Commit Graph

2932 Commits

Author SHA1 Message Date
Hans Petter Selasky
6446f79981 Add new USB device ID.
PR:		usb/169789
MFC after:	1 week
2012-07-16 09:35:47 +00:00
Hans Petter Selasky
48804d9c0e Add new USB device ID.
PR:		usb/169789
MFC after:	1 week
2012-07-15 18:12:09 +00:00
Rui Paulo
63490e32b2 The JP1082 device doesn't respond to the MII_BMSR command and it turns
out that it has an unusable PHY. It still works, although very slowly,
without a PHY, so I implemented non-PHY support in the udav driver.
2012-07-15 05:49:02 +00:00
Hiroki Sato
89b4ba9934 Merge from r234532:
- Fix an ifname matching issue which prevented "ifconfig wlan0 create" from
  working.
- Return non-zero status when unit < 0.

Spotted by:	dhw
2012-07-11 02:57:32 +00:00
Hiroki Sato
739047446d Make usbusN logging pseudo-interface used by usbdump(8) clonable. One is
now created/destroyed automatically by usbdump(8).

Note that "hw.usb.no_pf" loader tunable is now obsolete.

Reviewed by:	hselasky
2012-07-09 07:25:09 +00:00
Hiroki Sato
be5033937a - Add support of the following USB devices to run(4):
* Logitec LAN-W150N/U2
 * Buffalo WLI-UC-GNM2

- Add device id of Planex GW-USValue-EZ.
2012-07-09 06:34:15 +00:00
Hans Petter Selasky
583cd66931 Add new USB device ID.
Submitted by:	Erich Dollansky
MFC after:	1 week
2012-07-03 16:32:47 +00:00
Hans Petter Selasky
e84260dce4 Add more quirks for USB mass storage adapters.
Submitted by:	Erich Dollansky
MFC after:	1 week
2012-07-03 16:29:41 +00:00
Alexander Motin
f0d0cee0be Add IDs for some USB controllers I have around. Just a cosmetics.
MFC after:	3 days
2012-07-02 19:35:56 +00:00
Marius Strobl
f3b44896bb Refine r237102 a bit:
- Anounce JTAG interfaces deliberately skipped.
- Bring back empty lines too eagerly removed.

MFC after:	3 days
2012-06-18 19:18:31 +00:00
Marius Strobl
a589806b07 - Add support for the FT2232 based egnite Turtelizer 2 JTAG/RS232 Adapter.
This includes adding support for skipping FTDI interfaces used for JTAG
  leaving them for userland and just attaching to the RS232 half, similarly
  to how the corresponding Linux drivers handles these kind of adapters.
  While at it, sort uftdi_devs and return BUS_PROBE_SPECIFIC (because
  uftdi_probe() alters the instance variables for better or worse as do
  other probe routines of USB drivers) instead of 0.
- Remove duplicated entries for BeagleBone.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Remove some stray lines.

MFC after:	3 days
2012-06-14 21:16:19 +00:00
Hans Petter Selasky
271e5fb00d Add more quirks for USB MIDI adapters.
Obtained from:	Clemens Ladisch
MFC after:	1 week
2012-06-14 16:20:19 +00:00
Hans Petter Selasky
bb57146269 Add appropriate checks for ic_bsschan being set to IEEE80211_CHAN_ANYC in
some of the USB WLAN drivers. This fixes a panic when using monitor mode.

MFC after:	1 week
Submitted by:	PseudoCylon
2012-06-02 09:10:51 +00:00
Hans Petter Selasky
d9073c1e6a Improve support for detaching kernel drivers on a per interface basis.
MFC after:	1 week
2012-06-01 16:30:54 +00:00
Rafal Jaworowski
c49504be41 Import EHCI attachment driver for Freescale integrated controller.
Obtained from:	Freescale, Semihalf.
Written by:	Michal Dubiel
2012-05-26 21:05:11 +00:00
Marius Strobl
243d601f05 Make the VIA workaround application somewhat more consistent with the
ATI one.
2012-05-26 08:43:51 +00:00
Marius Strobl
af3839c4ab Consistently use USB_PAGE_SIZE. Currently, this is cosmetic.
MFC after:	3 days
2012-05-26 08:33:53 +00:00
Marius Strobl
7e543a0ed3 Make the VIA workaround actually do its intended job.
MFC after:	3 days
2012-05-26 08:31:12 +00:00
Alexander Motin
3dfe1a8e49 Fix for the r235558: interrupt output pipe is optional, so fix the driver
attach and operation when it is absent.

Sponsored by:	iXsystems, Inc.
MFC after:	1 week
2012-05-17 22:04:17 +00:00
Alexander Motin
3a38def3ed Add support for writing to HID devices through the interrupt output pipe.
Supermicro LCD screen modules seem to not support accessing reports through
the control pipes, but working fine with the interrupt pipes.

Sponsored by:	iXsystems, Inc.
MFC after:	1 week
2012-05-17 18:40:27 +00:00
Alexander Motin
cff79d9ed3 HID Report ID is unsigned value, so clear the rest of bits from possible
sign expansion.
2012-05-16 17:51:56 +00:00
Hans Petter Selasky
32e79f5540 Move reset of USB mouse parameters from the USB mouse attach to
the USB mouse device open. Protect against multi character
device open. Some other nits.

MFC after:	1 week
2012-05-14 17:00:32 +00:00
Marius Strobl
e4029d4cac - Change the module order of these MAC drivers to be last so they are
deterministically handled after the corresponding PHY drivers when
  loaded as modules. Otherwise, when these MAC/PHY driver pairs are
  compiled into a single module probing the PHY driver may fail. This
  makes r151438 and r226154 actually work. [1]
  Reported and tested by: yongari (fxp(4))
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

Submitted by:	jhb [1]
MFC after:	3 days
2012-05-11 02:40:40 +00:00
Hans Petter Selasky
7e66ab7cb6 Make sure the EHCI bandwidth allocation algorithm
for FULL speed SPLIT transactions works fully.

MFC after:	1 week
2012-05-03 16:06:22 +00:00
Hans Petter Selasky
0a4cc48fe5 Add support for Multi-TT mode of modern USB HUBs.
This will give you more bandwidth for isochronous
FULL speed applications connected through a
High Speed HUB.

This patch has been tested with XHCI and EHCI.

MFC after:	1 week
2012-04-29 17:12:33 +00:00
Kevin Lo
03167052c4 Add support for the SIMCom SIM5218, tested by me. 2012-04-21 14:30:51 +00:00
Thomas Quinot
4815449e08 Fix typo in comment 2012-04-18 12:50:13 +00:00
Hans Petter Selasky
6d917491f5 Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after:	1 weeks
2012-04-02 10:50:42 +00:00
Hans Petter Selasky
4563ba7a0d Add definitions and structures for USB 2.0 Link Power Management, LPM.
MFC after:	2 weeks
2012-04-02 07:51:30 +00:00
Bernhard Schmidt
f9d032660b Load the firmware during init not attach, as a root filesystem might
not yet be available. While here, also print the firmware version.

Submitted by:	PseudoCylon
MFC after:	3 days
2012-03-21 19:08:44 +00:00
Hans Petter Selasky
b733be57cc Add new USB device IDs.
PR:		usb/165815
MFC after:	1 week
2012-03-08 07:22:41 +00:00
Hans Petter Selasky
0b8de86913 Fix for DWC OTG interrupt register programming.
Fix a compiler warning.
Add missing header file.

MFC after:	1 week
2012-03-05 06:41:44 +00:00
Hans Petter Selasky
02f728afc9 Make sure that the USB system suspend event is executed synchronously
and not asynchronously. This fixes problems related to USB system
suspend and resume.  It is assumed that we are always allowed to sleep
from the device_suspend() method.

MFC after:	1 week
Submitted by:	jkim
2012-03-03 08:11:04 +00:00
Hans Petter Selasky
0e03919dc4 Style change: Expand redundant #if's. Remove a couple of empty lines.
MFC after:	1 week
2012-03-01 20:25:17 +00:00
Hans Petter Selasky
335dd8f82f Close a detach race. Make sure all pending
CCB's get canceled at device detach.

MFC after:	1 week
2012-03-01 20:10:54 +00:00
Kevin Lo
d4d6dcc5bb Add support for the MCS7832
Obtained from:	OpenBSD
2012-02-28 15:45:42 +00:00
Hans Petter Selasky
a40c00a535 Add new USB device ID.
MFC after:	3 days
PR:		usb/165154
2012-02-14 21:36:55 +00:00
Ed Schouten
7870adb640 Remove direct access to si_name.
Code should just use the devtoname() function to obtain the name of a
character device. Also add const keywords to pieces of code that need it
to build properly.

MFC after:	2 weeks
2012-02-10 12:35:57 +00:00
Attilio Rao
5d7380f8e3 Avoid to check the same cache line/variable from all the locking
primitives by breaking stop_scheduler into a per-thread variable.
Also, store the new td_stopsched very close to td_*locks members as
they will be accessed mostly in the same codepaths as td_stopsched and
this results in avoiding a further cache-line pollution, possibly.

STOP_SCHEDULER() was pondered to use a new 'thread' argument, in order to
take advantage of already cached curthread, but in the end there should
not really be a performance benefit, while introducing a KPI breakage.

In collabouration with:	flo
Reviewed by:	avg
MFC after:	3 months (or never)
X-MFC:		r228424
2012-01-28 14:00:21 +00:00
Hans Petter Selasky
dd03e19c08 Add support for the DesignWare USB 2.0 OTG controller chipset.
Currently the code is not built by any modules. That will
be fixed later. The Atmel ARM bus interface file part of this
commit is just for sake of example. All registers and bits are
declared like macros and not C-structures like in official
Synopsis header files. This driver mostly origins from the
musb_otg.c driver in FreeBSD except that the chip specific
programming has been replaced by the one for DWC 2.0 USB OTG.
Some parts related to system suspend and resume have been left
like empty functions for the future. USB suspend and resume is
fully supported.
2012-01-21 13:31:38 +00:00
Hans Petter Selasky
6f0e06a10e Add support for new USB device.
PR:		usb/164275
MFC after:	3 days
2012-01-19 18:03:52 +00:00
Stanislav Sedov
f6d505ea58 - Add ID for the BeagleBone FTDI serial over usb port.
MFC after:	3 days
2012-01-16 23:14:23 +00:00
Hans Petter Selasky
36dc69c414 Add support for more USB devices.
Submitted by:	pav @
MFC after:	1 week
2012-01-16 22:26:25 +00:00
Hans Petter Selasky
96d87d2b69 Export ttyname instead of ttyunit via the sysctl interface.
Submitted by:	Mykhaylo Yehorov
PR:		usb/164090
MFC after:	1 week
2012-01-16 10:42:43 +00:00
Hans Petter Selasky
3a4a1a7f8a Export information about USB serial port unit and port numbers
directly via the sysctl interface.

Submitted by:	Mykhaylo Yehorov
PR:		usb/164090
MFC after:	1 week
2012-01-16 08:13:25 +00:00
Tim Kientzle
79ca35f323 BeagleBone uses an FTDI chip with
an altered Product ID.
2012-01-15 23:00:33 +00:00
Ulrich Spörlein
9a14aa017b Convert files to UTF-8 2012-01-15 13:23:18 +00:00
Hans Petter Selasky
93ee6e858b Improve support for USB 3.0 HUBs. In certain states we
should do a warm reset instead of the default reset.

MFC after:	5 days
2012-01-13 22:26:13 +00:00
Hans Petter Selasky
e02f894bbe Bugfix: Make sure the XHCI driver doesn't clear
the route string field. Else USB 3.0 HUBs
won't work.

MFC after:	5 days
2012-01-13 22:19:14 +00:00
Hans Petter Selasky
99b0e60766 Correct use of USB 3.0 POWER bit in the port status register,
hence it was overlapping the USB 3.0 root HUB's speed bits.

Reported by:	Kohji Okuno
MFC after:	1 week
2012-01-13 07:28:34 +00:00
Hans Petter Selasky
4131f6fb60 - Try to fix support for USB 3.0 HUBs.
- Try to fix support for USB 3.0 suspend and resume.

MFC after:	1 week
2012-01-12 21:21:20 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Hans Petter Selasky
6bbe7cdfb2 Make sure we probe and attach the root HUB after
resume else no devices will appear again.

MFC after:	1 day
2012-01-02 20:28:33 +00:00
Hans Petter Selasky
c2d0465a9b Add missing change to XHCI driver similar to changes in r228483.
MFC after:	0 days
2011-12-31 13:34:42 +00:00
Oleksandr Tymoshenko
d42cc94633 - Enable usbus on octusb 2011-12-24 00:22:21 +00:00
Andriy Gapon
bc40a96992 ukbd: adjust for SCHEDULER_STOPPED() and overhaul locking code
This change is designed to let USB keyboard work in the panic context
with stop_scheduler_on_panic=1.  Most of change consists of removing
mtx_owned() checks where they can be easily avoided.  Some additional
lock cleanup is performed along the way.

A list of the smaller changes:
- newbus methods should be executed with Giant already held, just assert
  this
- kbd methods called in the non-polling context should be executed with
  Giant already held, just assert this
- Giant is recursive, so we should just take it where we must have it,
  without redundant checks if we already have it
- thanks to recent syscons changes we don't need to go through the hoops
  to detect if kernel is going to poll us; polling mode is now clearly
  separated from non-polling mode
- at present the polling mode can be entered by only one thread
- document special cases in greater detail

Please note that the ukbd code and underlying USB code still lve
dangerously in the kdb context by trying to obtain various locks
including the Giant.  If any of those locks are already held by the
stopped threads, then the things would blow up.
Another limitation of the ukbd driver is that it is detached before a
system enters the halt state.

With this commit we can enable kern.stop_scheduler_on_panic by default,
that should not introduce any regressions.

Reviewed by:	hselasky
MFC after:	3 months
X-MFC after:	r228424, r228760
2011-12-21 11:49:33 +00:00
Andriy Gapon
6703915ee7 adapt usb transfer code for SCHEDULER_STOPPED
When SCHEDULER_STOPPED() is true the mtx_owned() call may return
an unexpected and thus meaningless result.
So, in the code paths that can be reached when SCHEDULER_STOPPED() is true
we need to protect the mtx_owned() calls with the SCHEDULER_STOPPED()
checks and ensure that an appropriate branch is taken in each case.

Reviewed by:	hselasky
MFC after:	3 months
X-MFC after:	r228424
2011-12-21 10:52:17 +00:00
Hans Petter Selasky
85b44a018c Fix for race against user-space applications trying to change the
configuration on USB HUBs.

PR:		kern/163091
MFC after:	1 week
2011-12-21 08:46:08 +00:00
Hans Petter Selasky
d63cc02d7a Make the recently added "no_shutdown_wait" sysctl writeable.
Suggested by:	avg @
MFC after:	3 days
2011-12-19 23:39:08 +00:00
Hans Petter Selasky
5ed294aec0 Add code to wait for USB shutdown to be executed at system shutdown.
Add sysctl which can be used to skip this waiting.

MFC after:	3 days
2011-12-19 15:35:05 +00:00
Hans Petter Selasky
6bd3e53514 Add missing unlock of USB controller's lock, when
doing shutdown, suspend and resume.

Suggested by:	avg @
MFC after:	3 days
2011-12-19 14:53:42 +00:00
Kevin Lo
0022629fe0 Another axe(4), found in ASUS zenbook. 2011-12-17 15:38:16 +00:00
Andriy Gapon
9976156f12 kern cons: introduce infrastructure for console grabbing by kernel
At the moment grab and ungrab methods of all console drivers are no-ops.

Current intended meaning of the calls is that the kernel takes control of
console input.  In the future the semantics may be extended to mean that
the calling thread takes full ownership of the console (e.g. console
output from other threads could be suspended).

Inspired by:	bde
MFC after:	2 months
2011-12-17 15:08:43 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Hans Petter Selasky
58a1ff3bf4 Improve fix for random USB transfer time out.
Suggested by:	YougHyeon
MFC after:	3 days
2011-12-14 22:14:05 +00:00
Hans Petter Selasky
663e39b0b5 Fix for random USB transfer time out.
Submitted by:	PseudoCylon
MFC after:	3 days
2011-12-14 08:52:27 +00:00
Hans Petter Selasky
5f63a5d203 Fix definition of XHCI port power bit.
Reported by:	Kohji Okuno
MFC after:	3 days
2011-12-14 08:44:16 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Hans Petter Selasky
e6ee4f7d33 Correct some bInterval USB template descriptor values.
MFC after:	3 days
2011-12-06 08:08:52 +00:00
Hans Petter Selasky
677034d566 Fix compile warning when using clang to compile the code.
Submitted by:	arundel @
MFC after:	3 days
2011-12-06 07:55:25 +00:00
Ed Maste
c3369741c2 Add quirk for Micron RealSSD eUSB failing on unsupported SCSI command
It appears this device fails if sent a SYNCHRONIZE_CACHE command, so add
quirk to avoid sending it.

I will follow up with Micron on this issue, and will adjust the quirk if
necessary based on their feedback.

Reviewed by:	hselasky@
2011-12-03 19:56:52 +00:00
Hans Petter Selasky
87812fcec3 Fix a compile warning with clang.
Reported by:	arundel @
MFC after:	3 days
2011-12-03 14:54:44 +00:00
Kevin Lo
aba07fdf5a Fix checks for error return from urtw_alloc_rx_data_list() and
urtw_alloc_tx_data_list().
2011-12-02 02:19:03 +00:00
Hans Petter Selasky
9c7e90ba9d This commit marks the beginning of a new internal USB
transfer statemachine. This work is about using a single
state variable instead of multiple state bits as input
for the USB statemachine to determine what to do in the
various parts of the code. No APIs towards USB device
drivers or USB host controller drivers will be changed.

MFC after:	1 month
2011-11-28 09:54:41 +00:00
Marius Strobl
604f5f1f77 Use DEVMETHOD_END. 2011-11-23 20:27:26 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Hans Petter Selasky
2634f5d710 Add new USB IDs to RUN driver.
PR:		usb/162712
MFC after:	1 week
2011-11-21 07:50:29 +00:00
Martin Wilke
0c7d93ff26 - Add support for Add LOGITECH Webcam C100
- While here whitespace fixes

PR:		usb/161559
Submitted by:	Sergey Zaykov <mail_of_sergey@mail.ru>
Reviewed by:	hselasky
Approved by:	hselasky, rwatson (mentor)
2011-11-20 12:26:20 +00:00
Hans Petter Selasky
3ddd1777d5 Simplify the usb_pause_mtx() function by factoring out the generic parts
to the kernel's pause() function. The pause() function can now be used
when cold != 0. Also assert that the timeout in system ticks must be
positive.

Suggested by:	Bruce Evans
MFC after:	1 week
2011-11-19 11:17:27 +00:00
Hans Petter Selasky
11bcf702f4 Move the device_delete_all_children() function from usb_util.c
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().

MFC after:	1 week
2011-11-19 10:11:50 +00:00
Hans Petter Selasky
8c09f3a15f Make some XHCI command timeouts less strict.
Reported by:	Jan Henrik Sylvester
MFC after:	1 week
2011-11-18 08:31:24 +00:00
Hans Petter Selasky
b3f52c578b Quirk all of ALCOR's mass storage devices instead of
quirking individual devices.

Submitted by:	Dmitry Luhtionov
MFC after:	1 week
2011-11-17 10:46:51 +00:00
Hans Petter Selasky
96ef942084 Some brands of XHCI controllers needs more time to reset.
Reported by:	Jan Henrik Sylvester
MFC after:	1 week
2011-11-15 20:48:57 +00:00
Hans Petter Selasky
17c78d345c - This patch adds custom IOCTLs to read and write the 4 GPIO pins on the
cp2103 usb-to-serial chip.
- This patch also makes the line status polling asynchronous, to reduce
the time needed to change the GPIO pins.

Submitted by:	JD Louw
MFC after:	1 week
2011-11-12 08:40:52 +00:00
Hans Petter Selasky
2648cd35d8 Enable power save mode for the USB storage device driver.
MFC after:	1 week
2011-11-12 08:19:36 +00:00
Hans Petter Selasky
271ae033e9 Style change.
- Make it easier to port the USB code to other platforms by only using
one set of memory functions for clearing and copying memory. None of
the memory copies are overlapping. This means using bcopy() is not
required.
- Fix a compile warning when USB_HAVE_BUSDMA=0
- Add missing semicolon in avr32dci.
- Update some comments.

MFC after:	1 week
2011-11-12 08:16:45 +00:00
Hans Petter Selasky
b3b1747a98 Fix size of USB 3.0 descriptor field.
MFC after:	3 days
2011-11-09 18:48:36 +00:00
Hans Petter Selasky
c089ba5ed7 Fix size of USB 3.0 descriptor field.
MFC after:	3 days
2011-11-09 18:11:29 +00:00
Hans Petter Selasky
5086c26a6c Some minor corrections to a modem driver.
PR:		usb/162307
MFC after:	3 days
2011-11-09 09:15:57 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Hans Petter Selasky
e6c503f75a Fix build breakage for 8-stable and older.
MFC after:	0 days
2011-11-06 23:26:26 +00:00
Hans Petter Selasky
13ceb65482 Add support for new USB modem protocol.
PR:		usb/159919
MFC after:	1 week
2011-11-06 23:11:30 +00:00
Hans Petter Selasky
0527a869a9 Implement support for modem control lines.
Don't short terminate transmitted BULK data.
Assume that the chip reads one USB packet at a time.

PR:		usb/162307
MFC after:	3 days
2011-11-05 12:01:51 +00:00
Hans Petter Selasky
87a133a7a5 Fix for panic at USB controller attach failure during cold boot.
Reported by:	Jan Henrik Sylvester, Xin LI and more.
MFC after:	3 days
2011-11-04 09:19:18 +00:00
Hans Petter Selasky
9157ad4b17 Improve USB mass storage quirk auto detection.
MFC after:	3 days
2011-10-29 12:32:13 +00:00
Hans Petter Selasky
3d09c7b327 Fix suspend and resume of FULL and HIGH speed USB devices
in the generic XHCI driver. There appears to be some minor
logic missing for this feature to work.

MFC after:	3 days
2011-10-26 17:43:27 +00:00
Pyun YongHyeon
cdc2a5ec78 Implement TX/RX checksum offloading support for ASIX AX88772B
controller.

AX88772B data sheet does not show detailed information about
checksum offloading related things. It seems the controller has
lots of options to support checksum offloading but I failed to
understand why this feature requires so much complex controller
configuration and status bits.
One of major difference between AX88772B and its predecessor is
AX88772B uses a new RX header format when RX checksum offloading is
enabled.  It also requires the received length of a frame should be
multiple of 4.  Controller will pad necessary bytes to make the
length of received frame to be multiple of 4.  It is driver's
responsibility to offset this pad bytes.
Note, AX88772B could be configured to get partial checksum value in
in RX header. This mode uses different RX header format and
currently we don't use that fature.

This change makes axe(4) use driver specific MII attach handler to
override uether(9)'s default MII attach and announce flow-control
capability for AX88178/AX88772A/AX88772B to PHY drivers.  It seems
original AX88772 also supports flow-control but I didn't enable it
due to lack of test/access to the controller.  The flow-control
threshold parameter is loaded from EEPROM and there is no way to
override this value without reprogramming EEPROM. For AX88772B,
TX/RX IP/TCP/UDP checksum offloading is announced to network stack.
IPv6 and PPPoE checksum offloading is also supported by controller
but we have no way to take advantage of these features.
Driver already knows PHY address so make PHY driver know that
information and remove unnecessary PHY address check used in
miibus_readreg/miibus_writereg callbacks.  Also announce AX88178,
AX88772A and AX88772B support VLAN over-sized frame.

While I'm here clean up headers and remove axe_start() in
axe_init() because the link wouldn't be available right after media
change.
2011-10-25 18:36:18 +00:00
Pyun YongHyeon
5c6b53d82c This change makes it possible to define driver specific attach
handler such that driver can announce interface capabilities and
can do its own MII attach.  Currently all USB ethernet controllers
have no way to establish a link with pause capabilities. Lack of
checksum offloading support also was one of reason to bring this
change in.

This change adds a couple of wrappers to USB ethernet drivers
(uether_ifmedia_upd, uether_init and uether_start). All exported
functions in uether has prefix uether_ so I think it's more
consistent to have wrappers that follow the convention.
This change preserves ABI/KPI so it should be safe to merge this
change to stable/8.

While I'm here add missing __FBSDID and clean up headers.

Reviewed by:	hselasky
2011-10-24 23:38:11 +00:00
Hans Petter Selasky
c8eeb97178 Add new USB IDs to RUN driver. Update usb.conf.
PR:		usb/161798
MFC after:	3 days
2011-10-19 10:09:01 +00:00
Pyun YongHyeon
e9e549ef70 Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:51:38 +00:00
Bjoern A. Zeeb
8797cafe81 Fix build after r226465.
Cast void * to char * for arithmetics and make function return "no error".

MFC after:	3 days
2011-10-17 13:51:00 +00:00
Adrian Chadd
65d7e4d9f1 Fix an issue with 11g beacon frames which looks to be a limitation
on the largest multi-write size.

From the submitter:

==
I looked further into the magic 88-byte threshold after which the bug
occurs.  It turns out that figure included the 24-byte tx_desc, and up
to 64 bytes of beacon frame (header+data).

rum_write_multi doesn't seem happy with writing >64 bytes at a time to
the MAC register.  If I break it up into separate calls (e.g. bytes
0-63, then bytes 64-65, written at the appropriate offset) I see the
proper beacon frames being transmitted now.
==

Submitted by:	Steven Chamberlain <steven@pyro.eu.org>
MFC after:	3 days
2011-10-17 13:12:47 +00:00
Hans Petter Selasky
1984dc56b2 Add USB mass storage quirk for device that emits errors after the automatic
no synchronize cache detection.

Submitted by:	Scott Allendorf
MFC after:	3 days
2011-10-10 16:26:06 +00:00
Hans Petter Selasky
f6c6639af8 Bugfix: The ucom detach function is sometimes called on zeroed structures.
Check for this case and just return, so that the UCOM unit number zero is
not accidentially freed.

Submitted by:	Danish FreeBSD user at EuroBSDcon 2011
MFC after:	3 days
2011-10-10 15:54:44 +00:00
Marius Strobl
112a855de7 - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY
drivers that only ever attach to a particular MAC driver, i.e. inphy(4),
  ruephy(4) and xlphy(4), to the directory where the respective MAC driver
  lives and only compile it into the kernel when the latter is also there,
  also removing it from miibus.ko and moving it into the module of the
  respective MAC driver.
- While at it, rename exphy.c, which comes from NetBSD where the MAC driver
  it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD
  actually identifies itself as xlphy(4), and its function names accordingly
  for consistency.
- Additionally while at it, fix some minor style issues like whitespace
  in the register headers and add multi-inclusion protection to inphyreg.h.
2011-10-08 12:33:10 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
Alexander Motin
7778ab7e0c MFprojects/hid:
Import the rest of HID improvements from the branch:
 - improve report descriptor parser in libusbhid to handle several kinds of
reports same time;
 - add to the libusbhid API two functions wrapping respective kernel IOCTLs
for reading and writing reports;
 - tune uhid IOCTL interface to allow reading and writing arbitrary report,
when multiple supported by the device;
 - teach usbhidctl to set output and feature reports;
 - make usbhidaction support all the same item names as bhidctl.

Sponsored by: iXsystems, inc.
2011-09-28 14:52:25 +00:00
Hans Petter Selasky
2325ea82ad Add quirks for some USB mass storage devices which doesn't respond
after trying to query the synchronize cache support.

Submitted by:	Keith White
PR:		usb/160911
Approved by:	re (kensmith)
MFC after:	1 week
2011-09-27 07:06:02 +00:00
Hans Petter Selasky
3e677ca02c Avoid starting the USB transfer if an error is already pending.
This change fixes a race in device side mode during clear-stall from
host, which can cause data to be sent too early on the given
endpoint.

Approved by:	re (kib)
MFC after:	1 week
2011-09-20 14:17:58 +00:00
Kip Macy
8451d0dd78 In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
Hans Petter Selasky
7cd72d8565 Reduce USB memory usage during enumeration.
We are allocating some kilobytes of extra memory during USB device enumeration.
This does not change alot under FreeBSD, but makes sense for various embedded
operating systems using the FreeBSD USB stack, which have less memory
resources available.

Approved by:	re (kib)
MFC after:	1 week
2011-09-14 15:16:53 +00:00
Hans Petter Selasky
3f37fb622c Refactor auto-quirk solution so that we break as few external
drivers as possible.

PR:		usb/160299
Approved by:	re (kib)
Suggested by:	rwatson
MFC after:	0 days
2011-09-10 15:55:36 +00:00
Hans Petter Selasky
d334432fd3 Some USB mass storage devices requires that the sense information
is retrieved after a failed SCSI command to continue normal
operation. Else this sense information is retrived at the next
SCSI command.

Approved by:	re (kib)
Reported by:	Alex Kozlov
MFC after:	1 week
PR:		usb/160299
2011-09-05 14:37:59 +00:00
Hans Petter Selasky
d46dc4ad74 This patch adds automatic detection of USB mass storage devices
which does not support the no synchronize cache SCSI command.

The __FreeBSD_version version macro has been bumped and
external kernel modules needs to be recompiled after
this patch.

Approved by:    re (kib)
MFC after:      1 week
PR:		usb/160299
2011-09-02 18:50:44 +00:00
Hans Petter Selasky
d840e1d248 Add new USB ID to u3g driver.
Approved by:    re (kib)
MFC after:      1 week
PR:		usb/159919
2011-08-20 16:21:40 +00:00
Hans Petter Selasky
fbaee0f1f5 Fix for recursive locking in usb_close() after change 224777.
Approved by:    re (kib)
MFC after:      3 days
Reported by:	kwm @
2011-08-20 15:12:53 +00:00
Hans Petter Selasky
0f92e529e1 Add new USB ID.
Approved by:    re (kib)
MFC after:      1 week
PR:		usb/159836
2011-08-20 14:21:32 +00:00
Hans Petter Selasky
9465dbeb5c Add sysctl to not reset the device on clear stall failures, to
temporarily mitigate problems with VMs.

Approved by:    re (kib)
MFC after:      1 week
2011-08-19 09:01:34 +00:00
Hans Petter Selasky
2ffd5fdcc4 Use synchronous device destruction instead of asynchronous, so that a new
device having the same name like a previous one is not created before the old
one is gone. This fixes some panics due to asserts in the devfs code which
were added recently.

Approved by:    re (kib)
MFC after:      1 week
2011-08-11 11:30:21 +00:00
Alexander Motin
477a63a864 Do not block zero report ID. It is correct value for devices with single
ID. This fixes USB_SET_IMMED call (synchronous operation) of the uhid(4)
driver on devices with single report ID.

Reviewed by:	hselasky
Approved by:	re (kib)
MFC after:	1 week
2011-08-09 08:11:26 +00:00
Alexander Motin
7ea00a6866 Make ums(4) driver more picky, not attaching to "mouses" with absolute
coordinates, such as digitizers and touch-screens, leaving these devices
to uhid(4) and user-level. Specially patched xf86-input-mouse driver can
handle them, that isn't done and can't be done properly with ums(4)
because of mouse(4) protocol limitations.

Approved by:	re (kib)
2011-07-29 20:38:06 +00:00
Hans Petter Selasky
14bd1ee52c Add new USB ID to u3g driver.
Approved by:	re (kib)
Submitted by:	Nick Hibma
MFC after:	3 days
2011-07-21 06:55:43 +00:00
Hans Petter Selasky
25abfdf02f Only the USB root HUB thread is allowed to attach and detach drivers
to and from USB devices. Remove related DEVMETHOD() lines from USB
drivers.

Reported by:	YongHyeon PYUN
MFC after:	3 days
2011-07-18 12:03:58 +00:00
Ed Schouten
78d4d8eeb2 Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls
to support wide characters. I created a patch to add ABI compatibility
for the old calls, but I didn't get any feedback to that.

It seems now people are upgrading from 8 to 9 they experience this
issue, so add it anyway.
2011-07-17 08:19:19 +00:00
Hans Petter Selasky
f6bd103ef0 Fix for VirtualBox 4.x and other virtual machines that fail
to generate a port reset change event.

MFC after:	1 weeks
2011-07-16 12:50:30 +00:00
Pyun YongHyeon
14ae1fa4cf Add initial support for AX88772B USB Fast Ethernet. AX88772B
supports IPv4/IPv6 checksum offloading and VLAN tag insertion/
stripping as well as WOL.  Because uether does not provide a way
to announce driver specific offload capabilities to upper stack,
checksum offloading support needs more work and will be done in
future.
Special thanks to ASIX for donating sample hardware.

H/W donated by:	ASIX Electronics
Reviewed by:	hselasky
2011-07-14 17:19:00 +00:00
Hans Petter Selasky
2b6ce80c82 Fix for dump after shutdown with USB keyboard plugged in. It appears that the
system timer is stopped during shutdown and that the pause() statement in ukbd
causes infinite hang in this regard. The fix is to use mi_switch() instead of
pause() to do the required task switch to ensure that the required USB processes
get executed.

Reported by:	Mike_Karels@mcafee.com
MFC after:	1 week
2011-07-13 21:07:50 +00:00
Hans Petter Selasky
5863e1bc8c Remove reviewed line from copyright header.
Suggested by:	joel @
2011-07-09 20:16:52 +00:00
Hans Petter Selasky
49901133a1 Add new USB 3G driver.
Submitted by:	PseudoCylon <moonlightakkiy@yahoo.ca>
MFC after:	14 days
2011-07-08 10:58:56 +00:00
Hans Petter Selasky
e92091ad3d Make the USB keyboard driver more HID compliant.
Try to auto-detect keyboards which should use the BOOT protocol.

MFC after:	2 weeks
2011-07-04 07:37:28 +00:00
Bjoern A. Zeeb
a34c6aeb85 Tag mbufs of all incoming frames or packets with the interface's FIB
setting (either default or if supported as set by SIOCSIFFIB, e.g.
from ifconfig).

Submitted by:	Alexander V. Chernikov (melifaro ipfw.ru)
Reviewed by:	julian
MFC after:	2 weeks
2011-07-03 16:08:38 +00:00
Hans Petter Selasky
4944c3a882 Introduce a quirk for broken USB MIDI hardware instead of limiting performance
in general.

MFC after:	1 week
2011-07-03 13:27:23 +00:00
Hans Petter Selasky
34e5f64b49 Fix for "nomatch" event for ums and ukbd drivers when uhid is loaded.
MFC after:	3 days
2011-07-02 20:58:33 +00:00
Kevin Lo
ee6eac62f7 Remove duplicate header includes 2011-06-28 08:36:48 +00:00
Gavin Atkinson
16169457f0 The SMCWUSBG is a zyd(4) device, not an uath(4) device. Remove from the
latter.

It appears that the addition to uath(4) came in through PR kern/135009,
which had tested another device, the SMCWUSBTG2, successfully with uath(4)
and included the SMCWUSBG as it "has the same chipset".  I can find no
other evidence that these two do actually share the same chipset.  Moreover,
Linux treats the SMCWUSBG as a zyd(4) device also.

This reverts r223537.

Discussed with:	hselasky, kevlo
MFC after:	1 week
2011-06-26 11:37:24 +00:00
Hans Petter Selasky
1d63770b39 - Export the USB device ID format to userspace tools.
MFC after:	14 days
2011-06-25 15:51:44 +00:00
Hans Petter Selasky
4c8ffb2300 - Remove duplicate USB ID.
MFC after:	3 days
2011-06-25 15:46:24 +00:00
Hans Petter Selasky
9c916c627f - Export more USB device ID's.
- Update bus_auto.conf accordingly.

MFC after:	3 days
2011-06-24 22:01:56 +00:00
Hans Petter Selasky
9cfbe3e76b - Export more USB device ID's.
MFC after:	3 days
2011-06-24 19:32:29 +00:00
Hans Petter Selasky
d43ffe9465 - Ensure that we get all the required nomatch devd events.
MFC after:	3 days
2011-06-24 19:02:56 +00:00
Hans Petter Selasky
a6b6015063 - Move execution of event handlers into the probe and attach function so that
dynamically loaded device drivers get a chance to run their event hooks.

- Decouple the USB suspend and resume lock from witness. It produces some
false warnings due to reusing the lock name among multiple devices.

MFC after:	3 days
2011-06-24 18:14:43 +00:00
Hans Petter Selasky
d16e5e1a84 - Export the URIO USB device ID's.
- Add checks for configuration and interface index.

MFC after:	3 days
2011-06-24 18:11:55 +00:00
Hans Petter Selasky
e71c21385e - Add additional information to the PnP info of USB HUBs children which
is now required by bus_autoconf.
- Allow interface class matching even if device class is vendor specific.
- Update bus_autoconf tool to not generate system and subsystem match lines
  for the nomatch event.

PR:		misc/157903
MFC after:	14 days
2011-06-24 04:16:06 +00:00
Hans Petter Selasky
f1a16106b6 - Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
	host, device or dual mode
- Add generic tool to extract these data:
	tools/bus_autoconf

Discussed with:	imp
Suggested by:	Robert Millan <rmh@debian.org>
PR:		misc/157903
MFC after:	14 days
2011-06-24 02:30:02 +00:00
Hans Petter Selasky
df142785d5 - Add some comments about the origin of some USB descriptors.
MFC after:	7 days
2011-06-23 10:35:45 +00:00
Hans Petter Selasky
399e6543b2 - Add more USB templates for various USB device classes
- Add basic template support for USB 3.0
- Export definition of template sysctl numbers through usb_ioctl.h

MFC after:	7 days
2011-06-23 07:54:03 +00:00
Gavin Atkinson
95db0bf798 Use USB_VENDOR_OVISLINK define rather than the vendor ID.
PR:		usb/158142
Submitted by:	Robert Millan <rmh debian.org>
MFC after:	1 week
2011-06-22 22:08:55 +00:00
Hans Petter Selasky
842014b127 Add new USB ID to UDAV driver.
Submitted by:	Luiz Gustavo S. Costa <lgcosta@pfsense.org>
MFC after:	7 days
2011-06-19 08:34:10 +00:00
Hans Petter Selasky
2906af23b8 Reset clear-stall error counter before setting up the USB control transfers.
MFC after:	14 days
2011-06-06 22:03:09 +00:00