Commit Graph

4071 Commits

Author SHA1 Message Date
Bill Paul
7046508cb8 Add entries for the XMAC II's internal PHY and the Broadcom BCM5400
1000baseTx PHY.
2000-04-22 01:54:55 +00:00
Matt Jacob
16c9a708a4 Now that we fixed the isp_sendmarker botch, we can now do initial bus
resets for ULTRA2/ULTRA3 cards again (which were turned off really because
of a botch for dual bus configurations).
2000-04-21 19:18:06 +00:00
Duncan Barclay
4e618aafa1 Functional driver with new command queue in place.
Working download and start/join network. What's nice is that I didn't touch
TX or RX code at all.

Not fully done yet - stubs for assoc, cast, promisc and user param updating. I
can't work out the "nicest" way to get the mcast and promisc interactions
sorted without needing to abort runq commands half way through. And, as
mcast/promisc used elsewhere I want to get this right.

Other stuff
	Fancy new debugging with __FUNCTION__ and __LINE__.

	Lots of panic's inserted until I check some stuff out.

	Removed all of the old scheduler.

	Removed start join timeout as I don't need it.

	Removed the promiscuous broadcast code that waas ifdef'd out.

	New CCS allocation
2000-04-21 15:01:49 +00:00
Matt Jacob
d465588a93 Roll minor version. Increase size (and add defines for) topology storage. 2000-04-21 02:06:30 +00:00
Matt Jacob
9dae880716 Some minor tweaklets. 2000-04-21 02:05:54 +00:00
Matt Jacob
05914a3f9d Add in the now required malloc.h include. I guess somebody
was busy hackin' w/o checking kernel compiles.
2000-04-21 02:05:13 +00:00
Matt Jacob
c88f65e2c0 Pick up topology more sanely at f/w startup. Change the restrictions of
where we can have targets (based on topology).

Much more importantly, make sure all mods to isp_sendmarker or |= so
we don't lose the marking of a bus that needs to have a marker sent for it.
2000-04-21 02:04:34 +00:00
Matt Jacob
b581c6e08f Update (finally) 1.15.37 to 1.19.03 for the 2100. This allows us to not
require full logins after a LIP, which always led to loop resets, and
various other perturbations.

Update 2200 f/w from 2.01.00 release to 2.01.09 release.
2000-04-21 02:01:06 +00:00
Mike Smith
5d278f5cf3 One minor bugfix:
- Free resources in all the possible attachment failure cases.

One critical bugfix:

 - Fix a race where it was possible to get out of synch with the log
   messages from the controller, if the controller hung up for any
   period of time (eg. while resetting a SCSI bus).  This would result
   in an endless string of console errors, bringing the machine to a
   halt.
2000-04-20 23:52:33 +00:00
Warner Losh
db5ca7b1d2 o Preliminary support for mapping the CIS by the driver.
o Modify xe driver to use this.

There's still some issues with this code, so xe can't map the cis just
yet.  I'm thinking about how to resolve the issue.  pccard_nbk's
pccard_alloc_resource is getting in the way.
2000-04-20 08:37:46 +00:00
Warner Losh
41ad2b329a Remove bogus comment 2000-04-20 07:54:59 +00:00
Poul-Henning Kamp
3389ae9350 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
Warner Losh
d3d805e606 OK. Next step: we read in CIS.
I've done this by having requests to allocate memory propigate up the
tree.  We'll see how well this works and reevaluate if it isn't
working well.  Also initialize ptr in the tuple.  As well as minor
reorg of memory allocation.  Likely need to do similar things for I/O
when the time comes.

I've move all defines from pccardchip.h into pccardvar.h and
eliminated pccardchip.h.
2000-04-19 08:31:21 +00:00
Cameron Grant
19b6ac092e try the fix from creative bugzilla for nmi problem
Obtained from:	creative labs bugzilla
2000-04-18 19:11:38 +00:00
Poul-Henning Kamp
ed6aff7387 Remove unneeded <sys/buf.h> includes.
Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.
2000-04-18 15:15:39 +00:00
Warner Losh
03a97e8da7 Provide mem* for compat with NetBSD to fix LINT 2000-04-17 22:58:15 +00:00
Bill Paul
339dabccd7 When in infrastructure mode, use address 3 from the 802.11 header as the
source address when receiving frames (and keep using address 2 when in
pseudo-IBSS mode). This is apparently necessary in order to obtain the
true MAC address of the sending station which is needed for PPPoE.

Patch supplied by: Blaz Zupan <blaz@amis.net>
2000-04-17 18:47:28 +00:00
Cameron Grant
8ae4c159aa more mmap fixes 2000-04-17 17:06:47 +00:00
Cameron Grant
674c45bd04 make drivers start at beginning of buffer when triggered - improves mmap.
not all tested.

not sure about aureal.c or csapcm.c
2000-04-17 16:57:12 +00:00
Warner Losh
3f994c78d5 Remove unloaded printf. We do this now in the newbus layer. 2000-04-17 04:39:38 +00:00
Gerard Roudier
18dfcb3d0e Second patch that prepares for the addition of the
multi-firmware support. This patch just changes
numerous names in the driver sources and is actually
nilpotent. This has been checked by comparing the
generated assembly code.

The names that have been changed are related to the
script names. They were named `script' and `script H'.
They are now named respectively `script A' and
`script B'.
2000-04-16 20:05:36 +00:00
Roger Hardiman
c4a7d3bc98 Remove debugging code 2000-04-16 07:56:58 +00:00
Roger Hardiman
f88d1687fb Fix typo in interrupt handling code and fix bug in setting of adelay 2000-04-16 07:50:09 +00:00
Poul-Henning Kamp
896402f402 Make vinum compile again using the "cast to buf" workaround.
Approved by:	grog
2000-04-16 07:18:08 +00:00
Matthew N. Dodd
ceaa35ef43 - Define registers as offsets from register base rather than offsets from
EISA slot base.
- Remove unused IOPORT resource.

Reviewed by:	 jlemon
2000-04-16 06:12:08 +00:00
Warner Losh
4e84c35af2 Include <sys/bus.h>, which is needed after Doug's latest object changes. 2000-04-16 06:04:13 +00:00
Duncan Barclay
9273e2696c A messy commit that checkpoints the driver (not known to actually work)
before I rip out the scheduler - whilst v. nice 'n all, it is doing the
wrong job. We need something that sends commands to the card atomically
so dhcp etc. works right.

I've renamed and moved a lot of the scheduler code so that it is all
in one place and all starts with ray_cmd_

ray_stop has some debugging crap left in - to be deleted rsn
2000-04-15 19:51:18 +00:00
Duncan Barclay
7bc2218cb9 Merged in a load of information from the card documentation - not finished yet. 2000-04-15 19:44:05 +00:00
Duncan Barclay
f448abcd92 A few comment tidy-ups.
Add a %b printf descriptor

Change the START command to DOWNLOAD to avoid confusion with start
as in transmitting a packet.
2000-04-15 19:21:02 +00:00
Gerard Roudier
454af27b5c First patch that prepares for the adding of multi-firmware
support. Changes are rather simplifications of the SCRIPTS
interface (prior to complexifying it again;) ), dead code
removes and comment fixes.

Code removed:
- Handling of kernel variables referenced from SCRIPTS.
- Handling of selection without ATN.

Slightly rewritten:
- Handling of illegal phase (4/5) and data overrun conditions.

Simplifications:
- Extended error flag and bits now only set from the C code.
- Move the extended error status (xerr_status) and nego
  status (nego_status) outside the data structure accessed
  by SCRIPTS (struct dsb).
- Get rid of the script status field (scr_st).
- Only patch SCR_NO_OP SCRIPTS instructions to adapt SCRIPTS
  to actual chip capabilities.

Cosmetic changes:
- Miscellaneous comments in SCRIPTS.
- FreeBSD_4_Bus define replaced by FreeBSD_Bus_Io_Abstraction.
2000-04-15 10:54:58 +00:00
Roger Hardiman
2767d675a6 Update to driver 2.11.
Driver now compiles on FreeBSD/Alpha, but still requires testing.
Remove a printf, submitted by Chris D. Faulhaber <jedgar@fxp.org>
2000-04-15 07:46:19 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Cameron Grant
603ddb6d5d make mmap sort-of work. there seem to be interactions with certain hw
drivers, so still work in progress.

do various mmap-related ioctls right.

improve blocksize control.

bits of cleanup.
2000-04-15 05:04:12 +00:00
Bill Paul
9ed5b61bdd Change && to || in probe routine so that the mlphy driver doesn't
incorrectly attach itself to ThunderLAN adapters which happen to have
a PHY who's model number happens out to be 0.

Problem reported by: Peter L. Thomas <Pete@painless-computing.com>
2000-04-14 15:31:48 +00:00
Bill Paul
1d6431f625 Add vendor/device codes for SmartBridges SmartLink USB ethernet adapter
(which is actually a CATC Netmate).

Gee. I don't know why people make such a fuss over supporting USB ethernet
NICs. This is easier than collecting graft.
2000-04-14 14:46:22 +00:00
Bill Paul
92ed1e40ae Regenerate. 2000-04-14 14:44:54 +00:00
Bill Paul
cd29a8ae0f Add entry for SmartBridges SmartLink USB ethernet adapter. 2000-04-14 14:43:34 +00:00
Jonathan Lemon
e6affa6696 Change the maximum I/O transfer size to DFLTPHYS. This should fix
write corruption that some users were experiencing.
2000-04-13 23:42:55 +00:00
Matthew N. Dodd
22ca1311c0 - Add an additional call to eisa_add_iospace() so we get the right IOPORT
in attach.
- Change a EISA_CHANNEL_CLEAR to EISA_CHANNEL_BUSY in ida_v1_submit().

This may fix the problem with EISA IDA adapters though we have not heard
back from testers yet.

Reviewed by:	 jlemon
2000-04-13 18:09:05 +00:00
Warner Losh
3a6352bdee checkpoint latest pccard/pcic hacking:
o Eliminate cross calls between the devices.  Instead move to using the
  newbus messaging system.  Added three new card calls: attach_card,
  detach_card, get_type.
o Eliminate interrupt routine in pccard we never use.
o Move from deactivate to detach for removing cards.
o Start mapping CIS memory, but it is broken and causes panics.  At least
  it is closer to working than before.
o Eliminate struct device everywhere.  It was bogus.
o Initialize softc for pccard device so we have valid pointers to
  ourselves.
o Implement routine to find the pcic ivar for a child device of the pccard so
  we can use it to talk to the pcic hardware.
o Lots of minor tiding up.

This version now panics when we try to read the CIS.  The next batch
of work to make this work is what was outlined in my posting to mobile
about resource allocation and such.
2000-04-13 06:42:58 +00:00
Yoshihiro Takahashi
8f230c9baf - Release allocated resources on error.
Reported by YAMAMOTO Shigeru <shigeru@iij.ad.jp>
- Clean up some code.
- Set the value of rid variable to PCI_BASEADR0(== 0x10) (adv_pci.c).
2000-04-12 11:32:13 +00:00
Yoshihiro Takahashi
f3e2cba02f Set the value of rid variable for bus_alloc_resource(dev, SYS_RES_IOPORT,...)
to PCI_BASE_ADDR0 (== 0x10).

Tested by:	Brian Somers <brian@Awfulhak.org>
2000-04-12 11:21:55 +00:00
Semen Ustimenko
0f9ee76b22 Driver is now using miibus, and newbus.
PR:		kern/17601
2000-04-12 06:51:43 +00:00
Semen Ustimenko
b72407814b Added code to handle QS6612 PHY as standard NS PHY
for support of tx driver.
2000-04-11 18:39:00 +00:00
Mike Smith
421f2f7d74 Add features required for basic userland management utility:
- implement user-initiated background drive rebuild
 - implement user-initiated background consistency check
 - log controller-initiated background rebuild/check operations

Try to fix the elusive "invalid log operation" bug, and panic if we do
hit this one in the hopes of getting better information.

Tidy up diagnostic messages.

Try to use disk_create/disk_destroy correctly.  This isn't working
properly yet, but it's not clear whose fault that is.
2000-04-11 02:52:46 +00:00
Duncan Barclay
5cda0b02eb Most of this commit are minor changes whilst trying to make the driver
robust enough to work with dhcp. Essentially the driver returns to userland
before certain commands have been completed by the card. I'm trying to
work out the best way to fix this. There are very minor functional changes,
most of this is debugging.

Rework of debugging so a bit mask is used and re-allocation around the place.

Tried to protect ray_init with a tsleep until the network has been joined. I think this is only a partial fix as we also update the mcast and promisc
values.
2000-04-09 21:07:43 +00:00
Søren Schmidt
4175758a2d Add support for ATA66 on newer revisions of the VIA 82C596 2000-04-09 15:08:27 +00:00
Warner Losh
d85d39f7d1 Re-enable probe for isa and correct the plug and play issue that
caused this device to be disabled.  It will no longer claim all
devices with PNPBIOS enabled.
2000-04-08 17:23:46 +00:00
John Hay
49ce7a6052 Make the N2 isa cards probe again. Remove the unused frame relay hooks.
This should also fix PR 17814 where flags were ignored on the first
usage of ifconfig on the interface.

PR:		17814
2000-04-08 17:14:00 +00:00
Nick Hibma
de9e4dd6e4 Update the urio driver. It now works on NetBSD and OpenBSD as well.
Update the license in the rio_usb.h (now rio500_usb.h) to not be GPL.
Sorry for committing that file in the first place. The change of license
was agreed to by the original author.
2000-04-08 17:02:13 +00:00