to this pmap.c. This new r/w lock is used primarily to synchronize access
to the TTE lists. However, it will be used in a somewhat unconventional
way. As finer-grained TTE list locking is added to each of the pmap
functions that acquire this r/w lock, its acquisition will be changed from
write to read, enabling concurrent execution of the pmap functions with
finer-grained locking.
Reviewed by: attilio
Tested by: flo
MFC after: 10 days
in_cksum.h required ip.h to be included for struct ip. To be
able to use some general checksum functions like in_addword()
in a non-IPv4 context, limit the (also exported to user space)
IPv4 specific functions to the times, when the ip.h header is
present and IPVERSION is defined (to 4).
We should consider more general checksum (updating) functions
to also allow easier incremental checksum updates in the L3/4
stack and firewalls, as well as ponder further requirements by
certain NIC drivers needing slightly different pseudo values
in offloading cases. Thinking in terms of a better "library".
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn (as part of the whole)
MFC After: 3 days
discrepancy between modules and kernel, but deal with SMP differences
within the functions themselves.
As an added bonus this also helps in terms of code readability.
Requested by: gibbs
Reviewed by: jhb, marius
MFC after: 1 week
didn't already have them. This is because the ternary expression will
return int, due to the Usual Arithmetic Conversions. Such casts are not
needed for the 32 and 64 bit variants.
While here, add additional parentheses around the x86 variant, to
protect against unintended consequences.
MFC after: 2 weeks
long for specifying a boundary constraint.
- Change bus_dma tags to use bus_addr_t instead of bus_size_t for boundary
constraints.
These allow boundary constraints to be fully expressed for cases where
sizeof(bus_addr_t) != sizeof(bus_size_t). Specifically, it allows a
driver to properly specify a 4GB boundary in a PAE kernel.
Note that this cannot be safely MFC'd without a lot of compat shims due
to KBI changes, so I do not intend to merge it.
Reviewed by: scottl
helper since r230632, use these for output and panicing during the
early cycles and move cninit() until after the static per-CPU data
has been set up. This solves a couple of issue regarding the non-
availability of the static per-CPU data:
- panic() not working and only making things worse when called,
- having to supply a special DELAY() implementation to the low-level
console drivers,
- curthread accesses of mutex(9) usage in low-level console drivers
that aren't conditional due to compiler optimizations (basically,
this is the problem described in r227537 but in this case for
keyboards attached via uart(4)). [1]
PR: 164123 [1]
implementing a simple OF_panic() that may be used during the early
cycles when panic() isn't available, yet.
- Mark cpu_{exit,shutdown}() as __dead2 as appropriate.
VM_KMEM_SIZE_SCALE to 2, awaiting more insight from alc@. As it turns
out, the VM apparently has problems with machines that have large holes
in the physical address space, causing the kmem_suballoc() call in
kmeminit() to fail with a VM_KMEM_SIZE_SCALE of 1. Using a value of 2
allows these, namely Blade 1500 with 2GB of RAM, to boot.
PR: 164227
no need to additionally add CPU memory barriers to the acquire variants of
atomic(9), these are documented to also include compiler memory barriers.
So add the latter, which were previously included by using membar(), back.
the 16-bit cylinders field of the VTOC8 disk label (at around 502GB). The
geometry chosen for disks above that limit allows to use disks up to 2TB,
which is the limit of the extended VTOC8 format. The geometry used for
disks smaller than the 16-bit cylinders limit stays the same as used by
cam_calc_geometry(9) for extended translation.
Thanks to Hans-Joerg Sirtl for providing hardware for testing this change.
MFC after: 3 days
directly from g7, the pcpu pointer. This guarantees correct behavior
when the thread migrates to a different CPU.
Commit message stolen from r205431. Additional testing by Peter Jeremy.
MFC after: 3 days
implement a deprecated FPU control interface in addition to the
standard one. To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.
Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware. Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
and pc_pmap for SMP. This is key to allowing adding support for SCHED_ULE.
Thanks go to Peter Jeremy for additional testing.
- Add support for SCHED_ULE to cpu_switch().
Committed from: 201110DevSummit
- Implement bus_adjust_resource() methods as far as necessary and in non-PCI
bridge drivers as far as feasible without rototilling them.
- As NEW_PCIB does a layering violation by activating resources at layers
above pci(4) without previously bubbling up their allocation there, move
the assignment of bus tags and handles from the bus_alloc_resource() to
the bus_activate_resource() methods like at least the other NEW_PCIB
enabled architectures do. This is somewhat unfortunate as previously
sparc64 (ab)used resource activation to indicate whether SYS_RES_MEMORY
resources should be mapped into KVA, which is only necessary if their
going to be accessed via the pointer returned from rman_get_virtual() but
not for bus_space(9) as the later always uses physical access on sparc64.
Besides wasting KVA if we always map in SYS_RES_MEMORY resources, a driver
also may deliberately not map them in if the firmware already has done so,
possibly in a special way. So in order to still allow a driver to decide
whether a SYS_RES_MEMORY resource should be mapped into KVA we let it
indicate that by calling bus_space_map(9) with BUS_SPACE_MAP_LINEAR as
actually documented in the bus_space(9) page. This is implemented by
allocating a separate bus tag per SYS_RES_MEMORY resource and passing the
resource via the previously unused bus tag cookie so we later on can call
rman_set_virtual() in sparc64_bus_mem_map(). As a side effect this now
also allows to actually indicate that a SYS_RES_MEMORY resource should be
mapped in as cacheable and/or read-only via BUS_SPACE_MAP_CACHEABLE and
BUS_SPACE_MAP_READONLY respectively.
- Do some minor cleanup like taking advantage of rman_init_from_resource(),
factor out the common part of bus tag allocation into a newly added
sparc64_alloc_bus_tag(), hook up some missing newbus methods and replace
some homegrown versions with the generic counterparts etc.
- While at it, let apb_attach() (which can't use the generic NEW_PCIB code
as APB bridges just don't have the base and limit registers implemented)
regarding the config space registers cached in pcib_softc and the SYSCTL
reporting nodes set up.
atomic operations behave as if the were followed by a memory barrier so
there's no need to include ones in the acquire variants of atomic(9).
Removing these results a small performance improvement, specifically this
is sufficient to compensate the performance loss seen in the worldstone
benchmark seen when using SCHED_ULE instead of SCHED_4BSD.
This change is inspired by Linux even more radically doing the equivalent
thing some time ago.
Thanks go to Peter Jeremy for additional testing.
This patch is going to help in cases like mips flavours where you
want a more granular support on MAXCPU.
No MFC is previewed for this patch.
Tested by: pluknet
Approved by: re (kib)
the TLBs in order to get rid of the user mappings but instead traverse
them an flush only the latter like we also do for the Spitfire-class.
Also flushing the unlocked kernel entries can cause instant faults which
when called from within cpu_switch() are handled with the scheduler lock
held which in turn can cause timeouts on the acquisition of the lock by
other CPUs. This was easily seen with a 16-core V890 but occasionally
also happened with 2-way machines.
While at it, move the SPARC64-V support code entirely to zeus.c. This
causes a little bit of duplication but is less confusing than partially
using Cheetah-class bits for these.
- For SPARC64-V ensure that 4-Mbyte page entries are stored in the 1024-
entry, 2-way set associative TLB.
- In {d,i}tlb_get_data_sun4u() turn off the interrupts in order to ensure
that ASI_{D,I}TLB_DATA_ACCESS_REG actually are read twice back-to-back.
Tested by: Peter Jeremy (16-core US-IV), Michael Moll (2-way SPARC64-V)
have to ignore it when sending the IPI anyway. Actually I can't think of
a good reason why this ever was done that way in the first place as it's
not even usefull for debugging.
While at it replace the use of pc_other_cpus as it's slated for deorbit.
more than three temporary register in several places CATR() is used so
this code trades instructions in for registers. Actually, this still isn't
sufficient and CATR() has the side-effect of clobbering %y. Luckily, with
the current uses of CATR() this either doesn't matter or we are able to
(save and) restore it.
Now that there's only one use of AND() and TEST() left inline these.
This introduce all the underlying support for making this possible (via
the function cpusetobj_strscan() and keeps ktr_cpumask exported. sparc64
implements its own assembly primitives for tracing events and needs to
properly check it. Anyway the sparc64 logic is not implemented yet due
to lack of knowledge (by me) and time (by marius), but it is just a
matter of using ktr_cpumask when possible.
Tested and fixed by: pluknet
Reviewed by: marius
architectures (i386, for example) the virtual memory space may be
constrained enough that 2MB is a large chunk. Use 64K for arches
other than amd64 and ia64, with special handling for sparc64 due to
differing hardware.
Also commit the comment changes to kmem_init_zero_region() that I
missed due to not saving the file. (Darn the unfamiliar development
environment).
Arch maintainers, please feel free to adjust ZERO_REGION_SIZE as you
see fit.
Requested by: alc
MFC after: 1 week
MFC with: r221853
must not, otherwise we tell the CPU to IPI itself, which the sun4u CPUs don't
support. For reasons unknown so far MD and MI IPI use actually still triggers
that assertion though.
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init(). Consistently define mem_range_softc from
mem.c for all platforms. Add missing #include guards for machine/memdev.h
and sys/memrange.h. Clean up some nearby style(9) nits.
MFC after: 1 month
