The device index, partition index and reference counter are all positive
numbers. However, since our internal partition number may be negative
to indicate GPT table, the compare expression need to take care when comparing
pdinfo_t and partition data.
I accidentally introduced different whitespace style in r323878. I'm not
used to using tabs for indentation in Python scripts.
Whitespace only; no functional change.
Sponsored by: Dell EMC Isilon
Prevent cam_iosched_iops_tick() from discarding 'unspent' ios unless
it's a new accounting interval.
Previously ios that weren't used between ticks were lost, as a result
the iops limiter could enforce a limit below the configured maximum.
Obtained from: ElectroBSD
Submitted by: Fabian Keil
PR: 221974
Previously the iops limiter would always allow at least
quanta ios per second as cam_iosched_iops_tick() never set
ios->l_value1 below 1.
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
PR: 221974
In particular, support chaining an AES cipher with an HMAC for a request
including AAD. This permits submitting requests from userland to encrypt
objects like IPSec packets using these algorithms.
In the non-GCM case, the authentication crypto descriptor covers both the
AAD and the ciphertext. The GCM case remains unchanged. This matches
the requests created internally in IPSec. For the non-GCM case, the
COP_F_CIPHER_FIRST is also supported since the ordering matters.
Note that while this can be used to simulate IPSec requests from userland,
this ioctl cannot currently be used to perform TLS requests using AES-CBC
and MAC-before-encrypt.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11759
This requests that the cipher be performed before rather than after
the HMAC when both are specified for a single operation.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11757
Software crypto implementations don't care how the buffer is laid out,
but hardware implementations may assume that the AAD is always before
the plain/cipher text and that the hash/tag is immediately after the end
of the plain/cipher text.
In particular, this arrangement matches the layout of both IPSec packets
and TLS frames. Linux's crypto framework also assumes this layout for
AEAD requests.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11758
It doesn't appear to be safe to use gtask->gt_name.
Reported by: Mark Johnston, Jenkins
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12448
/usr/local/etc gets created and populated by packages. However, if no
packages are installed when setup_nanobsd is run, this symlink won't
get created, causing problems if packages are installed later (say on
first boot). Therefore, always create the symlink and etc/local. It
does no harm and may help.
Inspired by crochet issue #183 (consuingly says NanoBSD, means crochet)
Sponsored by: Netflix
Move handling of these three pathconf() variables out of vop_stdpathconf()
and into devfs_pathconf() as TTY devices can only be devfs files. In
addition, only return settings for these three variables for devfs devices
whose device switch has the D_TTY flag set.
Discussed with: bde, kib
Sponsored by: Chelsio Communications
Check the return code of intr_setaffinity() and log any errors
it returns. When a qid is not located, log an error before returning
failure. Also, use __func__ rather than hardcoding the function name
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12436
Previously, this test was entirely a no-op as no vector in the NIST-KAT file
has a precisely 20-byte key.
Additionally, not every vector in the file is SHA1. The length field
determines the hash under test, and is now decoded correctly.
Finally, due to a limitation I didn't feel like fixing in cryptodev.py, MACs
are truncated to 16 bytes in this test.
With this change and the uncommitted D12437 (to allow key sizes other than
those used in IPSec), the SHA tests in cryptotest.py actually test something
and e.g. at least cryptosoft passes the test.
Sponsored by: Dell EMC Isilon
Previously had the same short and long description as taskqueues.
This could cause problems with memguard(9) and vmstat -m which use
the short description as a unique identifier.
Reviewed by: sbruno
Approved by: sbruno (mentor)
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12438
- Use HWRM_FUNC_VF_CFG instead of HWRM_FUNC_CFG on VFs
- Fix NPAR/VF detection
- Clean up flag definitions
- Don't allow WoL on VFs
Although the bnxt driver doesn't support SR-IOV so can create VFs yet,
the PF could be running Linux or ESCi with a VF passed through to a
FreeBSD guest. This fixes the driver for that use case.
Submitted by: Siva Kallam <siva.kallam@@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12410
For some reason, we only skipped AES-XTS tests if a driver was not in the
aesmodules list. Skip other AES modes as well to prevent spurious failures
in non-AES drivers.
Sponsored by: Dell EMC Isilon
accepts PQ_NONE as the specified queue and returns a Boolean indicating
whether the page's wire count transitioned to zero. Use these features
in dev/drm2.
Reviewed by: kib, markj
MFC after: 1 week
from blank lines being numbered or unnumbered, depending on whether cat
was invoked with -ne or -be.
At present, when cat is invoked with -be, there is an aditional
difference that the '$' on blank lines is placed on the far left of the
output.
Discussed in bug 210607.
While here, revert the workaround from r304035 which skipped the unit test for
this issue previously.
PR: 210607
Submitted by: myself
Reviewed by: bdrewery
Obtained from: NetBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12432
This ensures that the loader will not load the module if it's also built in to
the kernel.
PR: 220860
Submitted by: Eugene Grosbein <eugen@freebsd.org>
Reported by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
initialize nvp on every loop iteration and the code under 'fail'(!) label
detects success by checking of nvp != NULL.
Submitted by: pjd@
MFC after: 1 month
Sponsored by: Wheel Systems
This function was only set in legacy.sh and only at the very end after
the disk image had been successfully created. The only difference will be
that the message 'Error encountered. Please check...' will not appear if
nanobsd.sh exits with an error after the disk image has been created.
to 'fail' on error it was treated as success, because nvp!=NULL. Fix this
by not handling success under 'fail' label and by using separate variable
for parent nvpair.
If we succeeded to allocate nvlist, but failed to allocated nvpair we
would leak nvls[ii] on return. Destroy it when we cannot allocate nvpair,
before we goto fail.
Submitted by: pjd@ and oshogbo@ (minor changes)
Found by: scan-build
MFC after: 1 month
Sponsored by: Wheel Systems
initially NULL, which is not possible. Change the loop to
'do {} while (array != NULL)' to satisfy scan-build and assert that
array really cannot be NULL just in case.
Submitted by: pjd@
Found by: scan-build
MFC after: 1 month
Sponsored by: Wheel Systems
Make scan-build happy by casting to 'void *' instead of 'void **'.
Submitted by: pjd@
MFC after: 1 month
Found by: scan-build and cppcheck
Sponsored by: Wheel Systems
Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of packets flow.
When we create new named object, there are not yet any rules, that
references it, thus holding IPFW_UH_WLOCK is enough to safely update
needed structures. When we destroy an object, we do this only when its
reference counter becomes zero. And it is safe to not acquire IPFW_WLOCK,
because noone references it. The another case is when we failed to finish
some action and thus we are doing rollback and destroying an object, in
this case it is still not referenced by rules and no need to acquire
IPFW_WLOCK.
This also fixes panic with INVARIANTS due to recursive IPFW_WLOCK acquiring.
MFC after: 1 week
Sponsored by: Yandex LLC
