM attribute changed event via the
	disk_attr_changed() API.

sys/cam/scsi/scsi_pass.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, update
	the physical patch devfs alias for this pass instance.

Submitted by:	gibbs
Sponsored by:	Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
Alexander Motin
8e6cab54e8 Do not report CFA devices as ATAPI, even though IDENTIFY data look alike. 2011-06-12 18:52:39 +00:00
Alexander Motin
1524677adf Increase maximum supported number of ranges per TRIM command from 256 to 512
to use full potential of Intel X25-M SSDs. On synthetic test with 32K ranges
it gives about 20% speedup, which probably costs more then 2K of RAM.
2011-06-03 07:25:36 +00:00
Alexander Motin
37ddbd16a5 When possible, join ranges of subsequest BIO_DELETE requests to handle more
(up to 2048 instead of 256 or even 64) of them with single TRIM request.

OCZ Vertex2/Vertex3 SSDs can handle no more then 64 ranges per TRIM request.
Due to lack of BIO_DELETE clustering now, it means that we could delete no
more then 2MB per request (on FS with 32K block) with limited request rate.
This change increases delete rate on Vertex2 from 250MB/s to 950MB/s.
2011-06-02 20:56:42 +00:00
Alexander Motin
d3a460d36c Add quirks to hint 4K physical sector (Advanced Format) for ATA disks not
reporting it properly (none? of known disks now).

Hitachi and WDC AF disks seem could be identified more or less formally.
For Seagate and Samsung enumerate some found models/series.
For other disks it can be forced with kern.cam.ada.X.quirks=1 tunable.
2011-05-31 09:22:52 +00:00
Alexander Motin
0d307e0905 - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
Alexander Motin
cf2b9a5f0f Add basic support for DMA-capable ATA disks on DMA-incapable controller.
This is really rare situation these days, but still may happen in embedded.
2011-04-20 13:27:50 +00:00
Alexander Motin
cfba3bd7a0 Remove some used variables.
Found with:	Clang Static Analyzer
2011-04-18 13:59:56 +00:00
Alexander Motin
c3d0d168ae Make ada(4) driver put ATA disks into sleep state on suspend.
Submitted by:	jkim (original version)
2011-04-15 07:07:29 +00:00
Alexander Motin
b8b6b5d37a Make CAM report devices with ATA/SATA transport to devstat(9) as IDE. 2011-04-14 21:25:32 +00:00
Alexander Motin
781338b6fd Fix typo in write_cache tunable name and move TUNABLE_INT_FETCH() out of
the SIM lock to fix WITNESS warning.

Reported by:	jh
2011-04-14 09:11:50 +00:00
Alexander Motin
276b083449 Properly log few more ATA commands used by the kernel. 2011-04-14 08:17:45 +00:00
Alexander Motin
8d169381e4 Improve SATA Asynchronous Notification feature support in CAM:
- make SATA SIMs announce capabilities to handle SDB with Notification bit;
 - make PMP driver honor this SIMs capability;
 - make SATA XPT to negotiate and enable this feature for ATAPI devices.

This feature allows supporting SATA ATAPI devices to inform system about
some events happened, that may require attention. In my case this allows
LG GH22LS50 SATA DVR-RW drive to report tray open/close events. Events
reported to CAM in form of AC_SCSI_AEN async. Further they could be used
as a hints for checking device status and reporting media change to upper
layers, for example, via spoiling mechanism of GEOM.
2011-04-13 16:20:54 +00:00
Alexander Motin
e3a6d3a4bf - Add kern.cam.ada.X.write_cache tunables/sysctls to control write caching
on per-device basis.
- While adding support for per-device sysctls, merge from graid branch
support for ADA_TEST_FAILURE kernel option, which opens few more sysctl,
allowing to simulate read and write errors for testing purposes.
2011-04-08 14:42:29 +00:00
Alexander Motin
f513d14ca4 Make ada(4) driver to control device write cache, same as ata(4) does.
Add kern.cam.ada.write_cache sysctl/tunable to control it alike hw.ata.wc.
2011-04-07 08:17:53 +00:00
Nathan Whitehorn
65cb6238bd Add the disk ident and a human-meaningful description (here, the disk model
string) to the geom_disk config XML so that they are easily accessible from
userland.

MFC after:	1 week
2011-02-26 14:58:54 +00:00
Alexander Motin
025e2c1221 In addition to r217444 ignore also ATA status errors on DMA Auto-Activation
enabling request. Some HP disks reported to return ABORT error there while
declaring support for this feature.
2011-01-26 06:57:48 +00:00
Alexander Motin
958e4a696f Make device initialization sequence shorter when possible. Do not enable/
disable already enabled/disabled SATA features.
2011-01-26 06:37:51 +00:00
Alexander Motin
26bdaeddd8 Some old WD SATA disks report supported and enabled device-initiated
interface power management, but return ABORT error on attempt to disable
it. Make CAM SATA probe sequence ignore this error, as it is not fatal.
2011-01-15 09:43:25 +00:00
Alexander Motin
c2b82f3e61 If HBA doesn't report user-enabled SATA capabilies (like ATA_CAM wrapper) -
handle all of them as disabled. This was original cause of the problem,
workarounded by r215453.

MFC after:	1 week
2010-11-18 13:38:33 +00:00
Rebecca Cran
fd104c151b Mostly revert r203420, and add similar functionality into ada(4) since the
existing code caused problems with some SCSI controllers.

A new sysctl kern.cam.ada.spindown_shutdown has been added that controls
whether or not to spin-down disks when shutting down.
Spinning down the disks unloads/parks the heads - this is
much better than removing power when the disk is still
spinning because otherwise an Emergency Unload occurs which may cause damage
to the actuator.

PR:	kern/140752
Submitted by:   olli
Reviewed by:	arundel
Discussed with: mav
MFC after:	2 weeks
2010-10-24 16:31:57 +00:00
Justin T. Gibbs
f03f7a0ca3 Correct bioq_disksort so that bioq_insert_tail() offers barrier semantic.
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.

The barrier semantics of bioq_insert_tail() were broken in two ways:

 o In bioq_disksort(), an added bio could be inserted at the head of
   the queue, even when a barrier was present, if the sort key for
   the new entry was less than that of the last queued barrier bio.

 o The last_offset used to generate the sort key for newly queued bios
   did not stay at the position of the barrier until either the
   barrier was de-queued, or a new barrier (which updates last_offset)
   was queued.  When a barrier is in effect, we know that the disk
   will pass through the barrier position just before the
   "blocked bios" are released, so using the barrier's offset for
   last_offset is the optimal choice.

sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
	o Update last_offset in bioq_insert_tail().

	o Only update last_offset in bioq_remove() if the removed bio is
	  at the head of the queue (typically due to a call via
	  bioq_takefirst()) and no barrier is active.

	o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
	  set prev to the barrier and cur to it's next element.  Now that
	  last_offset is kept at the barrier position, this change isn't
	  strictly necessary, but since we have to take a decision branch
	  anyway, it does avoid one, no-op, loop iteration in the while
	  loop that immediately follows.

	o In bioq_disksort(), bypass the normal sort for bios with the
	  BIO_ORDERED attribute and instead insert them into the queue
	  with bioq_insert_tail().  bioq_insert_tail() not only gives
	  the desired command order during insertion, but also provides
	  barrier semantics so that commands disksorted in the future
	  cannot pass the just enqueued transaction.

sys/sys/bio.h:
	Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.

sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
	Use an ordered command for SCSI/ATA-NCQ commands issued in
	response to bios with the BIO_ORDERED flag set.

sys/cam/scsi/scsi_da.c
	Use an ordered tag when issuing a synchronize cache command.

	Wrap some lines to 80 columns.

sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
	Mark bios with the BIO_FLUSH command as BIO_ORDERED.

Sponsored by:	Spectra Logic Corporation
MFC after:	1 month
2010-09-02 19:40:28 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Alexander Motin
25a519a918 ATA device reset starts probe sequence from the beginning. If reset caused
by timeout/error of one of probe commands, process may continue infinitely.
Make CAM ATA more robust to faulty devices and false positive detections,
abort probe after two restarts on timeouts or ten on other errors.
2010-07-06 19:05:41 +00:00
Alexander Motin
f1893540ff Add allocation error hadling.
Found with:   Coverity Prevent(tm)
CID:          3897
2010-06-05 09:31:13 +00:00
Alexander Motin
81bfc0fc44 Fix double free on error.
Found with:   Coverity Prevent(tm)
CID:          4573
2010-06-05 08:36:37 +00:00
Matt Jacob
0e85f214e3 Add a new primitive, XPT_SCAN_TGT, to cover the range between scanning a
whole bus (XPT_SCAN_BUS) and a single lun on that bus (XPT_SCAN_LUN).

It's less resource comsumptive than scanning a whole bus when the
caller knows only one target has changes.

Reviewed by:	scsi@
Sponsored by:	Panasas
MFC after:	1 month
2010-05-26 22:49:42 +00:00
Marius Strobl
4461491b3e Change ad_firmware_geom_adjust() to operate on a struct disk * only and
hook it up to ada(4) also. While at it, rename *ad_firmware_geom_adjust()
to *ata_disk_firmware_geom_adjust() etc now that these are no longer
limited to ad(4).

Reviewed by:	mav
MFC after:	3 days
2010-05-20 12:46:19 +00:00
Marius Strobl
f399274395 Remove unnecessary headers which were inherited from cam_xpt.c without
reason.

Reviewed by:	mav
MFC after:	3 days
2010-05-20 12:44:06 +00:00
Alexander Motin
da6808c111 Make SATA XPT negotiate and enable some additional SATA features, such as:
- device initiated power management (some devices support only this way);
 - Automatic Partial to Slumber Transition (more power saving);
 - DMA auto-activation (expected to slightly improve performance).
More features could be added later, when hardware supports.
2010-05-02 12:07:47 +00:00
Alexander Motin
e2a751891f Report PMP absence using target 15, same as for precence (not a wildcard),
to not confuse target ID checks at SIMs.
2010-04-30 07:56:21 +00:00
Alexander Motin
2eb4a8dcae Update device identify data and serial number when device change detected.
Reprobe immediately following this should have fresh data.
2010-04-27 15:59:38 +00:00
Alexander Motin
699f853bed MFp4:
Move PI_TAG_ABLE check from ada driver to ATA XPT.
2010-04-26 12:03:55 +00:00
Alexander Motin
1254b6802f Make PUIS detection more strict. Previous implementation caused false
positives on VMWare's virtual CD-ROMs.
2010-02-26 10:42:46 +00:00
Alexander Motin
57079b1773 Virtualize transport part of periph announcement. 2010-02-22 19:17:17 +00:00
Alexander Motin
639c2d4fad On probe error, if restart requested, skip any retries and recovery.
Just restart probe from the beginning immediately.
2010-02-04 18:56:38 +00:00
Alexander Motin
4ef08dc5a5 MFp4:
Add Power Up In Stand-by feature support. Device with PUIS enabled
require explicit command to do initial spin-up. Mark that command
with CAM_HIGH_POWER flag, to allow CAM manage staggered spin-up.
2010-02-03 10:06:03 +00:00
Alexander Motin
a9b8edb194 - Use separate buffer for identify data fetching. We can't use main buffer
here if device already running, as data need to be formatted before use.
- Remove some saved_ccb variables. They are unused now.
2010-02-02 18:03:21 +00:00
Alexander Motin
4cca153030 - Give ATA/SATA SIMs info about ATAPI packet size, supported by device.
- Make ATA XPT to reject longer SCSI CDBs then supported by device, or
any SCSI CDBs, if device doesn't support ATAPI.
2010-02-02 11:09:28 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
0025eb12c8 - Report SATA in legacy emulation mode still as SATA.
- Make ATA XPT able to handle such case.
2010-01-10 09:20:56 +00:00