Commit Graph

44 Commits

Author SHA1 Message Date
Gleb Smirnoff
6c3e93cb5a Use NET_TASK_INIT() and NET_GROUPTASK_INIT() for drivers that process
incoming packets in taskqueue context.

Reviewed by:	hselasky
Differential Revision:	https://reviews.freebsd.org/D23518
2020-02-11 18:57:07 +00:00
Gleb Smirnoff
16650a016c Convert to if_foreach_llmaddr() KPI. 2019-10-21 18:06:09 +00:00
Warner Losh
329e817fcc Reapply, with minor tweaks, r338025, from the original commit:
Remove unused and easy to misuse PNP macro parameter

Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
2018-09-26 17:12:14 +00:00
Conrad Meyer
b8e771e97a Back out r338035 until Warner is finished churning GSoC PNP patches
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.

It's easy to apply/reapply when churn dies down.
2018-08-19 00:46:22 +00:00
Conrad Meyer
faa319436f Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
2018-08-19 00:22:21 +00:00
Warner Losh
ef50201a2e Add PNP info to PCI attachment of ale driver
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
2018-06-13 20:25:23 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
Pyun YongHyeon
9dda5c8ffc Fix variable assignment.
Found by:	PVS-Studio
2016-02-18 01:24:10 +00:00
Pyun YongHyeon
0999f75a2f Fix a long standing bug in MAC statistics register access. One
additional register was erroneously added in the MAC register set
such that 7 TX statistics counters were wrong.
2014-10-08 01:03:32 +00:00
Gleb Smirnoff
499986541b Mechanically convert to if_inc_counter(). 2014-09-18 21:13:12 +00:00
Gleb Smirnoff
1bffa9511f Use define from if_var.h to access a field inside struct if_data,
that resides in struct ifnet.

Sponsored by:	Nginx, Inc.
2014-08-30 19:55:54 +00:00
John Baldwin
068d8643ad Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
Pyun YongHyeon
52ee8ac027 Increase the number of TX DMA segments from 32 to 35. It turned
out 32 is not enough to support a full sized TSO packet.
While I'm here fix a long standing bug introduced in r169632 in
bce(4) where it didn't include L2 header length of TSO packet in
the maximum DMA segment size calculation.

In collaboration with:	rmacklem
MFC after:		2 weeks
2014-03-31 01:54:59 +00:00
Pyun YongHyeon
2c6d18ebc3 m_defrag(9) does not touch original mbuf chain when it can't
allocate new mbuf.  Free original mbuf chain when driver is not
able to send the packet.
2014-01-08 01:06:32 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Pyun YongHyeon
9f988ef16b Make sure to stop both TX and RX MACs in ale_stop_mac(). Previously
it used to stop TX MAC only such that MAC reconfiguration after
getting a link didn't work as expected.

PR:	kern/173652
2012-12-17 06:01:57 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Dimitry Andric
29658c96ce Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not).  Most of these are of the form:

static const struct bzzt_type {
	[...list of members...]
} const bzzt_devs[] = {
	[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by:	yongari, marius
MFC after:	1 week
2012-11-05 19:16:27 +00:00
Pyun YongHyeon
9dd3fa374a Fix typo. Check against number of allocated MSI-X vectors.
There is no ale(4) controller that supports MSI-X so this is not
real issue.

PR:	kern/171825
2012-10-08 07:01:07 +00:00
Marius Strobl
26a93551be - Const'ify the device lookup-table.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Enable support for flow control.
  Tested by: yongari

MFC after:	1 week
2012-04-04 21:09:02 +00:00
Pyun YongHyeon
fd3d448fa8 Do not report current link status if driver is not running.
This change also workarounds dhclient's link state handling bug by
not giving current link status.

Unlike other controllers, ale(4)'s PHY hibernation perfectly works
such that driver does not see a valid link if the controller is not
brought up.  If dhclient(8) runs on ale(4) it will blindly waits
until link UP and then gives up after 10 seconds.  Because
dhclient(8) still thinks interface got a valid link when IFM_AVALID
is not set for selected media,  this change makes dhclient initiate
DHCP without waiting for link UP.
2012-03-30 05:27:05 +00:00
Pyun YongHyeon
2b6f7122ab Remove task queue based link state change handler. Driver no longer
needs to defer link state handling.
While I'm here, mark IFF_DRV_RUNNING before changing media.  If
link is established without any delay, that link state change
handling could be lost.
2012-03-30 04:46:39 +00:00
Pyun YongHyeon
57c81d92ae Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
Pyun YongHyeon
83ad330dd5 Fix typo.
Submitted by:	brad at OpenBSD
2011-05-19 23:13:08 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
John Baldwin
287e0d97bf Fix some bugs in my last set of changes to ale(4):
- Remove extra unlock from end of ale_start_locked().
- Expand scope of locking in interrupt handler.
- Move ether_ifdetach() earlier and retire now-unneeded DETACH flag.

Tested by:	Aryeh Friedman
Reviewed by:	yongari (earlier version)
2011-01-18 16:27:40 +00:00
Matthew D Fleming
6dc7dc9a3e sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
Commit the rest of the devices.
2011-01-12 19:53:56 +00:00
John Baldwin
32341ad63c Add a 'locked' variant of the foo_start() routine and call it directly
from interrupt handlers and watchdog routines instead of queueing a task
to call foo_start().

Reviewed by:	yongari
MFC after:	1 month
2011-01-03 18:28:30 +00:00
Pyun YongHyeon
e23559db8e Remove unecessary and clearly wrong usage of atomic(9).
Reported by:  avg
2010-12-14 17:39:10 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Pyun YongHyeon
96486faa6e Make sure to not use stale ip/tcp header pointers. The ip/tcp
header parser uses m_pullup(9) to get access to mbuf chain.
m_pullup(9) can allocate new mbuf chain and free old one if the
space left in the mbuf chain is not enough to hold requested
contiguous bytes. Previously drivers can use stale ip/tcp header
pointer if m_pullup(9) returned new mbuf chain.

Reported by:	Andrew Boyer (aboyer <> averesystems dot com)
MFC after:	10 days
2010-10-14 18:31:40 +00:00
Pyun YongHyeon
4c7421aadb It seems ale(4) controllers do not like to see TCP payload in the
first descriptor in TSO case. Otherwise controller can generate bad
frames during TSO. To address it, make sure to pull up ethernet +
IP + TCP header with options in first buffer. Also ensure the
buffer length of the first descriptor for TSO covers entire ethernet
+ IP + TCP with options and setup additional Tx descriptor if the
first buffer includes TCP payload.

Tested by:	Amar Takhar <verm <> darkbeer dot org >
MFC after:	1 week
2010-04-26 21:08:15 +00:00
Pyun YongHyeon
6da6d0a9e3 With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
drivers to take into account for the change. Basically CSUM_TSO
should be checked before checking CSUM_TCP.
2010-04-19 22:10:40 +00:00
Pyun YongHyeon
5b8b73f675 Add TSO support on VLANs. While I'm here remove unnecessary check
of VLAN hardware checksum offloading. vlan(4) already takes care of
this.
2010-02-26 22:46:36 +00:00
Pyun YongHyeon
cb2cdeceb5 Fix multicast handling. All Atheros controllers use big-endian form
in computing multicast hash.

PR:	kern/139137
2009-09-29 23:03:16 +00:00
Pyun YongHyeon
ca406a44de Disable Rx checksum offload until I find more clue why it breaks
under certain environments. However give users chance to override
it when he/she surely knows his/her hardware works with Rx checksum
offload.

Reported by:	Ulrich Spoerlein ( uqs <> spoerlein dot net )
MFC after:	1 week
Approved by:	re (kensmith)
2009-06-29 05:12:21 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Pyun YongHyeon
59f72548f6 Now pci(4) handles PCIM_CMD_INTxDIS so there is no need to poke
this bit in driver.
2009-03-05 00:04:32 +00:00
Pyun YongHyeon
1ce1618851 AR8113 also need to set DMA read burst value. This should fix
occasional DMA read error seen on AR8113.

Submitted by:	Jie Yang < Jie.Yang <> Atheros com >
2008-12-03 09:01:12 +00:00
Pyun YongHyeon
19042fb8c7 Add some PHY magic to enable PHY hibernation and 1000baseT/10baseT
power adjustment. This change is required to guarantee correct
operation on certain switches.

Submitted by:	Jie Yang < Jie.Yang <> Atheros com >
2008-12-03 08:56:01 +00:00
Pyun YongHyeon
3c6e15bcee Add ale(4), a driver for Atheros AR8121/AR8113/AR8114 PCIe ethernet
controller. The controller is also known as L1E(AR8121) and
L2E(AR8113/AR8114). Unlike its predecessor Attansic L1,
AR8121/AR8113/AR8114 uses completely different Rx logic such that
it requires separate driver. Datasheet for AR81xx is not available
to open source driver writers but it shares large part of Tx and
PHY logic of L1. I still don't understand some part of register
meaning and some MAC statistics counters but the driver seems to
have no critical issues for performance and stability.

The AR81xx requires copy operation to pass received frames to upper
stack such that ale(4) consumes a lot of CPU cycles than that of
other controller. A couple of silicon bugs also adds more CPU
cycles to address the known hardware bug. However, if you have fast
CPU you can still saturate the link.
Currently ale(4) supports the following hardware features.
  - MSI.
  - TCP Segmentation offload.
  - Hardware VLAN tag insertion/stripping with checksum offload.
  - Tx TCP/UDP checksum offload and Rx IP/TCP/UDP checksum offload.
  - Tx/Rx interrupt moderation.
  - Hardware statistics counters.
  - Jumbo frame.
  - WOL.

AR81xx PCIe ethernet controllers are mainly found on ASUS EeePC or
P5Q series of ASUS motherboards. Special thanks to Jeremy Chadwick
who sent the hardware to me. Without his donation writing a driver
for AR81xx would never have been possible. Big thanks to all people
who reported feedback or tested patches.

HW donated by:	koitsu
Tested by:	bsam, Joao Barros <joao.barros <> gmail DOT com >
		Jan Henrik Sylvester <me <> janh DOT de >
		Ivan Brawley < ivan <> brawley DOT id DOT au >,
		CURRENT ML
2008-11-12 09:52:06 +00:00