- bus_space'ify
- generate fake ethernet address using read_random() instead of reading
from timer i/o ports
Other minor fixes:
- remove "hack" in connect_to_master()
- use M_ZERO
- remove unused variable in sbni_ioctl()
- properly release irq in sbni_attach_isa() on attach errors
and the AT24C08 small serial flash parts. We still report these as
the same part (since we group things already), but now we recognize
the small serial versions as well.
firmware revision as well (not sure which firmware versions are needed
for this, but the 6.x and 8.x 'software' versions that I have seem to
support it).
Add dBm comm quality RID. This is like the normal comm quality rid,
except the signal and noise numbers are normalized to dBm. Some
revisions of the prism firmware, however, don't support this RID, and
some that do support it return 0 for quality and/or noise. Your
milage may vary.
Also take this chance to cleanup the code in fxp_intr_body.
Add a missing block of code to disable interrupts when
reinitializing the interface while doing polling (the RELENG_4
version was correct).
MFC after: 3 days
cards. Since the firmware is hard coded into the kernel, I've made it
a kernel option (WI_SYMBOL_FIRMWARE).
Note: This only downloads into the RAM of these cards. It doesn't
download into FLASH, and is somewhat limited. There needs to be a
better way to deal, but this works for now. My Symbol LA4132 CF card
works now.
Obtained from: NetBSD
sizes. Previously, the end result was at the mercy of the card's default
setting. This change will reduce the number of buffer underruns for
some users.
PR: kern/37929
Submitted by: Thomas Nystrom <thn@saeab.se>
MFC after: 7 days
controller. Some testing has already been done, but its still greenish.
RAID's has to be setup via the BIOS on the SuperTrak, but all RAID
types are supported by the driver. The SuperTrak rebuilds failed arrays
on the fly and supports spare disks etc etc...
Add "device pst" to your config file to use.
As usual bugsreports, suggestions etc are welcome...
Development sponsored by: Advanis
Hardware donated by: Promise Inc.
debugging levels to off by default. Now that debug levels can be
tweaked by sysctl we don't need to go through hoops to get the
different usb parts to produce debug data.
frees it again. The idea was to perform M_WAITOK allocations in a
process context to reduce the risk of later interrupt-context
M_NOWAIT allocations failing, but in fact this code can be called
from contexts where it is not desirable to sleep (e.g. if_start
routines), so it causes lots of witness "could sleep" warnings.
is that some cards built around fm801 chip have the same device ID, only
have radio tuner onboard, but no sound capabilities. Therefore, with such
card inserted and `device pcm' in kernel the user has a big problem, as
the fm801 driver effectively hangs the machine when trying to initialise
nonexistent ac97 codecs (it does 500 retries with 1 second interval!).
It would be better if MediaForte's engeneers were smart enough to put
different device ID into such cards, but it isn't an option.
MFC after: 2 weeks
problems with the firmware and will result in a) poor performance and
b) the inability to associate certain types of cards (most notibly
cisco).
Idea obtained from OpenBSD, but I implemented it by clearing the
IFF_PROMISC flag rather than the refusing to honor it downstream.
1.131 is slightly broken, and I would commit the fix to that here, but it
has been reported that any deviation from the original code is causing
problems with some 82557 chips, causing them to lock hard.
Until those issues have been figured out, going back to the original
code is the best plan.
Frustrated: Silby
