Commit Graph

1056 Commits

Author SHA1 Message Date
Robert Watson
a93fa8f2bb For each architecture, define CACHE_LINE_SHIFT and a derived
CACHE_LINE_SIZE constant.  These constants are intended to
over-estimate the cache line size, and be used at compile-time
when a run-time tuning alternative isn't appropriate or
available.

Defaults for all architectures are 64 bytes, except powerpc
where it is 128 bytes (used on G5 systems).

MFC after:	2 weeks
Discussed on:   arch@
2009-04-19 20:19:13 +00:00
Bernd Walter
69948a10db minor cleanup 2009-04-17 22:45:57 +00:00
John Baldwin
842f11bef6 Restore bus DMA bounce pages to an offset of 0 when they are released by
a tag that has BUS_DMA_KEEP_PG_OFFSET set.  Otherwise the page could be
reused with a non-zero offset by a tag that doesn't have
BUS_DMA_KEEP_PG_OFFSET leading to data corruption.

Sleuthing by:	avg
Reviewed by:	scottl
2009-04-17 13:22:18 +00:00
Rafal Jaworowski
a669cbb228 Minor style fixes and better comments. 2009-04-16 11:21:52 +00:00
Rafal Jaworowski
bc26e2e38f Adjust Marvell Discovery (MV78xxx) support to recognize newest chip revisions,
handle Z0 revision (early silicon) explicitly due to its quirks.

Obtained from:	Marvell, Semihalf
2009-04-16 11:20:18 +00:00
Konstantin Belousov
3feb57a0a8 The bus_dmamap_load_uio(9) shall use pmap of the thread recorded in the
uio_td to extract pages from, instead of unconditionally use kernel
pmap.

Submitted by:	Jason Harmening <jason.harmening gmail com> (amd64 version)
PR:	amd64/133592
Reviewed by:	scottl (original patch), jhb
MFC after:	2 weeks
2009-04-13 19:20:32 +00:00
Rafal Jaworowski
95c5550c37 Minor description fix. 2009-04-08 13:01:18 +00:00
Rafal Jaworowski
991d55bfab Properly handle KDB entry in fatal abort. This lets KDB_UNATTENDED work on ARM.
Submitted by:	Grzegorz Bernacki gjb ! semihalf dot com
2009-04-08 12:54:32 +00:00
Andrew Thompson
65fd114d53 MFp4 //depot/projects/usb@159992
at91_udp.c does not exist anymore, it is now replaced by at91dci in
src/sys/dev/usb/controller. Also remove the ohci_atmelarm.c because it is also
included in src/sys/conf/files

Submitted by:	Sylvestre Gallon
2009-04-05 18:21:40 +00:00
Dmitry Chagin
cd899aad76 Fix KBI breakage by r190520 which affects older linux.ko binaries:
1) Move the new field (brand_note) to the end of the Brandinfo structure.
2) Add a new flag BI_BRAND_NOTE that indicates that the brand_note pointer
   is valid.
3) Use the brand_note field if the flag BI_BRAND_NOTE is set and as old
   modules won't have the flag set, so the new field brand_note would be
   ignored.

Suggested by:	jhb
Reviewed by:	jhb
Approved by:	kib (mentor)
MFC after:	6 days
2009-04-05 09:27:19 +00:00
Alan Cox
beb3c3a9c5 Retire VM_PROT_READ_IS_EXEC. It was intended to be a micro-optimization,
but I see no benefit from it today.

VM_PROT_READ_IS_EXEC was only intended for use on processors that do not
distinguish between read and execute permission.  On an mmap(2) or
mprotect(2), it automatically added execute permission if the caller
specified permissions included read permission.  The hope was that this
would reduce the number of vm map entries needed to implement an address
space because there would be fewer neighboring vm map entries that differed
only in the presence or absence of VM_PROT_EXECUTE.  (See vm/vm_mmap.c
revision 1.56.)

Today, I don't see any real applications that benefit from
VM_PROT_READ_IS_EXEC.  In any case, vm map entries are now organized
as a self-adjusting binary search tree instead of an ordered list.  So,
the need for coalescing vm map entries is not as great as it once was.
2009-04-04 23:12:14 +00:00
Olivier Houchard
a471e1eda3 Fix the userland, RAS, version of atomic_fetchadd_32 :
return the correct value, and do not store the wrong one in the supplied
pointer.

Submitted by:	Mark Tinguely <tinguely casselton net>
2009-03-31 23:47:18 +00:00
Olivier Houchard
8ba46ea415 Use Oxf0000000 instead of 0xff000000 to guess the physical address, relative
to the virtual one. I may had a reason at some point to use the later, but
can't remember which, and it can leads to issues.

Reported by:	Guillaume Ballet <gballet gmail com>
2009-03-31 23:06:20 +00:00
Sam Leffler
f8ee854304 revert unintended change 2009-03-30 21:54:39 +00:00
Sam Leffler
339ccfb391 Hoist 802.11 encapsulation up into net80211:
o call ieee80211_encap in ieee80211_start so frames passed down to drivers
  are already encapsulated
o remove ieee80211_encap calls in drivers
o fixup wi so it recreates the 802.3 head it requires from the 802.11
  header contents
o move fast-frame aggregation from ath to net80211 (conditional on
  IEEE80211_SUPPORT_SUPERG):
  - aggregation is now done in ieee80211_start; it is enabled when the
    packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames
    are held on a staging queue according to ieee80211_ffagemax
    (net.wlan.ffagemax) to wait for a frame to combine with
  - drivers must call back to age/flush the staging queue (ath does this
    on tx done, at swba, and on rx according to the state of the tx queues
    and/or the contents of the staging queue)
  - remove fast-frame-related data structures from ath
  - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle
    per-node fast-frames state (we reuse 11n tx ampdu state)
o change ieee80211_encap calling convention to include an explicit vap
  so frames coming through a WDS vap are recognized w/o setting M_WDS

With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames.

Reviewed by:	thompsa, rpaulo, avatar, imp, sephe
2009-03-30 21:53:27 +00:00
Sam Leffler
584f7327f1 Remove ATH_SUPPORT_TDMA and use IEEE80211_SUPPORT_TDMA instead. It
doesn't make much sense to configure driver support w/o net80211.
Note this means ath now depends on opt_wlan.h.
2009-03-30 19:23:49 +00:00
Andrew Thompson
2b78d30630 Remove the uscanner(4) driver, this follows the removal of the kernel scanner
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).

Reviewed by:	HPS
2009-03-19 20:33:26 +00:00
Konstantin Belousov
a4f2b2b0c6 Add AT_EXECPATH ELF auxinfo entry type. The value's a_ptr is a pointer
to the full path of the image that is being executed.
Increase AT_COUNT.

Remove no longer true comment about types used in Linux ELF binaries,
listed types contain FreeBSD-specific entries.

Reviewed by:	kan
2009-03-17 12:50:16 +00:00
Dmitry Chagin
32c01de21c Implement new way of branding ELF binaries by looking to a
".note.ABI-tag" section.

The search order of a brand is changed, now first of all the
".note.ABI-tag" is looked through.

Move code which fetch osreldate for ELF binary to check_note() handler.

PR:		118473
Approved by:	kib (mentor)
2009-03-13 16:40:51 +00:00
Sam Leffler
b993cf2e76 switch to !legacy usb stack 2009-03-11 00:12:45 +00:00
Sam Leffler
316065cda9 configure flash support 2009-03-10 21:49:51 +00:00
Sam Leffler
0ad2baa062 add IXP4XX_FLASH_SIZE config knob that can be used to override the default
flash size; this is necessary at the moment because we map all of flash at
boot, eventually we'll do this on the fly
2009-03-10 21:49:22 +00:00
Sam Leffler
5f5fc09df0 map CS0 on 2358 so flash is accessible 2009-03-10 21:47:17 +00:00
Sam Leffler
94ca1b2f84 mark device capable of vlan-size frames
Obtained from:	netbsd
2009-03-10 19:35:37 +00:00
Sam Leffler
d8a293c142 turn off inclusion of FCS in rx'd frames; we don't use it anywhere and
dhclient gets annoyed when it receives FCS in frames via bpf
2009-03-10 19:18:11 +00:00
Sam Leffler
f737e9ca11 o add missing bus_release_resource and bus_deactivate_resource that just
operate on the resource (we have no local resources to manage); this
  fixes drivers that alloc/release resources in their probe method and
  then do it again in attach
o while here add some prints to catch failures and massage style a bit
2009-03-10 19:15:35 +00:00
Sam Leffler
3ace201be8 bring in ddb "show gpio" support from Cambria branch 2009-03-10 17:19:45 +00:00
Sam Leffler
f060939f44 Small cleanup of memory resource allocation from Cambria branch:
o encode need for A4 bus space tag hackery according to the memory
  address; checking for "uart" breaks down with the GPS chip support
  which is also a uart but does not require the same hackery
o encode the correct memory window instead of carving up all of i/o
  space, potentially with a larger window than a device should have;
  this likely should be handled in the drivers by using a proper bus
  alloc call but since some drivers depend on the bus support to figure
  this out we cannot simply mod them
o add optional GPS and RS485 support (conditionally as the support
  isn't ready yet)
2009-03-10 17:16:16 +00:00
Sam Leffler
5ee23799eb catch up with r189306; handle delayed activation of resources
Submitted by:	jhb
2009-03-10 16:42:49 +00:00
Sam Leffler
215c1391c4 add cfid and geom_redboot 2009-03-09 23:25:34 +00:00
Sam Leffler
ecb89c8d8d o mark unexpected callbacks more clearly
o unwrap some lines
2009-03-08 23:45:56 +00:00
Sam Leffler
a3ae8e385c Cleanup virtual device mapping some more:
o improves understandability by replacing numerous relative address
  calculations with fixed addresses; everything should now match up
  more easily with the vm layout shown at the top of the file
o move the expansion bus chip select regions to be contiguous with
  the expansion bus configuration area; this is not exploited right
  now but allows map consolidation in the future
o leave a gap between the expansion bus regions and the pci config
  space in case we want to map more exp bus cs regions

Reviewed by:	imp, thompsa
2009-03-06 23:32:45 +00:00
Sam Leffler
42ca1e2bb5 remove unneeded static mappings for NPE and MAC regions; these are
already mapped through the IO region so never used

Reviewed by:	imp, thompsa
2009-03-06 23:29:00 +00:00
Sam Leffler
83f5c9db4f enable tdma support by default; many people using these boards
are using them to setup tdma p2p links
2009-03-06 23:27:47 +00:00
Sam Leffler
d134fd67f7 legacy USB is required on these platforms at the moment 2009-03-06 23:26:50 +00:00
Sam Leffler
7ba693d32a fix legacy usb configuration 2009-03-06 23:22:09 +00:00
Sam Leffler
b540204c15 o simplify code in ixppcib_conf_setup
o fixup debug printfs
2009-03-06 20:40:09 +00:00
Warner Losh
d03c67b198 Move to new usb stack that puts the front-end bus attachments with the
usb stack rather than with the rest of the processor support code.
Not sure that's a good idea, as we were moving away from it, but this
fixes the build in the mean time so we can have that discussion.
2009-02-27 23:12:28 +00:00
Andrew Thompson
3d3e0b40b1 Update paths for ehci_ixp4xx.c in the old and new stacks. 2009-02-24 23:34:02 +00:00
Andrew Thompson
68e3d00d68 Fix path and config name for ehci_mbus.c 2009-02-24 23:30:52 +00:00
Andrew Thompson
c89d41e5ff Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
Sam Leffler
f9e1a7df13 use mii instead of miibus so we don't drag in all phy support
(we only need ukphy which is brought in by mii)

MFC after:	1 week
2009-02-18 01:37:57 +00:00
Marcel Moolenaar
78c0a9c9e2 Include Marvell EHCI HC driver for USB2. 2009-02-16 21:42:41 +00:00
Olivier Houchard
0d657eecf3 Oops. ARM_RAS_END is ARM_TP_ADDRESS + 8, not 4.
Spotted out by:	Mark Tinguely <tinguely at casselton d0t net>
2009-02-13 16:00:19 +00:00
Olivier Houchard
a43268a746 To prevent various race conditions in the RAS code, store and restore the
values in ARM_RAS_START and ARM_RAS_END at context switch time.

MFC after:	1 week
2009-02-12 23:23:30 +00:00
Olivier Houchard
b2e1580e4d Do not set thread0.td_frame to a bogus value, as it's going to overwrite the
thread0 pcb, while the board-dependant code already set a good trapframe.

Reported by:	Mark Tinguely <tinguely at casselton d0t net>

MFC after:	1 week
2009-02-12 22:55:39 +00:00
Sam Leffler
9f5967652f fix ARM_USE_SMALL_ALLOC after memory layout changes
Submitted by:	cognet
2009-02-11 22:34:50 +00:00
Olivier Houchard
96c7367b9e The bounce zone sees its page number increased if multiple dma maps use it in
the same dma tag. However, it can happen multiple dma tags share the same
bounce zone too, so add a per-bounce zone map counter, and check it instead of
the dma tag map counter, to know if we have to alloc more pages.

Reported by:	miwi
Reviewed by:	scottl
2009-02-09 18:03:31 +00:00
Warner Losh
047e5fdabc When bouncing pages, allow a new option to preserve the intra-page
offset.  This is needed for the ehci hardware buffer rings that assume
this behavior.

This is an interim solution, and a more general one is being worked
on.  This solution doesn't break anything that doesn't ask for it
directly.  The mbuf and uio variants with this flag likely don't work
and haven't been tested.

Universe builds with these changes.  I don't have a huge-memory
machine to test these changes with, but will be happy to work with
folks that do and hps if this changes turns out not to be sufficient.

Submitted by:	alfred@ from Hans Peter Selasky's original
2009-02-08 22:54:58 +00:00
Olivier Houchard
1645994be5 Erm... Report the buffer as being bounced even when it's the entire buffer,
or we would end up invalidating the cache line for what we just copied...

Reported by:	thompsa
Pointy at to:	cognet

MFC after:	3 days
2009-02-04 01:14:06 +00:00