confusing.
Note there is still no information about 'partcode' being written to disk
(gpart bootcode -p <partcode> <disk>).
Maybe in the future all the messages printed by gpart(8) on success could be
hidden under -v?
PR: bin/150239
Reported by: Roddi <roddi@me.com>
Submitted by: arundel
MFC after: 2 weeks
understand everything correctly, we don't really need it.
- Provide default numeric value as strings. This allows to simplify
a lot of code.
- Bump version number.
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.
The barrier semantics of bioq_insert_tail() were broken in two ways:
o In bioq_disksort(), an added bio could be inserted at the head of
the queue, even when a barrier was present, if the sort key for
the new entry was less than that of the last queued barrier bio.
o The last_offset used to generate the sort key for newly queued bios
did not stay at the position of the barrier until either the
barrier was de-queued, or a new barrier (which updates last_offset)
was queued. When a barrier is in effect, we know that the disk
will pass through the barrier position just before the
"blocked bios" are released, so using the barrier's offset for
last_offset is the optimal choice.
sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
o Update last_offset in bioq_insert_tail().
o Only update last_offset in bioq_remove() if the removed bio is
at the head of the queue (typically due to a call via
bioq_takefirst()) and no barrier is active.
o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
set prev to the barrier and cur to it's next element. Now that
last_offset is kept at the barrier position, this change isn't
strictly necessary, but since we have to take a decision branch
anyway, it does avoid one, no-op, loop iteration in the while
loop that immediately follows.
o In bioq_disksort(), bypass the normal sort for bios with the
BIO_ORDERED attribute and instead insert them into the queue
with bioq_insert_tail(). bioq_insert_tail() not only gives
the desired command order during insertion, but also provides
barrier semantics so that commands disksorted in the future
cannot pass the just enqueued transaction.
sys/sys/bio.h:
Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.
sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
Use an ordered command for SCSI/ATA-NCQ commands issued in
response to bios with the BIO_ORDERED flag set.
sys/cam/scsi/scsi_da.c
Use an ordered tag when issuing a synchronize cache command.
Wrap some lines to 80 columns.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
Mark bios with the BIO_FLUSH command as BIO_ORDERED.
Sponsored by: Spectra Logic Corporation
MFC after: 1 month
but because of a bug it was a no-op, so we were still using offsets in native
byte order for the host. Do it properly this time, bump version to 4 and set
the G_ELI_FLAG_NATIVE_BYTE_ORDER flag when version is under 4.
MFC after: 2 weeks
via %s
Most of the cases looked harmless, but this is done for the sake of
correctness. In one case it even allowed to drop an intermediate buffer.
Found by: clang
MFC after: 2 week
deadlock fixed in r207671.
- Wait for worker process to exit at class unload. The worker process
was not guaranteed to exit before the linker unloaded the module.
- Use 0 as the worker process exit status instead of ENXIO and style
the NOTREACHED comment.
Reviewed by: lulf
X-MFC after: r207671
proceed while g_unload_class() blocks the event thread. Fix this by not
running g_unload_class() as a GEOM event and dropping the topology lock
when withering needs to proceed.
PR: kern/139847
Silence on: freebsd-geom
do not constitute user-visible or active partitions and as such should
not prevent undoing pending operations.
While here, initialize the last usable sector for the placeholder geom
based on the null scheme, created to allow undoing the destruction of
a scheme. This gives consistent output with "gpart show".
Based on a patch from: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Previsouly this condition was reported with EIO by bio_offset > mediasize
check.
Perhaps that check should be extended to bio_offset+bio_length > mediasize.
MFC after: 1 week
in a device independent manner. Also include an example anticipatory
scheduler, gsched_rr, which gives very nice performance improvements
in presence of competing random access patterns.
This is joint work with Fabio Checconi, developed last year
and presented at BSDCan 2009. You can find details in the
README file or at
http://info.iet.unipi.it/~luigi/geom_sched/
In other words, deny multiple read-only mounts of the same device.
Shared read-only mounts should theoretically be possible, but,
unfortunately, can not be implemented correctly using current
buffer cache code/interface and results in an eventual system crash.
Also, using nullfs seems to be a more efficient way to achieve the same
goal.
This gets us back to where we were before GEOM and where other BSDs are.
Submitted by: pjd (idea for checking for shared mounting)
Discussed with: phk, pjd
Silence from: fs@, geom@
MFC after: 2 weeks
In r205860 I missed the fact that there is code that strongly assumes
that devvp bo_bsize is equal to underlying provider's sectorsize.
In those places it is hard to obtain the sectorsize in an alternative
way if devvp bo_bsize is set to something else.
So, I am reverting bo_bsize assigment in g_vfs_open.
Instead, in getblk I use DEV_BSIZE block size for b_offset calculation
if vp is a disk vp as reported by vn_isdisk. This should coinside with
vp being a devvp.
Reported by: Mykola Dzham <i@levsha.me>
Tested by: Mykola Dzham <i@levsha.me>
Pointyhat to: avg
MFC after: 2 weeks
X-ToDo: convert bread(devvp) in all fs to use bo_bsize-d blocks
Because of how breadn -> bufstrategy -> g_vfs_strategy are currently
implemented, bread on devvp always expects DEV_BSIZE block size.
Thus, devvp bo_bsize must always be DEV_BSIZE irrespective of media
properties or filesystem implementation details.
Reviewed by: mckusick
MFC after: 2 weeks
to support various storage boxes which really aren't active-active.
We only write the label on the *first* provider. For all other providers
we just "add" the disk. This also allows for an "add" verb.
A usage implication is that you should specificy the currently active
storage path as the first provider.
Note that this does not add RDAC-like functionality, but better allows for
autovolumefailover configurations (additional checkins elsewhere will support
this).
Sponsored by: Panasas
MFC after: 1 month
provider names.
- Characters in range 0x01-0x1f except '\t', '\n', and '\r' are replaced
with '?'. Those characters are disallowed in XML.
- '&', '<', '>', '\'', '"' and characters in range 0x7f-0xff are
replaced with XML numeric character reference.
If the kern.geom.confxml sysctl provides invalid XML, libgeom
geom_xml2tree() fails and utilities using it do not work. Unsafe
characters are common in msdosfs and cd9660 labels.
PR: kern/104389
Submitted by: Doug Steinwand (original version)
Reviewed by: pjd
Discussed on: freebsd-geom
MFC after: 3 weeks
