machine independent parts of the existing code to a new file that can be
shared between amd64 and arm64.
Reviewed by: kib (previous version), imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12434
illumos/illumos-gate@5f39f884e25f39f884e2https://www.illumos.org/issues/8605
zfs.exists() in channel programs doesn't return any result, and should have a
man page entry.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
common case where it's needed -- a write followed by a read to the same slave.
The i2c controller in this chip only performs complete transfers, it does
not provide control over start/repeat-start/stop operations on the bus.
Thus, we have gotten a full stop/start sequence rather than a repeat-start
when doing a typical i2c slave access of "write address, read data". Some
i2c slave devices require a repeat-start to work correctly.
These changes cause the controller to do a repeat-start by pre-staging the
read parameters in the controller registers immediate after the controller
has latched the values for the initial write operation, but before any
bytes are actually written. With the values pre-staged, when the write
portion of the transfer completes, the state machine in the silicon sees
a new start operation already staged and that causes it to perform a
repeat-start. The key to tricking the buggy hardware into doing this is
to avoid prefilling any output data in the transmit FIFO so that it is
possible to catch the silicon in the state where transmit values are
latched but the transmit isn't completed yet.
7431 ZFS Channel Programs
illumos/illumos-gate@dfc115332cdfc115332chttps://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
8552 ZFS LUA code uses floating point math
illumos/illumos-gate@916c8d8811916c8d8811https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
8590 memory leak in dsl_destroy_snapshots_nvl()
illumos/illumos-gate@e6ab4525d1e6ab4525d1https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12528
Use make_dev_s(9) to create device, since the device ioctl interface
needs to access si_drv1 to get softc pointer.
Remove the common but not functional attempt to prevent parallel
accesses by file descriptors by blocking more than one open. Either
threads in one process, or forked siblings, or file descriptors passed
over unix domain sockets all allow to execute parallel requests once
one fd is opened. Since ioctl handler uses smbus_request_bus() to
take the bus ownership, the correct mechanism establishes exclusive
access already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When enabled by EEPROM, use it to relax translation address/size alignment
requirements for BAR2 window by 128 or 256 times.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Sync libarchive with vendor.
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
MFC after: 1 week
Security: CVE-2017-14166, CVE-2017-14502
Previously, uiomove_object_page() would maintain LRU by requeuing the
accessed page. This involves acquiring one of the heavily contended page
queue locks. Moreover, it is unnecessarily expensive for pages in the
active queue.
As of r254304 the page daemon continually performs a slow scan of the
active queue, with the effect that unreferenced pages are gradually
moved to the inactive queue, from which they can be reclaimed. Prior to
that revision, the active queue was scanned only during shortages of
free and inactive pages, meaning that unreferenced pages could get
"stuck" in the queue. Thus, tmpfs was required to use the inactive queue
and requeue pages in order to maintain LRU. Now that this is no longer
the case, tmpfs I/O operations can use the active queue and avoid the
page queue locks in most cases, instead setting PGA_REFERENCED on
referenced pages to provide pseudo-LRU.
Reviewed by: alc (previous version)
MFC after: 2 weeks
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
Security: CVE-2017-14166, CVE-2017-14502
Such updates consisted of vast majority of modificiations, especially
in tmpfs_reg_resize.
For the case where page count did no change and the size grew we only
need to update tn_size. Use this fact to avoid vm object lock/relock.
MFC after: 1 week
* Ensure that the datalen always describes the length after the IPv6
header consistently, not matter which protocol us used for probes..
* Document that the default length is 20, not 12.
* Don't send inormation in probe packets which is not needed or
even checked when the responses are processed.
* Address CID 978587.
This is mainly a cleanup preparing the addition of SCTP and TCP
as possible probe packet protocols.
MFC after: 4 weeks
Mention new -n flag.
Remove optional -h from the operation list lines, -h would cause the
utility to exit without performing the action.
Explain the default path behavior, list default path.
Correct example of update performed from the non-default path,
it needs -n and the trailing slash is redundand.
Remove useless BUGS section.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
'-n' option.
Look for updates in the default locations only after user-supplied
locations are tried.
If newer microcode files are put into non-standard path, both measures
allow to avoid situation where older update loaded from the default
path first, and then the second update is applied from non-standard
path. Applying intermediate updates might be undesirable.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This patch modifies the pNFS client layout and deviceinfo structures
to add fields and unions for the Flex File Layout. Until a future
commit adds Flex File layout support, these new fields are not used.
This patch should not affect the "pnfs" option for File Layout.
Existing scripts and associated config such as rc.initdiskless, rc.d/var,
and others, use mdmfs to create memory filesystems. That program accepts a
size argument which allows SI suffixes and treats an unsuffixed number as a
count of 512 byte sectors. That makes it difficult to convert existing
scripts to use tmpfs instead of mdmfs, because tmpfs treats unsuffixed
numbers as a count of bytes. The script logic to deal with existing user
config that might include suffixed and unsuffixed numbers is... unpleasant.
Also, there is no g'tee that tmpfs will be available. It is sometimes
configured out of small-resource embedded systems to save memory and flash
storage space.
These changes enhance mdmfs(8) so that it accepts two new values for the
'md-device' arg: 'tmpfs' and 'auto'. With tmpfs, the program always uses
tmpfs(5) (and fails if it's not available). With 'auto' the program prefers
tmpfs, but falls back to using md(4) if tmpfs isn't available. It also
handles the -s <size> argument so that the mdconfig interpetation of
unsuffixed numbers applies when tmpfs is used as well, so that existing user
config keeps working after a switch to tmpfs.
A new rc setting, mfs_type, is added to etc/defaults/rc.conf to let users
force the use of tmpfs or md; the default value is "auto".
Differential Revision: https://reviews.freebsd.org/D12301
The GCC xmmintrin.h header brokenly includes mm_malloc.h unconditionally.
(The Clang version of xmmintrin.h only includes mm_malloc.h if not compiling
in standalone mode.)
Hack around GCC's broken header by defining the include guard macro ahead of
including xmmintrin.h.
Reported by: lwhsu, jhb
Tested by: lwhsu
Sponsored by: Dell EMC Isilon
Also fix the style of the asprintf(3) call in __collate_load_tables_l().
Both of these lines were modified away from snprintf(3) during the
import from DragonFly/Illumos.
Reviewed by: jilles (briefly over shoulder)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
smb_strdupin() tried to roll a copyin() based strlen to allocate a buffer
and then blindly copyin that size. Of course, a malicious user program
could simultaneously manipulate the buffer, resulting in a non-terminated
string being copied.
Later assumptions in the code rely upon the string being nul-terminated.
Just use copyinstr() and drop the racy sizing.
PR: 222687
Reported by: Meng Xu <meng.xu AT gatech.edu>
Security: possible local DoS
Sponsored by: Dell EMC Isilon
This reduce the spam a user may face when mandoc tries to
figure out if it can renders a manpage or fallback on groff(1)
Reported by: bdrewery
MFC after: 3 days
Add flag to the makefile to allow loader compilation as
Little-Endian 32-bit executable.
Usage:
make WITH_LOADER_FORCE_LE=yes -C sys/boot all
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: imp, nwhitehorn
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D12421
* check mbuf length before doing mtod() and accessing to IP header;
* update oip pointer and all depending pointers after m_pullup();
* remove extra checks and extra parentheses, wrap long lines;
PR: 222670
Reported by: Prabhakar Lakhera
MFC after: 1 week
needed, but it silences an erroneous Coverity warning and makes the code a
little more logically consistent. Also mark the sysctl as MPSAFE.
Sponsored by: Netflix
This patch adds a NFSSTA_FLEXFILE flag that will be used to enable
Flexible File Layout for the NFSv4.1 pNFS client. It is not yet
used, but will be after a future commit adds Flex File Layout support.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
Defining a variable with the description and then only use it in the
SYSCTL declaration led to an unused variable warning. In the SYSCTL the
passed value is discarded using __DESCR.
pmap_remove_all(). If the object to which a page belongs has no
references, then that page cannot possibly be mapped.
Reviewed by: kib
MFC after: 1 week
