Commit Graph

447 Commits

Author SHA1 Message Date
Rodney W. Grimes
6a0e6f4266 Terminate all probe/diagnostic/error messages correctly with a \n.
Report floppy/tape units on seperate lines as fdX:/ftX: to correct lots of
ways the current scheme failed to end the output with \n.

Add controller and/or drive designator to the fron of several messages
that come from this drive.  [It's not fun to track down driver messages
using grep over the source tree.]
Reviewed by:	joerg
1995-03-26 19:28:22 +00:00
Bruce Evans
f0d47944e2 Forward-declare kern_devconf for use in a prototype. Some drivers
include <pci/pcivar.h> without including <sys/devconf.h> and other
drivers include <pci/pcivar.h> before including <sys/devconf.h> if
certain identifiers are defined.

The devconf headers have convoluted interdependencies.  <sys/devconf.h>
includes <machine/devconf.h> which includes <pci/pcivar.h>.  Most
drivers include <sys/devconf.h> so even isa drivers depend on
<pci/pcivar.h>.  For similar reasons, most drivers depend on another
pci header, on an isa header and on two scsi headers.
1995-03-25 21:10:38 +00:00
Bruce Evans
eb2cb5e165 Fix the path to scdreg.h.
Fix implicit declarations.
1995-03-25 18:14:37 +00:00
Jordan K. Hubbard
0fb7352341 Bring in the new non-GPL'd driver from Mikael Hybsch. This version is
NOT derived from the Linux code and is thus not GPL'd.  It is the author's
express wish that the GPL copyrighted version be removed and this BSD copyright
version take its place.  Considering our own stance on this, I'm certainly
not going to argue!  [Note to NetBSD folks:  You're free to grab it now :-)]
Submitted by:	Mikael Hybsch <micke@dynas.se>
1995-03-24 18:33:02 +00:00
Justin T. Gibbs
70b211b3a0 aha1742.c:
#include <i386/isa/isa.h>
	return IO_EISASIZE instead of hard coded 0x1000.

if_ep.c:
	Remove commented out disabling of interrupts that gave a
	"comment withing a comment" warning.
1995-03-23 07:31:08 +00:00
David Greenman
0602287958 Patches from Serge Babkin to fix interrupt handling bugs.
Submitted by:	Serge Babkin
1995-03-23 06:53:39 +00:00
David Greenman
a54907a1a7 Restore my changes to initialize the kdc_shutdown routine pointer. Stefan
clobbered it in his previous commit and not having it causes the machine
to panic during reboot (as well as not doing the important shutdown callout).
1995-03-23 06:14:44 +00:00
Stefan Eßer
8673e05a9a Completely new PCI code:
1) Supports PCI to PCI bridge devices (and tries to initialise them,
   even if the BIOS is brain dead).
2) Supports shared PCI interrupts. Interrupt handlers now MUST return
   '0' if they found nothing to do, '1' otherwise.

New features tested with i486 systems based on the Intel Saturn and
a DEC 4channel Ethernet card only, but expected to work on most systems.

The option PCI_REMAP has been removed !

Submitted by:	Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Stefan Eßer
067968d4d7 Cosmetic changes.
Submitted by:	Wolfgang Stnglmeier <wolf@kintaro.cologne.de>
1995-03-21 22:41:19 +00:00
David Greenman
edf8a81561 Removed redundant newlines that were in some panic strings. 1995-03-19 14:29:26 +00:00
Justin T. Gibbs
b8d72a5ae8 Make the aic7xxx assembler take quoted strings as a single token.
Make $Id the version variable which required the quoted string "feature".
1995-03-17 23:54:17 +00:00
David Greenman
cb09d35cb0 Added a new field to the pci_device struct called pd_shutdown to specify
a device specific shutdown routine for devconf. Assign the value of this
to the kern_devconf struct. Implement a device shutdown routine for if_de
that disables the device. This will stop the device from corrupting memory
after a reboot.
1995-03-17 04:27:21 +00:00
Bruce Evans
b5e8ce9f12 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'.  Fix all the bugs found.  There were no serious
ones.
1995-03-16 18:17:34 +00:00
Stefan Eßer
11098d3bad Prepare for shared interrupts (required by the new PCI code that adds
support for PCI PCI bridges, e.g. found on 4ch. Ethernet cards).

Submitted by:   Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-16 17:41:20 +00:00
Joerg Wunsch
82f5379bc5 Finally get rid of this bothering ``biodone: buffer already done''
warning.  The buffer needs only to be `biodone()' again if the format
operation timed out; otherwise fdstate() did already do the job.
1995-03-12 22:40:56 +00:00
Poul-Henning Kamp
5511b2e4f3 A substantial change to the way this works. Not the "TEST_LABELING" is
a option you can turn on and of on the fly, as is debugging.
1995-03-11 09:32:45 +00:00
Justin T. Gibbs
06f0e1ceb8 Be careful to maintain the bits in SBLKCTL that are reserved. 1995-03-07 09:00:44 +00:00
Bruce Evans
17fb427c08 Fake the geometry to be 32 sectors * 64 heads * (vn->sc_size / 2048)
cylinders instead of vn->sc_size * 1 * 1.

Remove unnecessary tests of the unit numbern vnioctl().
1995-03-04 11:08:26 +00:00
Andrey A. Chernov
537907d280 Fix flag bugs with RUKEYMAP 1995-03-03 23:12:20 +00:00
Søren Schmidt
dc463a367e Minor update to syscons.
Let "grey delete" be a function key (default is 0x7f)
Fix the xor cursor again..
Made the backspace key generate del as default
Made CTRL-space generate nul as default.
1995-03-03 08:37:52 +00:00
Stefan Eßer
79a6470e10 Speed up PCI attach code by ommiting test if its result is ignored anyway. 1995-03-02 21:51:53 +00:00
Poul-Henning Kamp
ac9dbeaf66 Missed a reference to numvnd.
Thanks Ollivier.
1995-03-02 01:04:38 +00:00
Poul-Henning Kamp
ee32cbed3b Less bogus allocation of softc to avoid races.
Thanks for the hint David!
1995-03-01 05:05:21 +00:00
Andrey A. Chernov
5d8619d1f2 Workaround IXOFF bug when output queue is full && RTS control is on 1995-02-28 23:21:33 +00:00
Paul Traina
8c5c37cd75 Incorporate bde's code-review comments.
(a) bring back ttselect, now that we have xxxdevtotty() it isn't dangerous.
(b) remove all of the wrappers that have been replaced by ttselect
(c) fix formatting in syscons.c and definition in syscons.h
(d) add cxdevtotty

NOT DONE:
(e) make pcvt work... it was already broken...when someone fixes pcvt to
	link properly, just rename get_pccons to xxxdevtotty and we're done
1995-02-28 00:21:11 +00:00
Ugen J.S. Antsilevich
0739a0dc6e same 1995-02-27 19:47:53 +00:00
Stefan Eßer
04dbb40865 First try to add support for PCI-PCI bridge chips (written for the
DEC 21050 chip in particular, don't have specs of other such chips).

This should add support for Multiple-Ethernet PCI cards (e.g. Znyx 314).

Reviewed by:	se
Submitted by:	<wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-27 17:17:14 +00:00
David Greenman
caffd55fe6 Doubled 'maxwait' to 200 (240us).
Submitted by:	brian@mediacity.com (Brian Litzinger)
1995-02-26 20:03:53 +00:00
Bruce Evans
550f8550ec Replace all remaining instances of i386/include' by machine' and fix
nearby #include inconsistencies.
1995-02-26 05:14:53 +00:00
Bruce Evans
eecd3071a6 Don't confuse the frequency with the wavelength in DELAY() args. 960 cps
is close to 1000000 / 960 usec so the confusion probably didn't matter.

Test for COMCONSOLE before testing for RB_SERIAL so that the RB_SERIAL
test can be optimized away if COMCONSOLE is 1.

Simplify and Uniformize style of previous commit.
1995-02-26 02:30:18 +00:00
Bruce Evans
671e2cee97 Declare all the args of Fdopen() and fdclose().
Initialize dk_wpms[] less bogusly.

Clean up includes.

Remove some obsolete comments.
1995-02-26 01:37:51 +00:00
Paul Traina
77f77631e7 (a) remove the pointer to each driver's tty structure array from cdevsw
(b) add a function callback vector to tty drivers that will return a pointer
    to a valid tty structure based upon a dev_t
(c) make syscons structures the same size whether or not APM is enabled so
    utilities don't crash if NAPM changes (and make the damn kernel compile!)
(d) rewrite /dev/snp ioctl interface so that it is device driver and i386
    independant
1995-02-25 20:09:44 +00:00
Stefan Eßer
ef2dee21dc Deal with systems, that lack a fully decoded PCI configuration space.
Submitted by:	<wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-25 17:26:22 +00:00
Bruce Evans
a07f28e24e Remove YF comments. 1995-02-25 16:48:28 +00:00
David Greenman
c5b90f7db2 Spell "guaranteed" correctly.
Submitted by:	frank@fwi.uva.nl (Frank van der Linden)
1995-02-25 15:56:00 +00:00
Andrey A. Chernov
838dadc476 Revive input flow control, some ideas from iverson@leonheart.com
Get rid of TS_RTS_IFLOW, all kinds of input flow control handled
by only one flag now: TS_TBLOCK
Add missing put(VSTOP) when IXOFF control is active.
1995-02-24 00:11:01 +00:00
Andrey A. Chernov
32a61937d7 READSUBCHANNEL:
complete implementation of CD_MSF_FORMAT
implement CD_LBA_FORMAT
Issue STOP before reading toc entries
1995-02-23 17:40:16 +00:00
Jean-Marc Zucconi
95344a43ed Put the joystick status in a struct {int x, y, b1, b2;} rather than in a
dummy array of 4 integers. Declare the struct in the header file and update
the man page.
1995-02-22 23:34:58 +00:00
Bruce Evans
268c424b23 Remove the #error that temporarily stopped this from supporting slices and
labels.

Please test the slice/label features:
	cd /dev; sh MAKEDEV svn0
	cd /var/tmp; dd if=/dev/zero of=vnfile bs=8192 count=1024
	vnconfig -c /dev/rvn0 /var/tmp/vnfile
	fdisk /dev/rvn0  # invent a geometry, create one BSD partition
	disklabel -r -w vn0 floppy  # a convenient (bogus) label
	disklabel -e vn0  # edit label to match device
	newfs /dev/rvn0a
	mount /dev/vn0a /mnt
	...
The steps after the fdisk could name the device vn0s1 instead of vn0.
1995-02-22 22:06:20 +00:00
Stefan Eßer
d9dc2f74ef New PCI attach code:
PCI BIOS mappings are retained, except if option PCI_REMAP
is specified in the kernel config file.
There is now a list of attach addresses, and the first
address that seems to make some device registers appear
is chosen.

Reviewed by:	se
Submitted by:	wolf
1995-02-22 14:17:15 +00:00
Søren Schmidt
17ee9d00bc Next syscons update (given up on numbering :)
Removed screensavers from syscons, they are now LKM's. This makes it
possible to do some really "interesting" screensavers...
Fixed bug that sometimes caused garbage to appear when leaving
"scroll-lock" history.
Reformattet indentation, it got too deep for a normal 80 pos screen.
Split up in syscons.c & syscons.h for use with the saver-lkm's.
Temporarily removed -s option from vidcontrol, savers should now
be loaded with modload.
1995-02-22 13:48:07 +00:00
Andrey A. Chernov
e1a0a1cdfb Increase retry count while reading toc, old one
isn't enough for spin up
1995-02-22 02:12:10 +00:00
Justin T. Gibbs
7325b76b7d Add tagged queueing support to the aic7xxx sequencer code. 1995-02-22 01:37:52 +00:00
Andrey A. Chernov
39c88daba9 Implement tray closing and tray locking
Fix first open fails bug
1995-02-22 01:11:36 +00:00
Poul-Henning Kamp
648c711bb4 This is the latest version of the APM stuff from HOSOKAWA, I have looked
briefly over it, and see some serious architectural issues in this stuff.

On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.

Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.

Reviewed by:	phk
Submitted by:	HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
Bruce Evans
59c0a09db6 Temporarily stop this compiling if the option TEST_LABELLING is defined
so that new slice support code can be installed without risk of
corrupting vn devices (if any).
1995-02-16 13:09:39 +00:00
Ugen J.S. Antsilevich
964587caee More changes to support user calls.
It's 22:00  here,utility still to come(hopefully tomorrow
morning..)
1995-02-15 18:41:57 +00:00
Bruce Evans
ae5e131ac8 Avoid duplicating ttselect() so that we don't have to change cyselect()
when ttselect() is improved.  This requires using an array of tty structs
and not using ttymalloc().

Fix an off by 1 error.  Some caclulations seem to be off by a factor
of NCY.  NCY defaults to 16, which gives 256 tty structs occupying
0xd000 bytes.  The minor number encoding only allows 16 ttys.

Update the types of timeout functions to 2.0.
1995-02-15 18:41:41 +00:00
Ugen J.S. Antsilevich
019b4d63ae Fix couple of nasty bugs..
- Overflow now calculated right
- Close works ok,does not looses tty
- Better overflow handling now the snooping stops
   on overflow,but programm notified and can reconnect if
   it want to..Default maximal buffer set to 664 K and this
   is probably too much..:)))
Utility still to come
1995-02-15 16:35:38 +00:00
Stefan Eßer
9ddf96998e ncr.c:
New config option "NCR_IOMAPPED" makes the driver use port I/O.
Put back in 53c815 defines, submitted by Mikael Hybsch <micke@dynas.se>.
These had got lost between cvs rev. 1.14 and now ...

pci.c:

Really write config space register.
Assign ports starting at 0xbc00.

Submitted by:	wolf
Reviewed by:	se
1995-02-14 23:33:38 +00:00