ip_forward, TCP/IPv6, and probably SCTP leaked references to L2 cache
entry because they used their own routes on the stack, not in_pcb routes.
The original model for route caching was callers that provided a route
structure to ip{,6}input() would keep the route, and this model was used
for L2 caching as well. Instead, change L2 caching to be done by default
only when using a route structure in the in_pcb; the pcb deallocation
code frees L2 as well as L3 cacches. A separate change will add route
caching to TCP/IPv6.
Another suggestion was to have the transport protocols indicate willingness
to use L2 caching, but this approach keeps the changes in the network
level
Reviewed by: ae gnn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10059
As noted in the comment, nothing special needs to be done to destroy
the unneeded context after the allocation race, but the context memory
itself still should to be freed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It does not make sense since identity mapping already provides the
required mapping for RMRR ranges. More, since identity page tables do
not reflect content of map entries for id domains, creating RMRR
entries makes domain data inconsistent.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This can significantly reduce scan duration thus saving time and power.
EBS failure reported by FW disables EBS for current connection. It is
re-enabled upon new connection attempt on any WLAN interface.
Obtained from: dragonflybsd.git 89f579e9823a5c446ca172cf82bbc210d6a054a4
If this is the last running vap wait until device will be powered off
(fixes panic when 'ifconfig wlan0 destroy' is executed for running iwn(4)
interface).
Tested with:
- Intel 6205, STA mode.
- RTL8188EU, STA / IBSS modes.
- RTL8821AU, STA / HOSTAP modes.
Long ago, perhaps only on i386, kernel text was mapped read-only and
it was necessary to change the mapping to read-write to set breakpoints
in kernel text. Other writes by ddb to kernel text were also allowed.
This write protection is harder to implement with 4MB pages, and was
lost even for 4K pages when 4MB pages were implemented. So changing
the mapping became useless. It was actually worse than useless since
it followed followed various null and otherwise garbage pointers to
not change random memory instead of the mapping. (On i386s, the
pointers became good in pmap_bootstrap(), and on amd64 the pointers
became bad in pmap_bootstrap() if not before.)
Another bug broke detection of following of null pointers on i386,
except early in boot where not detecting this was a feature. When
I fixed the bug, I accidentally broke the feature and soon got traps
in db_write_bytes(). Setting breakpoints early in ddb was broken.
kib pointed out that a clean way to do the adjustment would be to use
a special [sub]map giving a small window on the bytes to be written.
The trap handler didn't know how to fix up errors for pagefaults
accessing the map itself. Such errors rarely need fixups, since most
traps for the map are for the first access which is a read.
Reviewed by: kib
crash when the file shrinks. This also fixes sendfile(2) not sending more
data in a case when the file grows, and the request is open-ended or
specifies a size that is greater than old file size.
PR: 217789
Reviewed by: gallatin
MFC after: 10 days
- in mcontext_t, rename newer used 'union __vfp' to equaly sized 'mc_spare'.
Space allocated by 'union __vfp' is too small and cannot hold full
VFP context.
- move structures defined in fp.h to more appropriate headers.
- remove all unused VFP structures.
MFC after: 2 weeks
illumos/illumos-gate@8363e80ae7https://github.com/illumos/illumos-gate/commit/8363e80ae72609660f6090766ca8c2c18https://www.illumos.org/issues/7303
This change introduces a new weighting algorithm to improve metaslab selection.
The new weighting algorithm relies on the SPACEMAP_HISTOGRAM feature. As a result,
the metaslab weight now encodes the type of weighting algorithm used
(size-based vs segment-based).
This also introduce a new allocation tracing facility and two new dcmds to help
debug allocation problems. Each zio now contains a zio_alloc_list_t structure
that is populated as the zio goes through the allocations stage. Here's an
example of how to use the tracing facility:
> c5ec000::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 NOT_ALLOCATABLE ztest.0a
- 0 400 0 ENOSPC ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 NOT_ALLOCATABLE ztest.0a
- 0 200 0 ENOSPC ztest.0a
1 0 400 1 x 8M 17b1a00 ztest.0a
> 1ff2400::print zio_t io_alloc_list | ::walk list | ::metaslab_trace
MSID DVA ASIZE WEIGHT RESULT VDEV
- 0 200 0 NOT_ALLOCATABLE mirror-2
- 0 200 0 NOT_ALLOCATABLE mirror-0
1 0 200 1 x 4M 112ae00 mirror-1
- 1 200 0 NOT_ALLOCATABLE mirror-2
- 1 200 0 NOT_ALLOCATABLE mirror-0
1 1 200 1 x 4M 112b000 mirror-1
- 2 200 0 NOT_ALLOCATABLE mirror-2
If the metaslab is using segment-based weighting then the WEIGHT column will
display the number of segments available in the bucket where the allocation
attempt was made.
Author: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
I got a report of this source file not building on Raspberry Pi. It's
interesting that this only fails for that target and not for others.
Again, that's no reason not to include the right headers.
PR: 217969
Reported by: Johannes Jost Meixner
MFC after: 1 week
Add support for early boot access to NVRAM variables, using a new
bhnd_nvram_data_getvar_direct() API to support zero-allocation direct
reading of NVRAM variables from a bhnd_nvram_io instance backed by the
CFE NVRAM device.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D9913
The existing ELF image activator requires the brandinfo to provide such
a string unconditionally, even if the executable format in question
doesn't use this type of branding. Skip matching when it's a null
pointer.
Reviewed by: kib
MFC after: 2 weeks
r315083 essentially reverted r263954 which was made for a good reason,
but didn't take into account AACRAID_DEBUG.
Now both types of build should be clean.
MFC after: 5 days
No MFC to: stable/10
I think this message is not very useful for end user. Also its formatting
does not match other messages printed at that time. Those who really need
this information can always find it in `camcontrol negotiate daX -v`.
MFC after: 2 weeks
This way we can avoid blocking the whole queue in the low memory
situations. It's better to sacrifice some I/O performance by not doing
the aggregation than to add an indefinite wait for more memory.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9999
This is done so that the thread state changes during the switch
are not confused with the thread state changes reported when the thread
spins on a lock.
Here is an example, three consecutive entries for the same thread (from top to
bottom):
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"sleep", attributes: prio:84, wmesg:"-", lockname:"(null)"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"spinning", attributes: lockname:"sched lock 1"
KTRGRAPH group:"thread", id:"zio_write_intr_3 tid 100260", state:"running", attributes: none
The above trace could leave an impression that the final state of
the thread was "running".
After this change the sleep state will be reported after the "spinning"
and "running" states reported for the sched lock.
Reviewed by: jhb, markj
MFC after: 1 week
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D9961
Newbus handles multiple equally named device classes without problems,
so there is no reason to use slightly cryptic "<foo>_shdci" for them.
In contrast, the driver module name must be unique, so "<foo>_shdci"
is the right name for it.
