This adds support for version 10, revision 01, but it should also work
without changes for the 0901 model, at least until we get drivers for the
two different wifi chips involved.
Many users contributed to and tested the various patchsets floating around
for the past year that have eventually evolved into this checkin, most notably
Richard Neese who provided the bulk of the kernel config file.
Approved by: cognet (mentor)
comconsole setup. Previously the hint would be set when if you set a
custom port, but it would not be updated if you later set a custom speed.
Also, leave the hw.uart.console hint mutable so it can be overridden or
unset by the user if needed.
Reviewed by: kib (earlier version)
MFC after: 1 week
gcc handles -symbolic by passing -Bsymbolic through to ld. clang ignores
-symbolic and thus invokes ld without -Bsymbolic which leads to some symbols
not being properly linked in loader.efi. Fix this by using -Wl,-Bsymbolic which
passes -Bsymbolic to ld in both the gcc and clang cases.
Approved by: rpaulo
arch_zfs_probe method is supposed to only probe for ZFS vdevs, but it can
not expect that ZFS data is in a ready state yet.
So, move some code from sparc64_zfs_probe to main to meet the constraints.
Reported by: Chris Ross <cross+freebsd@distal.com>
Tested by: Chris Ross <cross+freebsd@distal.com>
MFC after: 4 days
r238966
Bump up the heap size to 1MB. With a few kernel modules, libstand
zalloc and userboot seem to want to use ~600KB of heap space, which
results in a segfault when malloc fails in bhyveload.
r241180
Clarify comment about default number of FICL dictionary cells.
r241153
Allow the number of FICL dictionary cells to be overridden.
Loading a 7.3 ISO with userboot/amd64 takes up 10035 cells,
overflowing the long-standing default of 10000.
Bump userboot's value up to 15000 cells.
Reviewed by: dteske (r238966,241180)
Obtained from: NetApp
Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.
This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).
loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).
Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.
Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.
PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
Committed with changes to support the following from loader.conf(5):
+ console="vidconsole comconsole" (not just console="comconsole")
+ boot_serial="anything" (not just boot_serial="YES")
+ boot_multicons="anything" (unsupported in originally-submitted patch)
PR: conf/121064
Submitted by: koitsu
Reviewed by: gcooper, adrian (co-mentor)
Approved by: adrian (co-mentor)
- Add "fdt addr" subcommand that lets you specify preloaded blob address
- Do not pre-initialize blob for "fdt addr"
- Do not try to load dtb every time fdt subcommand is issued,
do it only once
- Change the way DTB is passed to kernel. With introduction of "fdt addr"
actual blob address can be not virtual but physical or reside in
area higher then 64Mb. ubldr should create copy of it in kernel area
and pass pointer to this newly allocated buffer which is guaranteed to work
in kernel after switching on MMU.
- Convert memreserv FDT info to "memreserv" property of root node
FDT uses /memreserve/ data to notify OS about reserved memory areas.
Technically it's not real property, it's just data blob, sequence
of <start, size> pairs where both start and size are 64-bit integers.
It doesn't fit nicely with OF API we use in kernel, so in order to unify
thing ubldr converts this data to "memreserve" property using the same
format for addresses and sizes as /memory node.
Make the following interface changes to my beastie boot menu:
+ Move boot options to a submenu
+ Add a new "Boot Single" menu item
+ Make "Boot" item and new "Boot Single" item reverse when boot_single is set
+ Add new "Load Defaults" item (in new "Boot Options" submenu) for overridding
loader.conf(5) provided values with system defaults.
Reviewed by: adrian (co-mentor)
Approved by: adrian (co-mentor)
Rasperry Pi firmware has a set of hardcoded pathes it uses to fill
FDT with system-specific information like display resolution, memory
size, UART and SDHCI clocks, ethernet MAC address. Handle two of them:
- Add placeholder for ethernet MAC address
- Move display node out of "axi" node
+ Cleanup syntax, slim-down code, and make things more readable
+ Introduce new +c! operator and ilk to reduce heap usage/allocations
+ Add safemode_enabled? safemode_enable and safemode_disable functions
+ Add singleuser_enabled? singleuser_enable singleuser_disable functions
+ Add verbose_enabled? verbose_enable and verbose_disable functions
+ Centralize strings (also to reduce heap usage)
Reviewed by: peterj, adrian (co-mentor)
Approved by: adrian (co-mentor)
The sole purpose of this change is to make sure that sizeof produces
"canonical" sizes for these structures. This is to avoid triggering
bugs in the BIOSes that properly handle only the canonical values of
input length provided to INT 13h AH=48h.
The canonical sizes are: 30 for v2, 66 for v3, etc.
Buggy BIOS code probably looks like:
if (input_length > 30) { /* > v2 */
assume that input length is 66 /* assume v3 or later */
}
This should fix boot problems at least on Supermicro X8DT6 and possibly
on P410i Smart Array Controller (as found in e.g. HP DL360 G7).
Reported by: gnn, np, rstone
Debugged by: rstone
Discussed with: ae, np, rstone
MFC after: 4 days
i386 comconsole: don't loop forever if hardware doesn't respond
- clear capability flags when hw timeouts
- retire comc_started status variable and directly use c_flags to see
if comconsole is selected for use
sio.S. This is not particularly needed for head right now, but it is
intended to merge to stable/9, to fix boot2 build with clang there.
Reviewed by: avg
MFC after: 3 days
default compiler. This has two parts:
- Make sys/boot/pc98/boot2 always build with gcc for now, until we can
figure out a way to shrink it enough when building with clang.
- Since sys/boot/p98/cdboot uses .code16 directives, which are not yet
supported by clang's integrated assembler, use -no-integrated-as,
similar to sys/boot/i386/cdboot.
Reviewed by: nyan
MFC after: 1 week
submenus. See menusets.4th(8) for additional details including examples.
Discussed on arch and recommended for inclusion at the devsummit.
This change does not alter the appearance or user experience, only enhances
possibilities.
Reviewed by: adrian (co-mentor)
Approved by: adrian (co-mentor)
command execution. In case of such unhandled exception, vmReset() inside
ficlExecC() flushes the VM state. Attempt to return back to Forth after
that cause garbage dereference with unexpected results. To avoid that
situation call vmThrow() directly instead of expecting Forth to do it.
.. so that consistent compilation algorithms are used for both
architectures as in practice the binaries are expected to be
interchangeable (for time being).
Previously i386 used default setting which were equivalent to
-march=i486 -mtune=generic.
The only difference is using smaller but slower "leave" instructions.
Discussed with: jhb, dim
MFC after: 29 days
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
"boot verbose", "single user mode", "ACPI" and more are now stateful boolean
menuitems rather than direct action-items.
A short-coming in this new menu system is that when a user sets a non-default
value in loader.conf(5), this non-default state is not reflected in the menu
-- leading to confusion as to whether the option was taking effect or not.
This patch adds dynamic menuitem constructors _and_ the necessary Forth
callbacks to initialize these stateful menuitems -- causing the aforementioned
menuitems to adhere to loader.conf(5) settings.
PR: bin/172529
Approved by: adrian (co-mentor)
MFC after: 21 days
executed to better differentiate between loader-specific errors and kernel-
specific errors (if ever any of either).
This type of functionality hasn't been required before the introduction of the
advanced menu system (r222417). Adding this functionality will help different-
iate errors at the loader-level such as a BTX halt caused by heap exhaustion
and errors that may be involved with executing the kernel (wrong architecture
for example). A user can learn that messages before "Booting..." are related to
the loader(8) environment and it's Forth-ilk, while those after are not
related to loader(8) -- the point that loader(8) has ``left the building''.
This patch also includes a man-page update to color.4th(8) as the color logic
moves to a lower-level (from being included by beastie.4th to being included
by loader.4th).
After noticing a delay between execution of the overloaded "boot" FICL word and
the display of text on-screen, gcooper confirmed that the introduction of a
builtin memory test (disabled by adding hw.memtest.tests="0" to loader.conf(5))
was the cause of the delay.
This patch adds an echo to produce "Booting..." when the overloaded "boot" word
is executed (this includes from the interactive command-prompt on all arches,
from the menu system on arches that run the beastie menu, and even those arches
that run the menu but disable it by setting beastie_disable="YES" in
loader.conf(5)). When loader_color="YES" in loader.conf(5), the same message is
produced but in white text on a blue background (only the letters produced have
this background -- opposed to perhaps the entire line).
- clear capability flags when hw timeouts
- retire comc_started status variable and directly use c_flags to see
if comconsole is selected for use
Reviewed by: jhb
Tested by: Uffe Jakobsen <uffe@uffe.org>,
Olivier Cochard-Labbe <olivier@cochard.me>
MFC after: 26 days
- clarify meaning of console flags
- perform i/o via a console only if both of the following conditions are met:
o console is active (selected by user or config)
o console flags that it can perform the operation
- warn if a chosen console can not work (the warning may go nowhere without
working and active console, though)
Reviewed by: jhb
Tested by: Uffe Jakobsen <uffe@uffe.org>,
Olivier Cochard-Labbe' <olivier@cochard.me>
MFC after: 26 days
The first discovered pool, whether it covers the whole boot disk or not,
is going to be first in zfs_pools list. So there is no need at all
for spapp parameter.
This commit also fixes a bug where NULL would be assigned to NULL
pointer when probe_drive was called with the spapp parameter of NULL.
MFC after: 21 days
- only filesystem datasets are supported
- children names are printed to stdout
To do: allow to iterate over the list and fetch names programatically
MFC after: 17 days
disk_open(). Very often this is called several times for one file.
This leads to reading partition table metadata for each call. To
reduce the number of disk I/O we have a simple block cache, but it
is very dumb and more than half of I/O operations related to reading
metadata, misses this cache.
Introduce new cache layer to resolve this problem. It is independent
and doesn't need initialization like bcache, and will work by default
for all loaders which use the new DISK API. A successful disk_open()
call to each new disk or partition produces new entry in the cache.
Even more, when disk was already open, now opening of any nested
partitions does not require reading top level partition table.
So, if without this cache, partition table metadata was read around
20-50 times during boot, now it reads only once. This affects the booting
from GPT and MBR from the UFS.
number is not exactly specified. When the disk has MBR, also try to read
BSD label after ptable_getpart() call. When the disk has GPT, also set
d_partition to 255. Mostly, this is how it worked before.
'path' argument of ofw_parsedev() if devspec refers raw device with no path.
For example, `ls /pci@1f,0/ide@d/disk@0,0:a/` works fine, while
`ls /pci@1f,0/ide@d/disk@0,0:a` panicked before this change.
Use of __builtin_constant_p in a function that is only called via
a pointer is a good example of how out-of-date it was.
Suggested by: bde
MFC after: 1 week
MSI are implemented via software interrupt. PCIe cards will write
into software interrupt register which will cause inbound shared
interrupt which will be interpreted as a MSI.
Obtained from: Marvell, Semihalf
- Add functions to calculate clocks instead using hardcoded values
- Update reset and timers functions
- Update number of interrupts
- Change name of platform from db88f78100 to db78460
- Correct DRAM size and PCI IRQ routing in dts file.
Obtained from: Semihalf