Commit Graph

18540 Commits

Author SHA1 Message Date
Mark Newton
6e2972b825 Changes as suggested by bde
Submitted by:	bde
2000-01-07 14:41:12 +00:00
Søren Schmidt
39412a7ece This is not my lucky day :( 2000-01-07 13:15:42 +00:00
Søren Schmidt
af86437301 Guard against transfers of zero length given to *strategy. 2000-01-07 12:01:01 +00:00
Marcel Moolenaar
3abe5082ad Use genassym(1). The definitions of NKPDE and NKPT have been removed
because they are already defined in pmap.h, resulting in duplicate
definitions.

Reviewed by: bde
2000-01-07 11:50:46 +00:00
Luoqi Chen
5c8b298e0e Allow SMP && NCPU == 1 to work. From now on, there's no restriction on the
value of NCPU relative to the number of cpus physically present, the actual
number of cpus utilized will be the smaller of the two.
2000-01-07 08:49:25 +00:00
Luoqi Chen
5e95083920 Introduce a mechanism to suspend/resume system processes. Suspend syncer
and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
Søren Schmidt
e960abaf96 Set PIO mode in all cases. 2000-01-07 08:28:41 +00:00
Bill Fumerola
36a288c5b4 Fix paste-o in NeoMagic audio probe.
Submitted by:	cg
2000-01-07 06:59:10 +00:00
Peter Wemm
a942162d50 Revert back all the way to 1.11 - the problem was that Makefile.alpha was
out of sync.
2000-01-07 05:32:08 +00:00
Peter Wemm
31f723c7bc Bring the Alpha and x86 Makefiles closer together. 2000-01-07 05:12:12 +00:00
Mike Smith
f06f6736b0 Don't include <sys/systm.h>. It doesn't do anything, and with recent
changes it breaks building genassym.
2000-01-07 00:38:02 +00:00
Søren Schmidt
14c2c6c8b1 New ATAPI burner utility API, replaces the wormio API. 2000-01-06 22:50:02 +00:00
Søren Schmidt
191ba01f6a New ATAPI burner utility. Replaces wormcontrol. 2000-01-06 22:46:20 +00:00
Warner Losh
46121c1271 FDC_YE has been removed as a valid option.
Noticed by: bde
2000-01-06 16:45:56 +00:00
Peter Wemm
d5127a856d Missed s/KERNEL/_KERNEL/ here.. *blush*.
Submitted by:	bde
2000-01-06 13:14:51 +00:00
Bill Paul
032eb46fbb Cleanups: remove stale comments left over from when I cloned the ADMtek
driver, remove unused member of kue_chain struct also left over from
ADMtek driver.
2000-01-06 07:39:07 +00:00
Warner Losh
deae2aaf91 Checkpoint of today's changes. We now get to the point where the pccard
layer is trying to access the now unexistant chip functions.
o Added DEVPRINTF which is like DPRINTF only calls device_printf.
o Made it possible to define PCICDEBUG
o Remove ph_parent and use the softc pointer sc instead in pcic_handle.
o Remove all references to dv_xname
o Add some debug messages.
o enable MI attach/detach calling for pccard.
o convert pcic_chip_socket_{en,dis}able to pcic_{dis,en}able_socket
  and connect them to the power_{enable,disbale}_socket.
o Remove pccard pointer from pcic_softc.
o GC some unused pccard functions.
o Convert pccard_chip_socket* to POWER_ENABLE_SOCKET
o kill pccard_attach_args.
o power_if.m updates.  More to come.
2000-01-06 07:30:28 +00:00
Warner Losh
b2290df23b Add power_if.[cho] generation for new pccard system.
Also added commented out xe driver pending change.  Should be benign.
2000-01-06 07:18:05 +00:00
Warner Losh
3b1782065f Merge most of FDC_YE into the mainline driver.
o Rename FDC_PCMCIA to FDC_NODMA to allow systems that don't have dma
  for floppies.
o Remove all but two FDC_YE ifdefs.  They aren't needed.
o Move defines for YE_DATAPORT to fdreg.h.

Not fixed:
o The pccard probe/attach.  However, motivated individuals can more
  easily add this now.

This is a merge of changes I've had in my tree for a long time.  These
fixes were tested on my VAIO with its normal floppy.  Please let me
know if I broke anything.

Prodded by: Peter Wemm <peter@freebsd.org>
2000-01-06 07:13:54 +00:00
Cameron Grant
833f702348 allow mixer-only devices - ie, devices with no play/rec channels 2000-01-06 04:11:36 +00:00
Andrew Gallatin
081fb9623d implement OSF_GET_MAX_UPROCS portion of osf1_getsysinfo() for AT&T ksh 2000-01-06 02:37:45 +00:00
Andrew Gallatin
b5227c64c4 Shutup complaints about unimplemented SVR4 ioctls 2000-01-06 02:35:44 +00:00
Bill Paul
a7fffc4bc2 Update copyright date for Y2K (did the other files but forgot this one).
Also update comments to credit to Rob Furr with donating the adapter
that I used for testing. No code changes.
2000-01-05 23:38:07 +00:00
Greg Lehey
b51b6b8a7b Don't tsleep with PCATCH, it's a wonderful way to hang the system.
Reported-by:	Bernd Walter <ticso@cicely.de>
2000-01-05 22:59:36 +00:00
Greg Lehey
3bd2a0a10c Add missing header file.
Not-reported-by:	peter
2000-01-05 22:58:39 +00:00
Mark Newton
0e741a5b5b Add documentation for SVR4 options in LINT. 2000-01-05 21:41:16 +00:00
Mark Newton
d5b0df04b2 Unbreak LINT -- typedefs from signal.h are needed to make prototypes in
this file make sense.
2000-01-05 21:28:46 +00:00
Cameron Grant
bbb5bf3d69 don't panic if channel init fails, report and fail gracefully 2000-01-05 20:44:41 +00:00
Archie Cobbs
4c641908e9 Fix a few obscure memory leaks. 2000-01-05 20:36:07 +00:00
Peter Wemm
8cb96f20f8 Export the nselcoll counter via the kern.nselcoll sysctl so we can see
just how bad it gets in various situations.

Reminded by:  adrian
2000-01-05 19:40:17 +00:00
Bruce Evans
b9b652d2f6 Support filesystems with the not-so-new "filetype" feature. This
feature gives the d_type field for struct dirent.  We used to panic
in ext2_readdir() for filesystems with this feature.
2000-01-05 19:31:26 +00:00
Bill Paul
a40a664637 Correct the vendor ID for KLSI: it's actually 0x5e9. 0x3e8 is the
vendor ID for Aox Inc, which makes the controller engine and/or
firmware for the KLSI chip.
2000-01-05 18:25:53 +00:00
Peter Wemm
b9da888fcb Make the evil broken pnpbios compensation slightly less evil.
This is the hack that compensates for when bios vendors "forget" to
include the fdc control (0x3f7) port in their io port mappings.  Instead
of accessing ports outside of a range allocated to a handle, simply
allocate the port directly.  It even shows up in the probe..
2000-01-05 17:42:43 +00:00
Bill Paul
78126c2704 Doh. Forgot to add the entry for the 3Com 3c19250 to the supported
devices table.
2000-01-05 17:31:05 +00:00
Bill Paul
6998849dc4 Do not attempt to load the firmware a second time. If you reboot your
machine but leave your KLSI adapter plugged into your USB port, it
may stay powered on and retain its firmware in memory. Trying to load
the firmware again in this case will wedge the chip. Try to detect this
in the kue_load_fw() routine and bail if the firmware is already
loaded and running.

Also, in the probe/match routine, force the revision code to the
hardware default and force a rescan of the quirk database. This is
necessary because the adapter will return a different revision code
if the firmware has been loaded. Without the firmware, the revision
code is 0x002. With the firmware, the revision code is 0x202. This
confuses the quirk mechanism, which won't match a quirk to a device
unless the revision code agrees with the quirk table entry.

This makes probe/attach of these devices somewhat more reliable.

Also add a few comments about the device's operation.
2000-01-05 17:13:50 +00:00
Peter Wemm
bcae942098 Zap pci_map_dense() and pci_map_bwx() - they were for compatability but
are not used.  All the drivers that use memory mapped IO on the Alpha have
been ported already.
2000-01-05 16:40:10 +00:00
Peter Wemm
37286586ff Patch up some of the evilness left over from the early newbus porting.
In particular:
 - Don't leave resources allocated in the probe routine.  Allocate them
   during probe and release them.  Probe's job is to identify devices only.
 - Don't abuse the ivars pointer.. (!).  Create real ivars and use the
   proper access system.  (the bus_read_ivar method)
 - Don't add the children until attach() has successfully grabbed the
   hardware, otherwise there are potential leaks if attach fails.
2000-01-05 16:31:27 +00:00
Eivind Eklund
3418fe8734 KERNEL -> _KERNEL 2000-01-05 16:25:20 +00:00
KATO Takenori
f64ac1e326 Synced with sys/i386/isa/clock.c rev 1.149. 2000-01-05 12:35:03 +00:00
KATO Takenori
eb8d1d832c Synced with sys/i386/i386/userconfig.c rev 1.166. 2000-01-05 12:34:10 +00:00
KATO Takenori
f030ad5fda Synced with sys/i386/conf/GENERIC rev 1.222. 2000-01-05 12:33:10 +00:00
Greg Lehey
ffa258b0aa Explicitly type large scalar parameters to avoid compilation warnings
on alpha.

Submitted-by:	      Bernd Walter <ticso@cicely.de>

struct sd: Add a field for the pid of the reviver when the subdisk is
reviving.

Replace block device macros with generalized device macros.
2000-01-05 06:13:01 +00:00
Greg Lehey
a7482aa7d5 When attaching a plex to a volume with 'up' subdisks, make the plexes
subdisks 'stale', not 'reviving'.
2000-01-05 06:12:25 +00:00
Greg Lehey
b110a1e60b Correct printf format for pointers to avoid compilation warnings on
alpha.

Explicitly type large scalar parameters to avoid compilation warnings
on alpha.

Submitted-by:	      Bernd Walter <ticso@cicely.de>

Make better checks that the revive block size is valid, silently set
it to the defaults if not.

Replace block device macros with generalized device macros.
2000-01-05 06:11:46 +00:00
Greg Lehey
0ea9d6fbc7 Correct printf format for pointers to avoid compilation warnings on
alpha.

Modify the manner in which we lock RAID-5 plexes.  This appears to
solve some of the elusive panics we have seen with corrupted buffer
headers (specifically the zeroed-out b_iodone field).

Submitted-by:	      Bernd Walter <ticso@cicely.de>
2000-01-05 06:10:52 +00:00
Greg Lehey
984e8b9ada Modify the manner in which we lock RAID-5 plexes. This appears to
solve some of the elusive panics we have seen with corrupted buffer
headers (specifically the zeroed-out b_iodone field).

Submitted-by:	      Bernd Walter <ticso@cicely.de>
2000-01-05 06:09:43 +00:00
Greg Lehey
dbd8153d5e Change the name of the define 'SPACETAB' (originally 'isspace') to
'iswhite'.  The original change was required because of name
conflicts.

Add key pairs for the keywords 'mv' and 'move' (part of the move
command).

Add comments.
2000-01-05 06:08:55 +00:00
Greg Lehey
5b58d7c1a2 Include basename() function even if the system isn't i386.
Correct printf format for pointers to avoid compilation warnings on
alpha.

Submitted-by:	      Bernd Walter <ticso@cicely.de>
2000-01-05 06:08:23 +00:00
Greg Lehey
a86a06a0b5 Add the keywords 'mv' and 'move'. 2000-01-05 06:07:59 +00:00
Greg Lehey
5756902abc Add function moveobject, which currently moves subdisks to different
drives.  This function just does the low-level configuration changes;
the resultant subdisk is stale if it previously had any contents,
otherwise it is empty (i.e. in need of initializing if it's RAID-5).
We still need to handle getting the contents moved over, but the
current version will suffice to migrate subdisks from a disk which has
failed.

Submitted-by:  Marius Bendiksen <marius@marius.scancall.no>
2000-01-05 06:07:26 +00:00