future:
rename ttyopen() -> tty_open() and ttyclose() -> tty_close().
We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
line as the announcement. Someone should probably update the "buffers
remaining" message since we now no longer should have any buffers remaining
at that point.
Until now the function has just returned zero for any event, but
that is downright wrong for MOD_UNLOAD and not very useful for any
future events we add where it may be crucial to be able to tell
if the event was unhandled or successful.
Change the function to return as follows:
MOD_LOAD -> 0
MOD_UNLOAD -> EBUSY
anything else -> EOPNOTSUPP
check to ensure that the caller is not prison root.
The intention is to fix file descriptor creation so that
prison root can not use the last remaining file descriptors.
This privilege should be reserved for non-jailed root users.
Approved by: bmilekic (mentor)
sched_add() rather than just doing it in sched_wakeup(). The old
ithread preemption code used to set NEEDRESCHED unconditionally if it
didn't preempt which masked this bug in SCHED_4BSD.
Noticed by: jake
Reported by: kensmith, marcel
Add a MOD_QUIESCE event for modules. This should return error (EBUSY)
of the module is in use.
MOD_UNLOAD should now only fail if it is impossible (as opposed to
inconvenient) to unload the module. Valid reasons are memory references
into the module which cannot be tracked down and eliminated.
When kldunloading, we abandon if MOD_UNLOAD fails, and if -force is
not given, MOD_QUIESCE failing will also prevent the unload.
For backwards compatibility, we treat EOPNOTSUPP from MOD_QUIESCE as
success.
Document that modules should return EOPNOTSUPP for unknown events.
1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel
thread current user thread is running on. Add tm_dflags into
kse_thr_mailbox, the flags is written by debugger, it tells
UTS and kernel what should be done when the process is being
debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER.
TMDF_SSTEP is used to tell kernel to turn on single stepping,
or turn off if it is not set.
TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall
whenever possible, to UTS, it means do not run the user thread
until debugger clears it, this behaviour is necessary because
gdb wants to resume only one thread when the thread's pc is
at a breakpoint, and thread needs to go forward, in order to
avoid other threads sneak pass the breakpoints, it needs to remove
breakpoint, only wants one thread to go. Also, add km_lwp to
kse_mailbox, the lwp id is copied to kse_thr_mailbox at context
switch time when process is not being debugged, so when process
is attached, debugger can map kernel thread to user thread.
2. Add p_xthread to proc strcuture and td_xsig to thread structure.
p_xthread is used by a thread when it wants to report event
to debugger, every thread can set the pointer, especially, when
it is used in ptracestop, it is the last thread reporting event
will win the race. Every thread has a td_xsig to exchange signal
with debugger, thread uses TDF_XSIG flag to indicate it is reporting
signal to debugger, if the flag is not cleared, thread will keep
retrying until it is cleared by debugger, p_xthread may be
used by debugger to indicate CURRENT thread. The p_xstat is still
in proc structure to keep wait() to work, in future, we may
just use td_xsig.
3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend
a thread. When process stops, debugger can set the flag for
thread, thread will check the flag in thread_suspend_check,
enters a loop, unless it is cleared by debugger, process is
detached or process is existing. The flag is also checked in
ptracestop, so debugger can temporarily suspend a thread even
if the thread wants to exchange signal.
4. Current, in ptrace, we always resume all threads, but if a thread
has already a TDF_DBSUSPEND flag set by debugger, it won't run.
Encouraged by: marcel, julian, deischen
1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel
thread current user thread is running on. Add tm_dflags into
kse_thr_mailbox, the flags is written by debugger, it tells
UTS and kernel what should be done when the process is being
debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER.
TMDF_SSTEP is used to tell kernel to turn on single stepping,
or turn off if it is not set.
TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall
whenever possible, to UTS, it means do not run the user thread
until debugger clears it, this behaviour is necessary because
gdb wants to resume only one thread when the thread's pc is
at a breakpoint, and thread needs to go forward, in order to
avoid other threads sneak pass the breakpoints, it needs to remove
breakpoint, only wants one thread to go. Also, add km_lwp to
kse_mailbox, the lwp id is copied to kse_thr_mailbox at context
switch time when process is not being debugged, so when process
is attached, debugger can map kernel thread to user thread.
2. Add p_xthread to proc strcuture and td_xsig to thread structure.
p_xthread is used by a thread when it wants to report event
to debugger, every thread can set the pointer, especially, when
it is used in ptracestop, it is the last thread reporting event
will win the race. Every thread has a td_xsig to exchange signal
with debugger, thread uses TDF_XSIG flag to indicate it is reporting
signal to debugger, if the flag is not cleared, thread will keep
retrying until it is cleared by debugger, p_xthread may be
used by debugger to indicate CURRENT thread. The p_xstat is still
in proc structure to keep wait() to work, in future, we may
just use td_xsig.
3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend
a thread. When process stops, debugger can set the flag for
thread, thread will check the flag in thread_suspend_check,
enters a loop, unless it is cleared by debugger, process is
detached or process is existing. The flag is also checked in
ptracestop, so debugger can temporarily suspend a thread even
if the thread wants to exchange signal.
4. Current, in ptrace, we always resume all threads, but if a thread
has already a TDF_DBSUSPEND flag set by debugger, it won't run.
Encouraged by: marcel, julian, deischen
pmap_remove_pages(). (The implementation of pmap_remove_pages() is
optional. If pmap_remove_pages() is unimplemented, the acquisition and
release of the page queues lock is unnecessary.)
Remove spl calls from the alpha, arm, and ia64 pmap_remove_pages().
a better name. I have a kern_[sg]etsockopt which I plan to commit
shortly, but the arguments to these function will be quite different
from so_setsockopt.
Approved by: alfred
This is to allow filesystems to decide based on the passed thread
which vnode to return.
Several filesystems used curthread, they now use the passed thread.
will be used heavily in debugging KSE threads. This breaks libpthread
on IA64, but because libpthread was not in 5.2.1 release, I would like
to change it so we needn't to introduce another syscall.
tracing process to obtain information about the LWP that caused the
traced process to stop. Debuggers can use this information to select
the thread currently running on the LWP as the current thread.
The request has been made compatible with NetBSD for as much as
possible. This implementation differs from NetBSD in the following
ways:
1. The data argument is allowed to be smaller than the size of the
ptrace_lwpinfo structure known to the kernel, but not 0. This
is opposite to what NetBSD allows. The reason for this is that
we can extend the structure without affecting older binaries.
2. On NetBSD the tracing process is to set the pl_lwpid field to
the Id of the LWP it wants information of. We don't do that.
Our ptrace interface allows passing the LWP Id instead of the
PID. The tracing process is to set the PID to the LWP Id it
wants information of.
3. When the PID is actually the PID of the tracing process, this
request returns the information about the LWP that caused the
process to stop. This was the whole purpose of the request in
the first place.
When the traced process has exited, this request will return the
LWP Id 0, indicating that the process state is not the result of
an event specific to a LWP.
changing the backend from outside the KDB frontend. For example from
within a backend. Rewrite kdb_sysctl_current to make use of this
function as well.
in soreceive() after removing an MT_SONAME mbuf from the head of the
socket buffer.
When processing MT_CONTROL mbufs in soreceive(), first remove all of
the MT_CONTROL mbufs from the head of the socket buffer to a local
mbuf chain, then feed them into dom_externalize() as a set, which
both avoids thrashing the socket buffer lock when handling multiple
control mbufs, and also avoids races with other threads acting on
the socket buffer when the socket buffer mutex is released to enter
the externalize code. Existing races that might occur if the protocol
externalize method blocked during processing have also been closed.
Now that we synchronize socket buffer and stack state following
modifications to the socket buffer, turn the manual synchronization
that previously followed control mbuf processing with a set of
assertions. This can eventually be removed.
The soreceive() code is now substantially more MPSAFE.
the head of the mbuf chains in a socket buffer, re-synchronizes the
cache pointers used to optimize socket buffer appends. This will be
used by soreceive() before dropping socket buffer mutexes to make sure
a consistent version of the socket buffer is visible to other threads.
While here, update copyright to account for substantial rewrite of much
socket code required for fine-grained locking.
locking on 'nextrecord' and concerns regarding potentially inconsistent
or stale use of socket buffer or stack fields if they aren't carefully
synchronized whenever the socket buffer mutex is released. Document
that the high-level sblock() prevents races against other readers on
the socket.
Also document the 'type' logic as to how soreceive() guarantees that
it will only return one of normal data or inline out-of-band data.
name in the debug.kdb.current sysctl. All other dereferences are
properly guarded, but this one was overlooked.
Reported by: Morten Rodal (morten at rodal dot no)
associated with a PR_ADDR protocol, make sure to update the m_nextpkt
pointer of the new head mbuf on the chain to point to the next record.
Otherwise, when we release the socket buffer mutex, the socket buffer
mbuf chain may be in an inconsistent state.
o Make debugging code conditional upon KDB instead of DDB.
o s/WITNESS_DDB/WITNESS_KDB/g
o s/witness_ddb/witness_kdb/g
o Rename the debug.witness_ddb sysctl to debug.witness_kdb.
o Call kdb_backtrace() instead of backtrace().
o Call kdb_enter() instead Debugger().
o Assert kdb_active instead of db_active.
o Make debugging code conditional upon KDB instead of DDB.
o Call kdb_enter() instead of Debugger().
o Call kdb_backtrace() instead of db_print_backtrace() or backtrace().
kern_mutex.c:
o Replace checks for db_active with checks for kdb_active and make
them unconditional.
kern_shutdown.c:
o s/DDB_UNATTENDED/KDB_UNATTENDED/g
o s/DDB_TRACE/KDB_TRACE/g
o Save the TID of the thread doing the kernel dump so the debugger
knows which thread to select as the current when debugging the
kernel core file.
o Clear kdb_active instead of db_active and do so unconditionally.
o Remove backtrace() implementation.
kern_synch.c:
o Call kdb_reenter() instead of db_error().
in which multiple (presumably different) debugger backends can be
configured and which provides basic services to those backends.
Besides providing services to backends, it also serves as the single
point of contact for any and all code that wants to make use of the
debugger functions, such as entering the debugger or handling of the
alternate break sequence. For this purpose, the frontend has been
made non-optional.
All debugger requests are forwarded or handed over to the current
backend, if applicable. Selection of the current backend is done by
the debug.kdb.current sysctl. A list of configured backends can be
obtained with the debug.kdb.available sysctl. One can enter the
debugger by writing to the debug.kdb.enter sysctl.
Add copyiniov() which copies a struct iovec array in from userland into
a malloc'ed struct iovec. Caller frees.
Change uiofromiov() to malloc the uio (caller frees) and name it
copyinuio() which is more appropriate.
Add cloneuio() which returns a malloc'ed copy. Caller frees.
Use them throughout.
