* If read -t times out, return status as if interrupted by SIGALRM
(formerly 1).
* If a trapped signal interrupts read, return status 128+sig (formerly 1).
* If [EINTR] occurs but there is no trap, retry the read (for example
because of a SIGWINCH in interactive mode).
* If a read error occurs, write an error message and return status 2.
As before, a variable assignment error returns 2 and discards the remaining
data read.
Use non-blocking I/O to write as much as the pipe will accept (often 64K,
but it can be as little as 4K), avoiding the need for the ugly PIPESIZE
constant. If PIPESIZE was set too high, a deadlock would occur.
It now passes WARNS=7 with clang on i386.
GCC 4.2.1 does not understand setjmp() properly so will always trigger
-Wuninitialized. I will not add the volatile keywords to suppress this.
In some other shells, things like $((a);(b)) are command substitutions.
Also, there are shells that have an extension ((ARITH)) that evaluates an
arithmetic expression and returns status 1 if the result is zero, 0
otherwise. This extension may lead to ambiguity with two subshells starting
in sequence.
If syntactically invalid job identifiers are to be taken as jobs that exited
with status 127, this should not apply to options, so that we can add
options later if need be.
This ensures 'return' in a trap returns the correct status to the caller.
If evalskip is not set or if it is overridden by a previous evalskip, keep
the old behaviour of restoring the exit status from before the trap.
If a stack mark is set while the current stack block is empty, the stack
block may move later on (because of realloc()) and the stack mark needs to
be updated. This updating does not happen after popstackmark() has been
called; therefore, call setstackmark() again if the stack mark is still
being used.
For some reason, this only affects a few users. I cannot reproduce it. The
situation seems quite rare as well because an empty stack block would
usually be freed (by popstackmark()) before execution reaches a
setstackmark() call.
PR: 175922
Tested by: KT Sin
Now it outputs fixed files, which use constants provided by the C standard
library to determine appropriate values for the target machine.
Before, mksyntax inspected the host machine which resulted in subtle
breakage if e.g. char is signed on the host and unsigned on the target such
as when cross-compiling on x86 for ARM.
Tested using -funsigned-char on amd64. Compiling build-tools without it and
sh itself with it causes various tests to fail without this change but not
with this change. With consistent -funsigned-char, tests pass with or
without this change.
The mksyntax program could be removed and syntax.c and syntax.h committed to
the repository.
Submitted by: Christoph Mallon
MFC after: 2 weeks
ISO/IEC 9899:1999 (E) 5.2.1p3 guarantees that the values of the characters
0123456789 are contiguous.
The generated syntax.c and syntax.h remain the same.
Submitted by: Christoph Mallon
Expand here documents at the same point other redirections are expanded but
use a non-fork subshell environment (like simple command substitutions) for
compatibility. Substitition errors result in an empty here document like
before.
As a result, a fork is avoided for short (<4K) expanded here documents.
Unexpanded here documents (with quoted end marker after <<) are not affected
by this change. They already only forked when >4K.
Side effects:
* Order of expansion is slightly different.
* Slow expansions are not executed in parallel with the redirected command.
* A non-fork subshell environment is subtly different from a forked process.
If a loop contained certain commands (such as redirected compound commands),
the temporary memory for the redirection was not freed between iterations of
the loop but only after the loop.
Put a stackmark in evaltree(), freeing memory whenever a node has been
evaluated. Some other stackmarks are then redundant; remove them.
Example:
while :; do { :; } </dev/null; done
Instead of rechecking relative paths for all hashed utilities after a cd,
track if any utility in cmdtable depends on a relative path in PATH.
If there is such a utility, cd clears the entire table.
As a result, the '*' in hash no longer happens.
Accessing sys_siglist directly requires rtld to copy it from libc to the sh
executable's BSS. Also, strsignal() will put in the signal number for
unknown signals (FreeBSD-specific) so we need not do that ourselves.
Unfortunately, there is no function for sys_signame.
If there is a write error on stdout, a message will be printed (to stderr)
and the exit status will be changed to 2 if it would have been 0 or 1.
PR: bin/158206
* The last character is not displayed.
* If the alias ends with itself (as a word), an infinite memory-eating loop
occurs.
If an alias is defined initially, a space is appended to avoid recursion but
this did not happen when an alias was later modified.
PR: bin/173418
Submitted by: Daniel F.
MFC after: 1 week
Although sufficient memory is available for a longer string in cmdname,
this is undefined behaviour anyway.
Side effect: for alignment reasons, an additional byte of memory is
allocated per hashed command.
This reduces code duplication and code size.
/usr/bin/printf is not affected.
Side effect: different error messages when certain builtins are passed
invalid options.
When waiting for child processes using "wait" or if "set -T" is in effect, a
signal interrupts the wait. Make sure there is no window where the signal
handler may be invoked (setting a flag) just before going to sleep.
There is a similar race condition in the shell language, but scripts can
avoid it by exiting from the trap handler or enforcing synchronization using
a fifo.
If SIGCHLD is not trapped, a signal handler must be installed for it. Only
install this handler for the duration of the wait to avoid triggering
unexpected [EINTR] errors elsewhere.
Note that for some reason only SIGINT and SIGQUIT interrupt a "wait"
command. This remains the case.
Examples:
export x=~
now expands the tilde
local y=$1
is now safe, even if $1 contains IFS characters or metacharacters.
For a word to "look like an assignment", it must start with a name followed
by an equals sign, none of which may be quoted.
The special treatment applies when the first word (potentially after
"command") is "export", "readonly" or "local". There may be quoting
characters but no expansions. If "local" is overridden with a function there
is no special treatment ("export" and "readonly" cannot be overridden with a
function).
If things like
local arr=(1 2 3)
are ever allowed in the future, they cannot call a "local" function. This
would either be a run-time error or it would call the builtin.
This matches Austin Group bug #351, planned for the next issue of POSIX.1.
PR: bin/166771
On recent versions of NetBSD's libedit, el_gets
now sets el_len to -1 on error so we can
distinguish between a NULL string and an error.
This fixes sh from exiting with newer versions
of libedit now allowing EINTR to return.
Obtained from: NetBSD
Reviewed by: jilles
MFC after: 3 weeks
