Commit Graph

1877 Commits

Author SHA1 Message Date
Ian Dowse
9145721957 Use a different task queue for host controller and peripheral driver
tasks. Since the host controllers rely on tasks to process transfer
timeouts, if a synchronous transfer from a driver was invoked from
a task and timed out, it would never complete because the single
task thread was stuck performing the synchronous transfer so couldn't
process the timeout.

This affected the axe, udav and ural drivers.

Problem hardware provided by:	guido
2006-10-19 01:15:58 +00:00
Florent Thoumie
f45164d8b1 Add a USB umass(4) quirk for Panasonic KXL-840AN CD-R drive.
PR:		usb/81073
Submitted by:	James E. Flemer <jflemer@alum.rpi.edu>
MFC after:	3 days
2006-10-07 20:08:37 +00:00
Florent Thoumie
bff4edd817 Add a USB quirk for CMOTECH CDMA USB modem.
PR:		usb/97948
Submitted by:	Alexei Volkov <kot@kotzone.ru>
MFC after:	3 days
2006-10-07 19:42:45 +00:00
Florent Thoumie
b804b1868e Add a USB quirk for Motorola A41x/V32x USB phones.
PR:		usb/97512
Submitted by:	Mark Diekhans <markd@kermodei.com>
MFC after:	3 days
2006-10-07 19:27:53 +00:00
Florent Thoumie
bd4029713f Add support for Novatech NV902 wireless NIC in ural(4).
PR:		usb/102852
Submitted by:	Jonathan Fosburgh <jonathan@fosburgh.org>
MFC after:	3 days
2006-10-07 18:18:40 +00:00
Florent Thoumie
774b7afefb Add support for Epson Stylus CX4200 in uscanner(4).
PR:		usb/102851
Submitted by:	Jonathan Fosburgh <jonathan@fosburgh.org>
MFC after:	3 days
2006-10-07 18:09:27 +00:00
Florent Thoumie
cfa3f4d8ab Add support for Psion Gold Port Ethernet USB NIC.
PR:		usb/102296
Submitted by:	Volker <volker@vwsoft.com>
MFC after:	3 days
2006-10-07 18:03:39 +00:00
Florent Thoumie
d25cbeac2c Add support for Netgear FA101 ethernet USB NIC.
PR:		usb/102286
Submitted by:	Volker <volker@vwsoft.com>
MFC after:	3 days
2006-10-07 17:58:50 +00:00
Florent Thoumie
be1bd380c5 Add a quirk for the Belkin FC6550-AVR UPS.
PR:		usb/102260
Submitted by:	David Grochowski <grocho98@students.rowan.edu>
MFC after:	3 days
2006-10-07 17:47:16 +00:00
Florent Thoumie
0c56f2bcd6 Add support for Familiar Linux powered iPaq handhelds to cdce(4).
PR:		usb/103865
Submitted by:	Alexey Roslyakov <internetworking@mail.ru>
MFC after:	3 days
2006-10-07 17:35:37 +00:00
Florent Thoumie
6d28d23bb9 Add quirk for Logitech iFeel MouseMan USB mouse.
PR:		usb/101066
Submitted by:	Heiko Przybyl <zuxez@uni.de>
MFC after:	3 days
2006-10-07 17:16:48 +00:00
Florent Thoumie
da9b42184b - Add support for Epson USB Scanners (3590 [1] and 4990 [2]).
- Add entries in the uscanner.4 man page (along with missing 3500).

PR:		usb/100957 [1], usb/100992 [2]
Submitted by:	Jim Teresco <terescoj@teresco.org> [1],
		Walter C. Pelissero <walter.pelissero@iesy.net> [2]
MFC after:	3 days
2006-10-07 16:00:59 +00:00
Ian Dowse
dff926577b Fix compile in non-debug case. 2006-10-03 08:38:08 +00:00
Ian Dowse
9c63c3f400 When changing the device address and max packet size in usbd_new_device(),
close and re-open the default pipe instead of relying on the host
controller driver to notice the changes. Remove the unreliable code
that attempted to update these fields while the pipe was active.
This fixes a case where the hardware could cache and continue to
use the old address, resulting in a "getting first desc failed"
error.

PR:		usb/103167
2006-10-03 01:13:26 +00:00
Ian Dowse
a55e16f4f7 Don't attempt to insert the transfer in an error case where it has
already been inserted.
2006-10-03 01:04:11 +00:00
Ruslan Ermilov
1997f96b85 Ignore the UKBD_DFLT_KEYMAP option when compiling as a module.
The parallel LINT build sometimes broke if kernel-depend wasn't
fast enough in generating ukbdmap.h.  If someone thinks this
option would still be useful for the module, a proper fix is
to add the code generating ukbdmap.h into modules/ukbd/Makefile
and backing this change out.
2006-10-02 16:02:41 +00:00
Ruslan Ermilov
9fddcc6661 Fix our ioctl(2) implementation when the argument is "int". New
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.

Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.

Reviewed by:	bde (with contributions)
Tested by:	emax, marius
MFC after:	1 week
2006-09-27 19:57:02 +00:00
Olivier Houchard
b098674792 Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls in
an interrupt context.

Obtained from:	NetBSD
MFC after:	1 week
2006-09-22 12:45:42 +00:00
Tom Rhodes
16b392d51d Yank FreeBSD specific code out from under ifdef.
Remove compatibility ifdefs.

Reviewed/Ok'ed by:	imp
2006-09-10 15:20:39 +00:00
Warner Losh
2deae8fa2f More removing compatibility macros.
md5 still the same.

"Dave, stop.  I feel my mind slipping away." -- hal
2006-09-07 00:06:42 +00:00
Warner Losh
730503190d Only include FreeBSD defines. This file is slated to go to the happy
hunting ground in the sky.

Also, remove the #defines OBE.
2006-09-06 23:49:36 +00:00
Warner Losh
56635f6bd3 s/Static/static/g
s/device_ptr_t/device_t/g

No md5 changes in the .o's

# Note to the md5 tracking club: $FreeBSD$ changes md5 after every commit
# so you need to checkout -kk to get $FreeBSD$ instead of the actual value
# of the keyword.
2006-09-06 23:44:25 +00:00
Warner Losh
f455418269 More antideclarification.
md5 still the same after all these years (and after -g was removed).
2006-09-06 23:29:53 +00:00
Warner Losh
da271ed509 Remove the portibility layer goo.
Produces the same .o as before.

md5 by: /sbin/md5
2006-09-06 21:53:28 +00:00
John-Mark Gurney
378f231e7d add a newbus method for obtaining the bus's bus_dma_tag_t... This is
required by arches like sparc64 (not yet implemented) and sun4v where there
are seperate IOMMU's for each PCI bus...  For all other arches, it will
end up returning NULL, which makes it a no-op...

Convert a few drivers (the ones we've been working w/ on sun4v) to the
new convection...  Eventually all drivers will need to replace the parent
tag of NULL, w/ bus_get_dma_tag(dev), though dev is usually different for
each driver, and will require hand inspection...

Reviewed by:	scottl (earlier version)
2006-09-03 00:27:42 +00:00
Warner Losh
5657c870dc Don't put a ; after while (0)
Submitted by:	jmg
2006-08-17 22:42:56 +00:00
Bruce M Simpson
d180698897 Add identifier for the Epson CX3650 all-in-one scanner function.
This enables the scanner function on these devices to be detected
and probed by uscanner(4), but only when ulpt is not loaded.

PR:		usb/92462
Submitted by:	Friedrich Volkmann
MFC after:	30 days
2006-08-06 12:01:42 +00:00
Sam Leffler
4350e12f23 remove unneccessary null ptr check
Coverity ID:	173918
2006-08-02 04:55:04 +00:00
Sam Leffler
9ee0e22742 support for 802.11 packet injection via bpf
Reviewed by:	arch@
MFC after:	1 month
2006-07-26 03:30:50 +00:00
Warner Losh
dbde02fe74 Add a few more devices to the supported list. Specifically, the PHAROS and
the silly dongly I just bought at Radio Shack.
2006-07-24 19:47:00 +00:00
Andrew Thompson
3bdf75a5ca Change the multicast calculation to be the same as the other usb drivers and
avoid calling into the usb code with the lock held. This doenst fix the
fundamental usb sleeping problem but at least the adapter can be used.
2006-07-05 00:49:26 +00:00
Maxim Konovalov
b01f957bcd o Remove rev. 1.30 leftover. From Damien: However, this code path
is never taken since there aren't any 802.11a ural(4) sticks available
on the market.

PR:		kern/99676
Submitted by:	KIYOHARA Takashi
Reviewed by:	damien
MFC after:	1 week
2006-07-01 13:39:04 +00:00
Takanori Watanabe
84c269d3f3 Comment fix.
Pointed out by: ume via IRC
2006-06-29 06:31:13 +00:00
Takanori Watanabe
bc5f8a4e55 Willcom WSIM DD support. 2006-06-29 06:17:48 +00:00
Matteo Riondato
0a8d09fe8a Add a forgotten "," 2006-06-19 16:31:58 +00:00
Matteo Riondato
d8eab5725f Add Hamlet eXagerate XURS232 USB-Serial adapter
PR:		usb/98983
Submitted by:	Massimo Lusetti
MFC after:	1 week
2006-06-19 16:30:35 +00:00
Alexander Leidinger
8cc6aade65 Add support for the Aceeca Mez1000 RDA.
PR:		82839
Submitted by:	Mike Durian <durian@shadetreesoftware.com>
2006-06-18 17:55:29 +00:00
Alexander Leidinger
8128fd701e Add support for:
- Curitel PC5740 Wireless Modem (Verizon's PCMCIA card)
 - Sierra MC5720 Wireless Modem (Built in to Thinkpad X60s)

PR:		98908
Submitted by:	Michael Collette <metrol@metrol.net>
2006-06-18 17:54:33 +00:00
Alexander Leidinger
04cb71301e Add support for:
- Curitel PC5740 Wireless Modem (Verizon's PCMCIA card)
 - Sierra MC5720 Wireless Modem (Built in to Thinkpad X60s)

The scanner in the PR is already supported.

PR:		98908
Submitted by:	Michael Collette <metrol@metrol.net>
2006-06-18 17:43:38 +00:00
Alexander Leidinger
4e93c5c41e Add Epson Perfection 1270 scanner. All other scanners in the PR are already
detected, but with a different name.

PR:		98106
Submitted by:	Lars Engels <lars.engels@0x20.net>
2006-06-18 17:29:16 +00:00
Alexander Leidinger
e932b6c236 When attaching an Xbox 360 gamepad a computer, the LED on the gamepad
blinks by default. When the operating system (read: normally an Xbox
360) initializes the gamepad, the LED stops blinking.

Change our uhid code to do the same.

PR:		97169
Submitted by:	Ed Schouten <ed@fxq.nl>
2006-06-18 17:18:17 +00:00
Ian Dowse
c62502d1f6 Fix a number of cases where ugen would panic, especially when the
device went away while open or if you tried to change the config
number while devices were open. Based on the patch from the PR with
a number of changes as discussed with the submitter.

PR:		usb/97271
Submitted by:	Anish Mistry
2006-06-05 14:44:39 +00:00
Ian Dowse
a48ddf5b85 Add a sleep lock that protects access to sequences of blocking
axe_cmd() calls. Without this the device can get confused if multiple
threads attempt these operations concurrently. The problem was
easily reproducible by running "ifconfig axe0" in a loop because
eventually it would conflict with axe_tick_task().

A similar approach is probably required in all USB ethernet drivers.
2006-06-04 14:42:38 +00:00
Ian Dowse
3b63ffa20c Allow zero-length read/write operations to get through to the
hardware. Also set both the read and write timeouts from the
USB_SET_TIMEOUT ioctl.
2006-06-03 10:37:42 +00:00
Sam Leffler
ff046a6c6b add missed calls to bpf_peers_present 2006-06-02 23:14:40 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
Ian Dowse
46f1e0d36c If a zero-length bulk or interrupt transfer is requested then assume
USBD_FORCE_SHORT_XFER to ensure that we actually build and execute
a transfer. This means that the various alloc_sqtd_chain functions
will always construct a transfer, so it is safe to modify the
allocated descriptors on return. Previously there were cases where
a zero length transfer would cause a NULL dereference.

Reported by:	bp
2006-05-28 23:37:04 +00:00
Ian Dowse
368030a87a Use the limited scatter-gather capabilities of ehci, ohci and uhci
host controllers to avoid the need to allocate any multi-page
physically contiguous memory blocks. This makes it possible to use
USB devices reliably on low-memory systems or when memory is too
fragmented for contiguous allocations to succeed.

The USB subsystem now uses bus_dmamap_load() directly on the buffers
supplied by USB peripheral drivers, so this also avoids having to
copy data back and forth before and after transfers. The ehci and
ohci controllers support scatter/gather as long as the buffer is
contiguous in the virtual address space. For uhci the hardware
cannot handle a physical address discontinuity within a USB packet,
so it is necessary to copy small memory fragments at times.
2006-05-28 05:27:09 +00:00
Ian Dowse
e97ba859b3 NULL out ii->stdstart and ii->stdend when they are invalid. This
is not necessary for correct operation but makes it clearer that
freed transfer descriptors cannot be accessed.
2006-05-28 01:17:13 +00:00
Ian Dowse
a7c15197cf Fix a harmless typo where the software pointer in the dummy QH for
control transfers did not match the hardware pointer.
2006-05-28 01:07:46 +00:00
Ian Dowse
203eec4b02 Defer axe_tick processing to a USB task, since axe miibus operations
need to sleep. This avoids an INVARIANTS panic. It looks like if_rue
and if_aue need a similar change, but I don't have hardware to test.
2006-05-27 23:46:13 +00:00
Ian Dowse
093daa268f Attempt to follow the procedure described in section 4.10 of the
EHCI spec for linking in new qTDs into an asynchronous QH. This
requires that there is a qTD marked as not active and not halted
at the start of the QH's list, and the hardware will know to re-fetch
the qTD on each pass rather than just looking at the overlay qTD:

  "The host controller must be able to advance the queue from the
  Fetch QH state in order to avoid all hardware/software race
  conditions. This simple mechanism allows software to simply link
  qTDs to the queue head and activate them, then the host controller
  will always find them if/when they are reachable."

This is achieved by keeping an "inactivesqtd" entry on the QH list,
and re-using it each time as the start of the next transfer, and
allocating a new qTD to become the next inactivesqtd. Then a new
transfer can be activated by just setting its "active" flag, which
avoids all the previous messing with overlay qTD state in
ehci_set_qh_qtd().
2006-05-24 03:04:11 +00:00
Ian Dowse
1bbda613eb When usb_event_thread() first starts, wait significantly longer
before starting exploring (4 seconds), and extend the wait period
if new USB buses are attached while waiting.

This works around a problem seen when there is more than one EHCI
controller in the system and you kldload usb.ko after the system
has booted. The problem is that usb.ko contains 3 separate PCI
drivers which get initialised one by one (uhci, ohci, ehci), and
when each driver is initialised, all PCI buses are re-probed after
just the addition of that driver. This means that there can be a
significant delay between the attaching of a companion controller
and the subsequent EHCI attach, so it is possible for the companion
controller's USB 1.x bus to be scanned before the EHCI driver gets
a chance to check if there is really a USB 2.x device connected.
2006-05-23 01:27:23 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
Warner Losh
f4d167bdda Don't use ", but instead use ' instead. I suppose I could have also
used \".  When compiling with USB_VERBOSE, this causes syntax issues.

Noticed by:  Hans Petter Selasky
2006-04-27 17:33:25 +00:00
Florent Thoumie
e79417e5d4 - Add support for the Acer Acerscan 640BT.
- Add documentation bits.

PR:		usb/95616
Submitted by:	Matthieu Guegan <lesaint@gcu.info>
Approved by:	cperciva (mentor)
MFC after:	3 days
2006-04-11 10:44:31 +00:00
Florent Thoumie
281f5eff33 - Add support for the Epson RX425 scanner.
PR:		usb/95346
Submitted by:	Matthieu Guegan <lesaint@gcu.info>
Approved by:	cperciva (mentor)
MFC after:	3 days
2006-04-10 10:21:09 +00:00
Sam Leffler
512537d1a4 stop device so we don't panic on card removal when active
MFC after:	3 days
2006-03-24 19:11:26 +00:00
Ian Dowse
3ee42667a4 Correct the calculation of the report size and only look at reports
that have the specified kind, instead of assuming that there is
only one report of the right kind in the report descriptor.

Submitted by:	Morten Johansen
Obtained from:	NetBSD (indirectly)
PR:		usb/77604
2006-03-22 02:04:12 +00:00
Ian Dowse
1ecfb7ed3d Oops - fix the build in the !USB_DEBUG case. 2006-03-18 17:57:34 +00:00
Ian Dowse
a6725353dd Let the EHCI hardware track the toggle state for bulk and interrupt
transfers. This fixes some cases where the software toggle tracking
was not doing the right thing. For example, a short transfer that
transferred 0 bytes of the requested qTD transfer size does cause
a toggle change, but the existing code was assuming it didn't.

Reported and tested by: pav
MFC after:	2 weeks
2006-03-18 13:55:16 +00:00
Ian Dowse
fad8387468 Sony DSC cameras with revision number 6.0 require the same quirk
as those reporting revision 5.0.

Reported by:	Brian Reichert
MFC after:	1 week
2006-03-17 18:16:22 +00:00
Poul-Henning Kamp
327643e3ca When we get an unknown ATAPI comand, try it even if it is not listed,
in all likelyhood just passing it through will work.
2006-03-05 17:52:32 +00:00
Warner Losh
e8bfdb2a33 Don't free ifaces yet, should fix a panic 2006-03-01 06:31:24 +00:00
Maksim Yevmenkin
2d6b1da721 Make ukbd(4) to not delay break scancodes in "raw" mode.
Developed with:		Norbert Koch < NKoch at demig dot de >
No response from:	freebsd-current@
Tested by:		Norbert Koch < NKoch at demig dot de >
MFC after:		1 day
2006-02-28 03:34:06 +00:00
Warner Losh
04a6a8a8e5 Since we set the decription, we don't need to also print it. Noticed by: ru@ 2006-02-27 19:40:37 +00:00
Warner Losh
b0e8c55437 Don't forget to free the ifaces when we free the ivars 2006-02-27 19:36:22 +00:00
Ian Dowse
564d760afe Add the Tripp-Lite U209-000-R serial adapter.
PR:		usb/78543, usb/93347
MFC after:	1 week
2006-02-27 01:01:27 +00:00
Ian Dowse
cc06b755fe The UQ_OPEN_CLEARSTALL entry added in revision 1.48 is no longer
required now that we save the data toggle when closing a pipe.

Verified by:	Fredrik Lindberg
2006-02-26 22:20:45 +00:00
Ian Dowse
78e3c96cc9 Save and restore the data toggle value when a pipe to an endpoint
is closed and then reopened. This appears to be necessary now that
we no longer clear endpoint stalls every time a pipe is opened.
Previously we could assume an initial toggle value of zero because
the clear-stall operation resets the device's toggle state.

Reported by:	Holger Kipp
MFC after:	3 days
2006-02-26 02:57:57 +00:00
Ian Dowse
b184cddcc2 Add a missing ohci_waitintr() call that allows polled operation of
bulk transfers to have a chance of working.

PR:		usb/93720
Submitted by:	Nate Nielsen
MFC after:	1 week
2006-02-25 17:44:29 +00:00
Ian Dowse
199a2380fe Add a UQ_OPEN_CLEARSTALL quirk for devices that need a clear-stall
operation when a pipe is opened, and add an entry for the ST Micro
biometric CPU.

Submitted by:	Fredrik Lindberg
MFC after:	1 week
2006-02-19 14:48:02 +00:00
Sam Leffler
08d7a88599 use s/w bmiss facility
MFC after:	1 week
2006-02-18 01:04:08 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Gleb Smirnoff
2ce61916c2 Typo: s/fint/find/ 2006-02-12 17:32:59 +00:00
Ian Dowse
496a1b8908 Add USB polling calls to umass_cam_poll(). This appears to be enough
to make kernel crash dumps to umass devices work, at least in some
cases.
2006-02-12 15:51:03 +00:00
Warner Losh
0085aa8869 Improve the memory resoruce allocation and usage during the probe.
I've had these improvements in my tree for almost a year now...
2006-02-11 03:41:20 +00:00
Warner Losh
55303171a4 Use the release version as a floor, not an exact match. Add comment to that
effect and draw attention to the fact that the list has stronger ordering
requirements than before.
2006-02-11 03:30:17 +00:00
Warner Losh
5df2beab5b Give ohci_intr a proper return value. In FreeBSD, this is void. Remove
now-redundant cast on establishing the interrupt.
2006-02-11 03:29:02 +00:00
Warner Losh
da8341a31a Update the keyspan product list from NetBSD. 2006-02-11 03:27:57 +00:00
Warner Losh
01538a58fd ADDON is registered as 0x0d7d, not PNY. Don't confuse the two as we
try to use the registrant for numbers in this file, not the OEM that
put their label on it.  Use PNY's real number 0x154b.  Add another PNY
atachmate with quirks from a PR filed a while ago, but that I can't
seem to find now...
2006-01-31 19:09:38 +00:00
Florent Thoumie
b308457205 - Add a scsi_da.c and a umass.c quirk for Genesys 6-in-1 Card Reader.
Reported by:	anders on freebsd-usb@
Tested by:	anders
Approved by:	ssouhlal
MFC after:	3 days
2006-01-30 20:27:44 +00:00
Florent Thoumie
5cd7adbfe3 - Add a umass quirk that should have been part of latest commit.
Approved by:	iedowse (implicit)
MFC after:	3 days
2006-01-26 01:23:29 +00:00
Florent Thoumie
fa9d414d41 Add Product IDs :
- Sandisk Cruzer Micro 128MB [5]
- DANE-ELEC zMate 512MB USB flash drive [7]
- Attache 256MB USB 2.0 Flash Drive [8]
- Sandisk Cruzer Micro 256MB [9]

Add scsi_da.c quirks :
- Samsung USB key 128Mb [1]
- Kingston DataTraveler 2.0 [2]
- Creative MuVo Slim [3]
- United MP 5512 Portable MP3 Player [4]
- Sandisk Cruzer Micro 128MB [5], [9]
- PNY USB Flash keys [6], [7], [8]

Add umass.c quirks :
- Sandisk Cruzer Micro 128MB [5]
- DANE-ELEC zMate 512MB USB flash drive [7]
- Attache 256MB USB 2.0 Flash Drive [8]
- Sandisk Cruzer Micro 256MB [9]

PR:		usb/90081 [1],
		usb/89196 [2],
		kern/86131 [3],
		usb/80487 [4],
		usb/75970 [5],
		usb/75578 [6],
		usb/72344 [7],
		usb/65436 [8],
		usb/70835 [9]
Submitted by:	Henri-Pierre CHARLES <hpc@prism.uvsq.fr> [1],
		Andrey Simonenko <simon@comsys.ntu-kpi.kiev.ua> [2],
		Erich Rickheit KSC <rickheit-fbp@numachi.com> [3],
		tnu@chania.di.uoa.gr [4],
		Bram Abbekerk <bram@abbekerk.demon.nl> [5],
		Thomas Pornin <pornin@bolet.org> [6],
		parv <parv@pair.com> [7],
		Peter D. Quilty <pdquilty@adelphia.net> [8],
		Raymundo M. Vega <rvega@ms-smtp-03-eri0.socal.rr.com> [9]
Approved by:	iedowse
MFC after:	3 days
2006-01-26 00:35:54 +00:00
Damien Bergamini
f014cff4cd account tx retry-fail errors in if_oerrors. 2006-01-21 12:46:57 +00:00
Damien Bergamini
e97333cbc4 Adjust tx power based on user preferences. 2006-01-21 10:45:07 +00:00
Damien Bergamini
25227ab8c5 o fix initialization sequence.
o re-enable ural_disable_rf_tune().
2006-01-21 10:25:51 +00:00
Damien Bergamini
1749c2163b Add two new ural(4) product ids.
Obtained from:	OpenBSD
2006-01-21 09:53:11 +00:00
Damien Bergamini
86d55f61a5 sync w/ openbsd:
o fix contention window
o silently discard received frames that are too short
o simplify lookup of 802.11a channels (we know they exist)
o fix short preamble support
o add short slot support
o fix eifs settings
o many consistency tweaks
2006-01-21 09:37:51 +00:00
Damien Bergamini
beee67e182 Fix computation of the tx retry count in AMRR. 2006-01-21 08:58:03 +00:00
Ariff Abdullah
ed3b31fc67 ehci_pci.c:
ATI EHCI controllers exhibit simmilar stall issues and require
	this dropped interrupts workaround. Be verbose about it.
ehci.c:
ehcivar.h:
	Slight change in comments to note about issues surrounding both
	VIA and ATI EHCI controllers.

Approved by:	iedowse
2006-01-16 19:23:59 +00:00
Ariff Abdullah
d26f1706b9 Add PCI vendor id for ATI OHCI USB controllers.
Approved by:	iedowse
2006-01-16 19:07:05 +00:00
Ian Dowse
afcb6f8261 Work around a problem seen on VIA EHCI controllers where occasionally
an interrupt appears to occur before the transfer has been marked
as completed. This caused umass transfers to get stuck, especially
when writing large files. The workaround sets up a timer that
rechecks for missed completed transfers if some operations are still
pending. Other suggested workarounds, such as performing a PCI read
immediately after acknowledging the interrupts, do not appear to
help.

Obtained from:	OpenBSD
2006-01-15 21:03:19 +00:00
Ian Dowse
df3e5efa87 Set sc_dying to 1 when detaching. In NetBSD and OpenBSD this was
done by the DVACT_DEACTIVATE case in *hci_activate(), but we don't
use that code in FreeBSD so it was never set.
2006-01-15 20:41:04 +00:00
Ian Dowse
c15e3d30c7 The ehci driver doesn't use the transfer `hcpriv' field, so don't
bother setting it to NULL in ehci_root_ctrl_done().
2006-01-15 20:32:52 +00:00
Scott Long
2ffb18fec1 Don't use the ALLOCNOW flag for tags that will only be used for static
allocations.
2006-01-10 22:55:35 +00:00
Takanori Watanabe
a0fe548a14 Add FOMA (NTT DoCoMo 3G mobile phone system) driver.
This is based on MCPC USB mobile phone guide line (MCPC-GL005)
Some other 3G system or so will work with this driver.
Kyocera PHS terminal (a.k.a. Kyopon) is known to work, which
is now supported by umodem(4) driver.
2006-01-09 17:46:36 +00:00
Florent Thoumie
465ad22910 Enable NO_GETMAXLUN quirk.
PR:		usb/90670
Submitted by:	Wojciech A. Koszek <dunstan@freebsd.czest.pl>
Approved by:	iedowse
MFC after:	1 week
2006-01-09 01:33:53 +00:00
Alexander Leidinger
b85f5cf149 Add support for Canon CanoScan D660U.
PR:		87395
Submitted by:	Eirik Mikkelsen <eirik@bsdbox.org>
2006-01-08 14:17:04 +00:00
Ian Dowse
662f5fb6d9 Remove the UQ_NO_OPEN_CLEARSTALL quirk, as this is now the default
behaviour for all devices.
2006-01-08 03:34:29 +00:00
Ian Dowse
dd35c3642c Don't perform an endpoint stall clear every time a pipe is opened.
This should not be necessary, and it is known to confuse certain
devices.

Obtained from:	NetBSD
Requested by:	many
2006-01-08 03:27:43 +00:00
Florent Thoumie
d908e8fa84 Add Product ID for Acerscan 1240u and the corresponding entry in uscanner.c.
PR:		usb/91466
Submitted by:	Cameron Lerch <cam@zarya.org>
MFC after:	3 days
Approved by:	ssouhlal
2006-01-08 01:43:00 +00:00
Maxime Henrion
bc184556bf Add a new vendor ID for Personal Cummunication Systems. They make a nice
USB HID device that allows to plug two PS2 controllers.  This specific
device doesn't work yet but will as soon as we support devices with
multiple report IDs.

MFC after:	3 days
2005-12-31 04:41:17 +00:00
Maxime Henrion
092dbdfb4c Add support for the Wacom Graphire 3 4x5. Like the Graphire 3, it has a
broken report descriptor.  While I'm here, make all the other report
descriptors const to match the newly added one.

Obtained from:	NetBSD
MFC after:	1 week
2005-12-31 04:38:50 +00:00
Maxime Henrion
0cb0bc8808 Add support for Xbox 360 gamepads. They are HID-capable devices, but
lack a report descriptor and don't use the standard interface class.
This patch works around these deficiencies so that the uhid(4) driver
can recognize and use those broken devices.

PR:		usb/90141
Submitted by:	Ed Schouten <ed@fxq.nl> (with minor mods from me)
MFC after:	1 week
2005-12-31 04:22:34 +00:00
Warner Losh
3fc2d9dbe5 Add a bunch of ipod entries, one as suggested by Bryan Liesner. We
should likely fix this better...

Submitted by: Bryan Liesner (ipod mini)
2005-12-30 05:06:26 +00:00
Alexander Leidinger
e5f62bf901 Sync the type (and size, compare mousestatus_t in /usr/include/sys/mouse.h)
of a variable according to the usage (after increasing the number of max
buttons this may matter).

Noticed by:	flz
2005-12-29 18:35:28 +00:00
Alexander Leidinger
d677792c20 Add support for the HP 8200C/8250C/8290C scanners.
PR:		90467
Submitted by:	Adam McDougall <mcdouga9@egr.msu.edu>
2005-12-29 18:25:25 +00:00
Alexander Leidinger
1b4c44fb4c Add support for the Canon CanoSvan LIDE 25.
PR:		89509
Submitted by:	David Gilbert <dgilbert@daveg.ca>
2005-12-29 18:15:03 +00:00
Alexander Leidinger
70422404a7 Merge NetBSD rev. 1.61:
- Support more than 7 buttons for USB mice. Patch from NetBSD kern/30248.

PR:		83353
Submitted by:	Seán Farley <sean-freebsd@farley.org>
2005-12-29 17:44:40 +00:00
Alexander Leidinger
247eac7f18 Add support for Epson 2480 scanner.
PR:		86094
Submitted by:	Erik Norgaard <norgaard@locolomo.org>
2005-12-29 17:38:03 +00:00
Alexander Leidinger
1ea136a1ca Emit USB_EVENT_DRIVER_DETACH on detach.
PR:		83247
Submitted by:	Sangwoo Shim <ssw@neo.redjade.org>
MFC after:	2 weeks
2005-12-29 17:29:18 +00:00
Florent Thoumie
333051eeb3 Add a hid blacklist quirk.
PR:		usb/80383
Submitted by:	Lonnie Mendez <lmendez19@austin.rr.com>
Tested by:	Adam Kropelin <akropel1@rochester.rr.com>, thierry, fenner
Approved by:	pjd
MFC after:	1 week
2005-12-27 23:35:38 +00:00
Pav Lucistnik
612477f7ac - Fix type in previous commit; unbreak build
Approved by:	ssouhlal
Pointy hat to:	pav
2005-12-20 23:07:38 +00:00
Pav Lucistnik
f651aa2d2f - Ignore incorrect CSW signatures on my PURE PocketDab 2000 player
Approved by:	ssouhlal
MFC after:	1 week
2005-12-20 16:21:17 +00:00
Pawel Jakub Dawidek
ef5d77f464 Allow to use TransFlash drive, which can be found in Motorola E398 Mobile Phone.
PR:		usb/89889
Submitted by:	Wojciech A. Koszek <dunstan@freebsd.czest.pl>
MFC after:	1 week
2005-12-19 03:27:28 +00:00
Florent Thoumie
949565fb05 - Add ProductID for the iPod Nano.
Reported by:	Nathan Kay <mcnate@numenor.net>
Approved by:	ssouhlal
MFC after:	3 days
2005-12-18 22:25:43 +00:00
John Baldwin
636a309adb Use %t (ptrdiff_t modifier) to print a couple of pointer differences rather
than casting them to int.
2005-12-15 21:57:32 +00:00
Florent Thoumie
17e41731b7 - Rename UQ_BROKEN_IPOD to UQ_NO_OPEN_CLEARSTALL since it's likely to be used
by more devices than iPods.

Proposed by:	iedowse
Approved by:	ssouhlal
MFC after:	3 days
2005-12-11 20:14:38 +00:00
Ian Dowse
2b58bea7c0 Reorder the calling of the completion callback and the transfer
"done" method so that for non-repeat operations we have completely
finished with the transfer by the time the callback is invoked.
This makes it possible to recycle a transfer from within the callback
routine for the same transfer. Previously this almost worked, but
with OHCI controllers calling the "done" method after the callback
would zero out some important fields needed by the recycled transfer.
Only some usb peripheral drivers such as ucom appear to rely on the
ability to reuse a transfer from its callback.

MFC after:	1 week
2005-12-08 03:08:17 +00:00
Florent Thoumie
645cf3805a - Add Product IDs for iPod 3G and iPod Video.
- Add an USB quirk for iPods, da(4) devices are now successfully created.

Approved by:	ssouhlal
MFC after:	1 week
2005-12-05 01:51:28 +00:00
Ruslan Ermilov
3238c6bd33 Fix -Wundef from compiling the amd64 LINT. 2005-12-04 10:06:06 +00:00
Bruce A. Mah
71ddfdfb45 Recognize the Sony Clie PEG-TJ37.
Tested on:	My PEG-TJ37 and my RELENG_6 workstation
MFC after:	1 week
2005-12-04 07:34:19 +00:00
Damien Bergamini
5a69e86294 Tell Rx radiotap that hardware leaves FCS at the end of the frame.
Obtained from:	NetBSD (drochner@)
2005-11-29 21:36:15 +00:00
Damien Bergamini
635df8de16 Use usbd_clear_endpoint_stall_async() instead of usbd_clear_endpoint_stall()
in Tx/Rx callbacks.

Obtained from:	NetBSD
2005-11-29 21:07:32 +00:00
Damien Bergamini
3d5dc80e4d o Send management frames at the lowest possible rate.
o Include rate in the Rx radiotap code.
o Fix RSSI value in the Rx path.
o Minor tweaks.
2005-11-29 20:55:53 +00:00
Ian Dowse
d63700b023 The ohci driver's processing of completed transfer descriptors (TDs)
appeared to rely on all kinds of non-guaranteed behaviours: the
transfer abort code assumed that TDs with no interrupt timeout
configured would end up on the done queue within 20ms, the done
queue processing assumed that all TDs from a transfer would appear
at the same time, and there were access-after-free bugs triggered
on failed transfers.

Attempt to fix these problems by the following changes:
 - Use a maximum (6-frame) interrupt delay instead of no interrupt
   delay to ensure that the 20ms wait in ohci_abort_xfer() is enough
   for the TDs to have been taken off the hardware done queue.
 - Defer cancellation of timeouts and freeing of TDs until we either
   hit an error or reach the final TD.
 - Remove TDs from the done queue before freeing them so that it
   is safe to continue traversing the done queue.

This appears to fix a hang that was reproducable with revision 1.67
or 1.68 of ulpt.c (earlier revisions had a different transfer
pattern). With certain HP printers, the command "true > /dev/ulpt0"
would cause ohci_add_done() to spin because the done queue had a
loop. The list corruption was caused by a 3-TD transfer where the
first TD completed but remained on the internal host controller
done queue because it had no interrupt timeout. When the transfer
timed out, the TD got freed and reused, so it caused a loop in the
done queue when it was inserted a second time from a different
transfer.

Reported by:	Alex Pivovarov
MFC after:	1 week
2005-11-27 09:05:37 +00:00
Ian Dowse
c20e7ce621 Revision 5.0 of the Sony DSC camera appears to require RBC commands
to be padded to 12 bytes in length. Otherwise the requests just
time out.

Reported by:	anders
MFC after:	1 week
2005-11-26 17:11:31 +00:00
Damien Bergamini
26664f807c o Pass received frames to radiotap.
o Remove some unsupported flags from the ic_caps field.
o Various cosmetic tweaks.

MFC after:	6 days
2005-11-25 21:15:07 +00:00
Damien Bergamini
38e00d27ea Fix AMRR initialization.
MFC after:	6 days
2005-11-25 19:32:29 +00:00
Damien Bergamini
f850597399 Send the packet to BPF after setting the duration field of the frame.
MFC after:	1 week
2005-11-24 21:40:24 +00:00
Damien Bergamini
08403499e7 o Force the sending of an extra URB if there is less than 2 bytes left
at the end of the last URB (URB = USB Request Block = 64 bytes).
o Free the AMRR reserved xfer in detach.
o Minor tweaks.

MFC after:	1 week
2005-11-24 21:31:39 +00:00
Damien Bergamini
8ea9781eed Optimize PLCP length field computation for 802.11b rates. 2005-11-23 17:32:57 +00:00
Damien Bergamini
72bae85020 Minor tweaks. 2005-11-19 15:08:05 +00:00
Damien Bergamini
8403bb96a2 Second part of the AMRR commit.
Enable automatic rate adaptation in BSS operating mode.
Works great here.  Will need a lot of testing though.
2005-11-18 21:37:02 +00:00
Damien Bergamini
903c939fd5 Add some initial bits (currently unused) for upcoming AMRR support.
AMRR = Adaptive Multi Rate Retry algorithm
More information: http://www-sop.inria.fr/rapports/sophia/RR-5208.html

More to come.
2005-11-15 17:58:16 +00:00
Damien Bergamini
8fe21ac40a Add some initial bits (currently unused) for upcoming AMRR support.
AMRR = Adaptive Multi Rate Retry algorithm
More information: http://www-sop.inria.fr/rapports/sophia/RR-5208.html
2005-11-15 17:48:49 +00:00
Damien Bergamini
43b60fd47d Optimize and clean TX time computation.
Avoid a test and a modulus operation.

MFC after:	2 weeks
2005-11-15 17:17:15 +00:00
Damien Bergamini
ba1362c549 Be more robust when handling Rx interrupts. If we can't allocate a new mbuf,
just discard the received frame and reuse the old mbuf.
This should prevent the connection from stalling after high network traffic.

MFC after:	2 weeks
2005-11-13 17:25:21 +00:00
Ian Dowse
a60c16ad2f Fix a > 1 year old typo that caused the ulpt driver to try reading
from the printer and discarding the data even if the ulpt device
was opened for reading. This resulted in crashes because two
conconcurrent read transfers were using the same transfer structure.

PR:		usb/88886
Reported By:	Alex Pivovarov
MFC after:	1 week
2005-11-12 17:39:31 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Bernd Walter
39283b0b4b Remove spl.
Restart request on USBD_IOERROR.

MFC after:	2 weeks
2005-11-05 17:17:57 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Poul-Henning Kamp
733634738e Eliminate two unused arguments to ttycreate(). 2005-10-16 20:22:56 +00:00
Hajimu UMEMOTO
9fa7087a67 add product ID for Linux Ethernet/RNDIS gadget on pxa210/25x/26x.
Submitted by:	Keiichi SHIMA <keiichi__at__iijlab.net>
MFC after:	2 days
2005-09-28 19:41:25 +00:00
Maxim Sobolev
b4a98d309e Add dummy support for ifmedia subsystem. This allows devd to see cdce as an
ethernet device and configure IP etc.

Submitted by:	Craig Boston <craig@tobuj.gank.org>
2005-09-26 05:29:46 +00:00
Alexander Leidinger
16f309f0e2 This part of the struct isn't needed on FreeBSD:
---snip---
FYI this bit isn't needed for FreeBSD - I think it came from either
OpenBSD or NetBSD where arc4random() wasn't available during cold
boot.
---snip---

Explained by:	iedowse
2005-09-24 14:49:36 +00:00
Warner Losh
c82f53f61d 'PC Card' instead of other variants 2005-09-22 06:01:44 +00:00
Warner Losh
a6869ccad0 Remove OLDCARD shims 2005-09-22 05:06:37 +00:00
Damien Bergamini
e26a9b9fff The "SMC EZ Connect SMC2862W-G" product is not based on the Ralink RT2500USB
chipset.

MFC after:	5 days
2005-09-19 18:19:22 +00:00
Alexander Leidinger
d4c4f2c099 ehcivar.h:
Synchronise with NetBSD upto rev 1.19:
		- Allow 32 chars in the saved vendor string.
		- Some NetBSD-only changes.
		- Some missing parts (define, variable).

ehci_pci.c:
	Add vendor ids for ATI and Philips.

	Add identification strings for the following:
		o ALi's M5239
		o AMD 8111
		o ATI SB200, SB400
		o Intel 6300ESB, ICH4, ICH5, ICH7
		o NVIDIA nForce 2, nForce 3, nForce 4
		o Philips ISP156x

ehcireg.h:
	We're at the same level as rev 1.18 from NetBSD.

usb_port.h:
	NetBSD/OpenBSD specific things

Obtained from:		NetBSD via DragonFly
No comment from:	usb@
2005-09-18 11:45:39 +00:00
Ruslan Ermilov
4180ad4d15 Add missing mtx_destroy() when if_alloc() fails.
Add missing if_free() when mii_phy_probe() fails.
Put if_free() into the correct #ifdef in detach().
2005-09-16 09:20:58 +00:00
Ruslan Ermilov
94a7d18b08 Add missing if_free() in rue_detach(). 2005-09-16 09:16:46 +00:00
David E. O'Brien
c679d15b66 Note that Keyspan is also InnoSys Inc. 2005-09-12 03:32:46 +00:00
Ian Dowse
f1129b105e Provide the USB device release number along with other parameters
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.

Submitted by:	Anish Mistry
2005-08-23 21:32:49 +00:00
Damien Bergamini
30feefb1d2 Fix basic rates set for 802.11a/g operating modes. This can significantly
improve transfer rates in 802.11a/g.  Fix IFS settings in ral(4) too.

MFC after:	6 days
2005-08-21 14:16:20 +00:00
Damien Bergamini
e0454c269b Don't automatically start scanning in if_init() if IEEE80211_ROAMING_MANUAL
flag is set.

MFC after:	1 week
2005-08-20 14:28:37 +00:00
Sam Leffler
b5c9941514 Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
  channel instead of overloading ic->ic_bss->ni_chan (or in some
  drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
  state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
  more like a scan cache--look for an existing entry before adding
  a new one; this combined with ic_curchan use corrects handling of
  stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
  a new ieee80211_add_neighbor routine

Reviewed by:	avatar
Tested by:	avatar, Michal Mertl
MFC after:	2 weeks
2005-08-10 16:22:30 +00:00
David E. O'Brien
fba19691c7 Add proper copyright attribution. 2005-08-10 03:54:37 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Ian Dowse
16a0ad03b8 Fix two bugs that interacted to cause page faults in softclock()
when using mice containing a tilt movement: there was a missing
usb_callout_init() for the UMS_SPUR_BUT_UP quirk code, and UMS_T
was defined to the same flag value as UMS_SPUR_BUT_UP.

Reported by:	flz
MFC after:	3 days
2005-08-04 02:21:37 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Sam Leffler
2c39b32c94 diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 16:50:18 +00:00
Xin LI
f467e51eba PLAY_MSF, PLAY_TRACK, PLAY_TRACK_REL, PAUSE, PLAY_12 commands to pass
through umass(4), in order to make cdcontrol(1) to issue commands to
a USB CD driver.

The command IDs were obtained from the CAM subsystem.  This was tested
on half dozen of USB CD drivers from different vendors.

Suggested by:	"intron" <intron at intron dot ac>
PR:		usb/83439
Reviewed by:	sanpei
MFC After:	1 week
2005-07-19 05:18:23 +00:00
Warner Losh
f83fe7ce90 Don't wait for the printer to become ready before allowing the open to
succeed.  There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically.  Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way...  If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).

In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'.  This
fixes the EBUSY on open timeouts on those printer as well.

Reviewed by: the defining silence on usb@
2005-07-15 04:19:42 +00:00
Takanori Watanabe
39e5901ee7 Add SL811 based host controller driver for CF usb host controller.
This is based on NetBSD slhci(4) driver for X68k amateur hardware.
For now, it will not work properly, but it can detect usb device
insertion.
2005-07-14 15:57:01 +00:00
Takanori Watanabe
05cb19d7c2 Prepare to commit SL811 based Host controller driver. 2005-07-14 14:19:05 +00:00
Sam Leffler
7c5636947b remove driver-private key allocators; use the default one instead
so wpa keys are handled properly

Reviewed by:	avatar
Approved by:	re (scottl)
2005-07-10 00:17:05 +00:00
Damien Bergamini
df00c70d2e Make sure that all the necessary USB endpoints are found during device
attachment.

Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-08 19:19:06 +00:00
Damien Bergamini
11c70aecee ral_init() takes a struct ral_softc as parameter not a struct ifnet.
Fixes a panic that occured when setting the interface parameters while
the interface was associated.

Approved by:	re (scottl)
2005-07-08 19:13:49 +00:00
Sam Leffler
0a5ae7ccb8 reclaim node reference when ieee80211_encap fails
Reviewed by:	avatar
Approved by:	re (scottl)
2005-07-08 16:31:19 +00:00
Sam Leffler
025afcf2d5 update ural ids
Reviewed by:	damien
Approved by:	re (scottl)
Obtained from:	openbsd
2005-07-08 16:28:24 +00:00
Sam Leffler
82145663e3 reclaim mbuf when ieee80211_crypto_encap fails
Approved by:	re (scottl)
Obtained from:	netbsd
2005-07-07 02:55:04 +00:00
Hiroki Sato
c88f124134 Add support for IODATA USB-RSAQ3 USB-Serial Adapter.
Reported by:	Tomokazu Hirai
Approved by:	re (scottl)
MFC after:	3 days
2005-07-03 23:51:16 +00:00
Damien Bergamini
7f5ea03de8 o Add new ids for the Belkin F5D7050
o Indent usb ids properly
o Check the return value of if_alloc()
o Call if_free() in ural_detach()

Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-03 15:38:41 +00:00
Damien Bergamini
3dde707f68 Add another ural(4) device (Belkin F5D7050)
Reviewed by:	silby (mentor)
Approved by:	re (scottl)
2005-07-03 15:34:32 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Benno Rice
22dfcd1b30 Identify the Intel ICH4 EHCI controller. 2005-06-10 08:28:22 +00:00
Warner Losh
0613b6f9c4 Power state management now done in PCI bus code 2005-06-05 22:53:09 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Damien Bergamini
150bb7c348 Fix WPA (802.11i) support.
Approved by:	silby (mentor)
2005-05-22 18:34:20 +00:00
Marius Strobl
cf87ad7afd Recognize the integrated USB controllers of Sun PCIO-2 chips which
are used onboard in most of the newer PCI-based sun4u machines
(cosmetic change as they were also already probed as generic OHCI
without this). Detect whether their intpin register is valid and
correct it if necessary, i.e. set the respective IVAR to the right
value for allocating the IRQ resource, as some of them come up
having it set to 0 (mainly those used in Blade 100 and the first
one on AX1105 boards). This fixes attaching affected controllers.
Correcting the intpin value might be better off in the PCI code
via a quirk table but on the other hand gem(4) and hem(4) also
correct it themselves and at least for the USB controller part
the intpin register is truely hardwired to 0 and can't be changed.
This means that we would have to hook up the quirk information
in a lot of places in the PCI code (i.e. whenever the value of the
intpin register is read from or written to the pci_devinfo of the
respective device) in order to do it the right way.

MFC after:	1 month
2005-05-19 23:00:46 +00:00
Warner Losh
ce86397a98 Add convenience functions to get port and interface. 2005-05-16 06:58:43 +00:00
Alexander Kabaev
59195c3a3d Plug a potential memory leak.
Noticed by: Coverity Prevent analysis tool.
2005-05-11 18:53:14 +00:00
Warner Losh
3ecc7feefc Take out Giant in uhub_child_* in giant. There's one place where we
could sleep which I think can lead to races.  However, there are fewer
with this code than without it.

Submitted by: Hans Petter Selasky
2005-05-11 15:21:22 +00:00
Julian Elischer
6efba7ef05 A patch to support Palm Tungsten T via USB-Cradle.
not suer where it comes from but suspect kimoto at ohnolab.org

MFC after:	1 week
2005-05-04 00:46:24 +00:00
Damien Bergamini
ceaec73d40 Initial import of ipw, iwi, ral and ural drivers:
ipw  - Intel PRO/Wireless 2100
iwi  - Intel PRO/Wireless 2200BG/2225BG/2915ABG
ral  - Ralink Technology RT2500
ural - Ralink Technology RT2500USB

Approved by:	silby (mentor)
2005-04-18 18:47:38 +00:00
Ian Dowse
f04d2ba47f Fix the handling of the UCS_RXSTOP flag so that it always tracks
whether or not the receive pipe is stopped. This ensures that we
do not attempt to start the same transfer twice, and it allows
ucomstop() to skip the restarting of the read pipe if it was not
originally running, such as when called indirectly from ucomreadcb().

PR:		kern/79420
MFC after:	1 day
2005-04-12 00:26:40 +00:00
Lukas Ertl
0ec44eb5e2 Add support for Sitecom USB to serial cable (v2)
PR:            usb/79230
Submitted by:  Rick van der Zwet <rick@wzoeterwoude.net>
2005-04-08 12:48:05 +00:00
Bernd Walter
1b285e5cce Add support for FTDI's FT2232C twin channel chip.
Tested by: Mike Tancsa <mike@sentex.net>
2005-04-05 22:09:18 +00:00
Bernd Walter
8a95014be7 remove usbd_errstr(err) from printf.
err has nothing to say about this specific error.
2005-04-05 22:03:07 +00:00
Ian Dowse
04d114aa99 Use the usb_callout_* API instead of timeout()/untimeout() in order
to avoid a race condition that can cause the ukbd timeout routine
to run after the keyboard has detached.

Reported and tested by:	wpaul
2005-03-30 08:32:41 +00:00
Ian Dowse
61c43c6d8d Don't defer the boot-time exploration of high-speed USB busses.
This ensures that we explore EHCI busses before their companion
controllers' busses, so that ports connected to full/low speed
devices will be properly routed to the companion controllers by the
time the OHCI/UHCI exploration occurs.
2005-03-27 15:31:23 +00:00
Maxim Sobolev
e33b116b78 Comment out rue_miibus_statchg() function. Using trial-and-error approach I
found it guilty in putting the card into unusable state after UP->DOWN->UP
media status change.

Looks like some of register writes in this functions mess up PHY interface.

No visible regressions has been found after commenting this code out -
the card properly handles forceful local mode changes and auto-detects changes
made remotely (tested with Auto, 10HD, 10FD, 100HD, 100FD).

Sponsored by:	PBXpress Inc.
MFC after:	3 days
2005-03-25 20:19:18 +00:00
Maxim Sobolev
ddbcc78273 Add /* _FOO_H_ */ after the final #endif to make danfe happy. 2005-03-25 13:22:58 +00:00
Maxim Sobolev
8eadbd831e Fix identation. 2005-03-25 12:55:06 +00:00
Maxim Sobolev
f1cc4b713e Add missed KUE_UNLOCK(). This is NOOP yet, but may be handy later on. 2005-03-25 12:53:26 +00:00
Maxim Sobolev
5135f8e687 Fix breakage in the previous commit caused by the last-minute change. 2005-03-25 12:50:57 +00:00
Maxim Sobolev
87fcbb8fe0 Protect against multiple inclusions. 2005-03-25 12:49:26 +00:00
Maxim Sobolev
d521dc21e7 Move Rx/Tx lists management routines into central location. 2005-03-25 12:42:30 +00:00
Maxim Sobolev
710fa1d820 GC unused fields. 2005-03-25 10:39:23 +00:00
Maxim Sobolev
9245facb49 GC unused field. 2005-03-25 09:48:24 +00:00
Ian Dowse
5e1f111310 Fix an incorrect NULL argument to usbd_set_interface() associated
with the ALT_IFACE_1 quirk.

PR:		usb/79190
Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2005-03-25 01:47:01 +00:00
Ian Dowse
e2b66de827 Use usbd_get_string() instead of calling usbd_get_string_desc()
with the wrong language parameter when retrieving the device serial
number. This invalid request caused some devices not to work at
all.

PR:		usb/79190
Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
2005-03-25 01:44:38 +00:00
Maxim Sobolev
8a9cf808e6 Move xxx_newbuf() function, which was the same in all drivers into central
location.
2005-03-25 00:44:21 +00:00
Ian Dowse
70a18c2253 Use M_NOWAIT when allocating from a callout routine.
PR:	kern/73295
2005-03-25 00:38:46 +00:00
Maxim Sobolev
4562351ad0 Zaurus expecrs CRC to be in little-endian order, so that convert it into LE
on BE arches.

Obtained from:	OpenBSD
2005-03-22 16:35:15 +00:00
Maxim Sobolev
6bcf003260 Add USB Communication Device Class Ethernet driver. Originally written for
FreeBSD based on aue(4) it was picked by OpenBSD, then from OpenBSD ported
to NetBSD and finally NetBSD version merged with original one goes into
FreeBSD.

Obtained from:  http://www.gank.org/freebsd/cdce/
                NetBSD
                OpenBSD
2005-03-22 14:52:40 +00:00
Maxim Sobolev
c159c9d8bb Add the following products in preparation for addition of CDCE driver:
- G.Mate, Inc's YP3X00 PDA;

 - Prolific's PL2501 Host-Host interface;

 - Numver of Sharp's Zaurus PDAs.
2005-03-21 08:43:54 +00:00
Ian Dowse
20289f7920 Root hubs don't have transaction translators, so skip printing the
message about them if the hub depth is zero.
2005-03-20 23:45:00 +00:00
Ian Dowse
0b07d58eb3 Don't display the redundant `ehci_pci_attach: companion usbX'
messages unless EHCI debugging is enabled.

Suggested by:	scottl
2005-03-20 23:42:54 +00:00
Ian Dowse
a3a574f503 Remove trailing whitespace as per NetBSD's revision 1.91. Also
update the TODO comments to more closely match current reality.
2005-03-20 22:22:18 +00:00
Ian Dowse
4c11f583a3 Now that all architectures allow hooks to be inserted before
configure_final(), assert that "cold" is true in usb_cold_explore()
when there are busses to explore. When USB is kldloaded after boot,
usb_cold_explore() will still get invoked but the list of busses
to explore in that case should always be empty.
2005-03-19 19:27:38 +00:00
Ian Dowse
a3d327674a It was possible to have two threads concurrently aborting the same
transfer, which lead to panics or page faults. For example if a
transfer timed out, another thread could come along and attempt to
abort the same transfer while the timeout task was sleeping in
the *_abort_xfer() function.

Add an "aborting" flag to the private transfer state in each host
controller driver and use this to ensure that the abort is only
executed once. Also prioritise normal abort requests over timeouts
so that the callback is always given a status of USB_CANCELLED even
if the timeout-initiated abort began first.

The crashes caused by this bug were mainly reported in connection
with lpd printing to a USB printer.

PR:	usb/78208, usb/78986
2005-03-19 19:08:46 +00:00
Bernd Walter
65a5e4be3d initialize pp->p_sc so it can be referenced later.
dynamicaly allocate the per port array.
allow up to 32 serials per USB device.
ask the device for correct pipe sizes.
2005-03-17 22:47:18 +00:00
Ian Dowse
a7b66eb1ae Defer boot-time exploration of USB busses until all devices in the
system have been attached, but no later. This ensures that we do
not explore ohci or uhci busses before the companion echi controller
has been initialised, so it should fix the problem of multi-speed
USB devices getting attached as USB 1 devices first and then
re-attached as USB 2.

Some further changes are needed on architectures that do not currently
allow hooks to be inserted before configure_final() - alpha, ia64,
powerpc and sparc64. On these architectures the exploration will
now be delayed until the usb kthread runs.
2005-03-17 19:41:19 +00:00
Ian Dowse
7515d96b78 Add support for the ethernet port in the JVC MP-PRX1 port replicator. 2005-03-14 01:49:00 +00:00
Ian Dowse
bc7744545d Set the split transaction interrupt C-mask correctly. This is the
final piece needed to make split transaction interrupt pipes work,
which I thought I had already committed.
2005-03-14 01:03:50 +00:00
Ian Dowse
f4b4a6b096 The EHCI qTD token has a number of error status bits that are not
cleared if the host controller retries the transfer and is successful,
but we were interpreting these bits as indicating a fatal error.
Ignore these error bits, and instead use the HALTED bit to determine
if the transfer failed. Also update the USBD_STALLED detection to
ignore these bits.

Obtained from: OpenBSD
2005-03-13 23:48:17 +00:00
Ian Dowse
76d8aa3efe Fix the arrangement of periodic QH tree to give the correct interval
between passes over a QH. Previously the accesses to a QH were
bunched together in time, so the interval was often much longer
than intended. This now appears to match the diagrams in the EHCI
spec, so remove the XXX comment.
2005-03-13 04:07:40 +00:00
Ian Dowse
2f9b6e1f34 Fix the silly bug that prevented most EHCI interrupt transfers from
ever working correctly: the code was linking the QHs together but
then immediately overwriting the "next" pointers. Oops. Also
initialise qh_endphub, since the EHCI spec says that we should
always set the pipe multiplier field to something sensible.

This appears to make basic split transactions work, so enable split
transactions for control, bulk and interrupt pipes (split isochronous
transfers are not yet implemented). It should now be possible to
use USB1 devices even when they are connected through a USB2 hub.
2005-03-08 02:47:18 +00:00
Maxim Sobolev
21a69c81c0 Merge from NetBSD.
o usb_subr.c, add delta 1.119:

  Move usb_get_string() and make it public.

o usbdi.c, bring on par with 1.106, this includes:

  - Make an iterator abstraction for looping through all descriptors.

  - Whine about not being able to figure out default language if we are debugging.

  - Move usb_get_string() and make it public.

o usbdi.h, bring on par with 1.64, this includes:

  - Make an iterator abstraction for looping through all descriptors.

  - Move usb_get_string() and make it public.

o usbdi_util.c, bring on par with 1.42, this includes:

  - Add usbd_get_protocol().

  - Use NULL instead of 0.

  - Fix (mostly harmless) typo.

  - Move utility routine from uirda.c to usbdi_util.c.

o usbdi_util.h, bring on par with 1.31, this includes:

  - Add usbd_get_protocol().

  - Move utility routine from uirda.c to usbdi_util.c.

MFC after:	3 days
2005-03-01 08:01:22 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Maxim Sobolev
d524bc1aa1 Sync with 1.9 from NetBSD, this includes:
o Add Ethernet descriptor.

o Use attribute packed for on-the-wire data structures.

MFC after:	3 days
2005-03-01 06:35:04 +00:00
Ian Dowse
e0a4f554be Abort any active transfers when the device detaches. This fixes a
few situations where we used to crash, but by no means all of them.
2005-02-14 02:17:53 +00:00
Ian Dowse
d83604e89a Add a new function usbd_abort_default_pipe() that aborts any transfers
on the default pipe. This is helpful in device detach routines to
stop any active control transfers.
2005-02-14 01:51:51 +00:00
Ian Dowse
a66e65f5a9 When attached to a high-speed device, report a more appropriate
base transfer speed to CAM. The actual value used (40MB/s) is fairly
arbitrary, but assumes the same 33% overhead as was implied by the
1MB/s figure we used for USB1 devices.
2005-02-13 21:38:34 +00:00
David E. O'Brien
61d087cf53 Fix problem with some logitec usb wireless mice.
Submitted by:	Markus <mw@kpnqwest.ch>
Tested by:	Randy Bush <randy@psg.com>
2005-02-06 12:41:00 +00:00
Shunsuke Akiyama
4b6cd0347a Use a taskqueue to handle port status changes.
Calling ucom layer directly from interrupt context make a panic.

MFC after:	1 week
2005-01-31 13:58:10 +00:00
Shunsuke Akiyama
7db2e52424 - Add support for new chips, PL-2303X and PL-2303HX.
- Update comment about datasheet.
- Fix minor typo in sysctl variable description.

Submitted by:	Michal Mertl <mime@traveller.cz>
MFC after:	1 week
2005-01-25 14:38:21 +00:00
Warner Losh
bec6d0ea5a Although USBVERBOSE was an option in the config system, usb_subr.c failed
to recognize that.  Include opt_usb.h to pick it up, rather than usb_port.h.
2005-01-20 05:03:28 +00:00
Shunsuke Akiyama
1f41d5d83a Fix USB serial device stalled after tcflush() was called.
PR:		kern/65769
MFC after:	3 days
2005-01-19 15:18:00 +00:00
Warner Losh
ad3142eda4 MFp4:
sc_child isn't used on FreeBSD, so ifdef it out in a way that is
NetBSD mergeable.
2005-01-11 07:34:13 +00:00
Julian Elischer
4f93332f16 fix a "little-endian-big-endian confusion that luckily:
1/ doesn't matter on most of our architectures
2/ will never happen unless we start queueing multiple trasactions
to a single endpoint at one time (which we do not allow yet).
If anyone has a big_endian machine with EHCI they might check this
if they are having problems with EHCI but it's unlikely even there..

Submitted by:	Hans Petter Selasky <hselasky@c2i.net>
MFC after:	3 days
2005-01-09 23:49:45 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Warner Losh
a8c5ecf70f add copyright notice to something I wrote that didn't have one 2005-01-06 01:36:28 +00:00
Giorgos Keramidas
285d9e0fa7 Fix KASSERT inversion that was introduced in 1.150, resulting in instant
panic curlen != 0, which is perfectly normal.

Approved by:	mux
2005-01-05 20:10:05 +00:00
Julian Elischer
4eefd67bb0 Fix comment. One of the two "Step 4" shuold be a "step 5" 2005-01-05 01:04:35 +00:00
Julian Elischer
a8ef988f65 Remove comment that doesn't seem to be true and add comments describing
what is going on, to replace it. Slight formatting changes
Code here is alredy different to NetBSD.
MFC after:	1 week
2005-01-03 08:52:26 +00:00
Julian Elischer
2410443379 A much simpler way to work out if the required transfer can be done in 2
scatter gather segments.

MFC after:	1 week
2005-01-03 08:09:05 +00:00
Warner Losh
24ea6505cb First pass at shortening names. Likely more can be done. Generally
prefer ethernet and serial to \1 adapter.
2004-12-31 19:10:33 +00:00
Warner Losh
edfffcdb9a Eliminate the redundant/verbose portion of the company names.
Generally omit semiconductor, electronics, inc, corp, pny, ltd and the
like.

This saves almost 3k for the usb module.
2004-12-31 18:59:38 +00:00
Warner Losh
61522a4654 Finish merging usb vendors from NetBSD. 2004-12-31 18:37:49 +00:00
Julian Elischer
3331831fd8 Don't call ugen_destroy_devnodes(). it is called from ugen_set_config()
which is the very next line.

Submitted by:	stefanf
MFC after: 3 days
2004-12-29 21:36:43 +00:00
Warner Losh
7fcb3efbe0 Move WINBOND 4 port hub to its proper location in the file. It belongs
in a section of its own, not arbitrarily grouped in the hawking section
just because hawking sells it...
2004-12-29 06:21:41 +00:00
David E. O'Brien
51799eec6c Add the Winbond made Hawking UH104 4-port hub.
Add a note where to find the offical USB assigned numbers.
2004-12-29 02:09:19 +00:00
Julian Elischer
2f37e02978 Rewrite ehci_abort_xfer() to use the method hinted at in the EHCI spec.
to remove a transaction from the async schedule. The previous method didn't
work well and led to the hardware writing to free'd buffers etc, as
it didn't always know that the transaction had been aborted.

Written after consultation with David Brownell who wrote the Linux
EHCI driver.

As part of this give the sqh structure a "previous" pointer.

MFC after:	1 week
2004-12-29 01:21:18 +00:00
John Birrell
4f2a7ca189 Pass an explicit pointer to the bus structure in the 'usb' device ivar
rather than a softc pointer (with the bus structure at the start).

This is a non-functional change. It just helps when reading the code to
know that the ehci, ohci and uhci drivers share the bus structure, not the
entire softc.
2004-12-28 22:17:10 +00:00
Warner Losh
b2e1ce3c5f Remove duplicate CHPRODUCTS entry.
Use tab religiously in the vendor section.
2004-12-27 06:58:05 +00:00
Warner Losh
255bc0be62 More minor diff reduction against netbsd:
ADVANCELOGIC->AVANCELOGIC (nothing in the tree uses it, so safe to do)
sort HAGIWARA vendor entry
sort ACTIONTAR vendor entry
Minor change to SYSTEMTALKS vendor entry.
2004-12-26 07:48:46 +00:00