After review by the WDC engineers, improve how we pull down the
so-called 'e6' logs. The 'c6' logs are obsolete and support for them
has been removed because FreeBSD needed to pull them in chunks, which
is incompatible with the 0xc6 opcode implementation. Rather than leave
the code in place that produces bad log pulls, remove it.
Process core notes for a 32-bit process running on a 64-bit host need to
use 32-bit structures so that the note layout matches the layout of notes
of a core dump of a 32-bit process under a 32-bit kernel.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D11407
If used with fopen(3)/fdopen(3)-ed FILEs, stdio accurately uses
non-cancellable internal versions of the functions, i.e. it seems to
be fine with regard to cancellation. But if the funopen(3) and
f{r,w}open(3) functions were used to open the FILE, and corresponding
user functions create cancellation points (they typically have no
other choice), then stdio code at least leaks FILE' lock.
The change installs cleanup handler which unlocks FILE. Some minimal
restructuring of the code was required to make it use common return
place to satisfy hand-rolled pthread_cleanup_pop() requirements.
Noted by: eugen
Reviewed by: eugen, vangyzen
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D11246
struct g_kevent_args.
On some architectures, e.g. PowerPC, there is additional padding in uap.
Reported and tested by: andreast
Sponsored by: The FreeBSD Foundation
ARMv4 or ARMv5, and only support it when it's present on ARMv6 and later.
As such always store the VFP register in setjmp and restore them in
longjmp when building for armv6.
Reviewed by: mmel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11393
The implementation is using fixed size array allocated in asm module,
need to use proper array declaration for C source.
CID: 1376405
Reported by: Coverity, cem
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D11321
which is able to manipulate the clock and data lines directly.
When an i2c bus is hung by a slave device stuck in the middle of a
transaction that didn't complete properly, this function manipulates the
clock and data lines in a sequence known to reliably reset slave devices.
The most common cause of a hung i2c bus is a system reboot in the middle of
an i2c transfer (so it doesnt' happen often, but now there is a way other
than power cycling to recover from it).
nostop option is set, if a start was issued.
The nostop option doesn't mean "never issue a stop" it means "only issue
a stop after the last in a series of transfers". If the transfer ends
due to error, then that was the last transfer in the series, and a stop
is required.
Before this change, any error during a transfer when nostop is set would
effectively hang the bus, because sc->started would never get cleared,
and that caused all future calls to iicbus_start() to return an error
because it looked like the bus was already active. (Unrelated errors in
handling the nostop option, to be addressed separately, could lead to
this bus hang condition even on busses that don't set the nostop option.)
If an NFSv3 server were to reply with weak cache consistency attributes,
but not post operation attributes, the client would use garbage attributes
from memory. This was spotted during work on the code for the NFSv4.1 client.
I have never seen evidence that this happens and it wouldn't make sense
for an NFSv3 server to do this, so this patch is basically "theoretical",
but does fix the problem if a server were to do the above.
PR: 219552
MFC after: 2 weeks
When a pin is set for input the value in the DR will be the same as the PSR.
When a pin is set for output the value in the DR is the value output to the
pad, and the value in the PSR is the actual electrical level sensed on the
pad, and they can be different if the pad is configured for open-drain mode
and some other entity on the board is driving the line low.
group. Change all code points that open-coded this functionality
to use the new function. This commit is a refactoring with no
change in functionality.
In the future this change allows more robust checking of cylinder
group reads along the lines discussed in the hardening UFS session
at BSDCan (retry I/O, add checksums, etc). For more detail see the
session notes at https://wiki.freebsd.org/DevSummit/201706/HardeningUFS
Reviewed by: kib
The implementation of ZFS refcount_t uses the emulated illumos mutex
(the sx lock) and the waiting memory allocation when ZFS_DEBUG is
enabled. This makes refcount_t unsuitable for use in GEOM g_up
thread where sleeping is prohibited.
When importing the ABD change I modified vdev_geom using illumos
vdev_disk as an example. As a result, I added a call to abd_return_buf
in vdev_geom_io_intr. The latter is called on g_up thread while the
former uses refcount_t.
This change fixes the problem by deferring the abd_return_buf call to
the previously unused vdev_geom_io_done that is called on a ZFS zio
taskqueue thread where sleeping is allowed.
A side bonus of this change is that now a vdev zio has a pointer
to its corresponding bio while the zio is active.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Tested by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 1 week
X-MFC with: r320156
This finishes what r245164 started and makes open(..., O_APPEND) work again
after r299753.
- Pass ioflags, incl. IO_APPEND, down to the direct write backend (r245164
added it to only the bio backend).
- (r299753 changed the WRONLY backend from bio to direct.)
PR: 220185
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: bapt@, rmacklem@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11348
The summary of changes is as follows..
Generic changes::
- Added configure support [2].
- Check for lchmod filesystem support with create_file(..); for
testcases that require lchmod, skip the testcase -- otherwise
use chmod directly [1].
- Added Travis CI integration [2].
- Added utimensat testcases [1].
Linux support::
- Fixed Linux support to pass on later supported versions of
Fedora/Ubuntu [2].
- Conditionally enable posix_fallocate(2) support [2].
OSX support::
- Fixed compilation on OSX [2].
- Added partial OSX support (the test run isn't fully green yet)
[2].
MFC after: 2 months
Obtained from: https://github.com/pjd/pjdfstest/tree/0.1
Relnotes: yes
Submitted by: asomers [1], ngie [2]
Tested with: UFS, ZFS
The summary of changes is as follows..
Generic changes::
- Added configure support [2].
- Check for lchmod filesystem support with create_file(..); for
testcases that require lchmod, skip the testcase -- otherwise
use chmod directly [1].
- Added Travis CI integration [2].
- Added utimensat testcases [1].
Linux support::
- Fixed Linux support to pass on later supported versions of
Fedora/Ubuntu [2].
- Conditionally enable posix_fallocate(2) support [2].
OSX support::
- Fixed compilation on OSX [2].
- Added partial OSX support (the test run isn't fully green yet)
[2].
Obtained from: https://github.com/pjd/pjdfstest/tree/0.1
Submitted by: asomers [1], ngie [2]
- Including bsd.own.mk isn't required since no MK_<foo> knobs are being
manipulated.
- Update documentation to note that ${FILES} is installed via bsd.progs.mk,
not bsd.prog.mk.
MFC after: 1 month
- TESTSDIR doesn't need to be specified after r289158.
- Including bsd.own.mk isn't required since no MK_<foo> knobs are being
manipulated.
- TESTS_SUBDIRS should be written out in an append format, one entry
per line, to provide a better, more conflict resistant example.
MFC after: 1 month
In jemalloc 5, there are no longer chunks, and as configured on
FreeBSD (the "retain" option defaults to false), the mmap()
requests are precisely sized for the specific needs, which means
the virtual memory overhead should be lower for small applications.
Reviewed by: jasone, ian
Differential Revision: https://reviews.freebsd.org/D11366
a hint.
Right now, for non-fixed mmap(2) calls, addr is de-facto interpreted
as the absolute minimal address of the range where the mapping is
created. The VA allocator only allocates in the range [addr,
VM_MAXUSER_ADDRESS]. This is too restrictive, the mmap(2) call might
unduly fail if there is no free addresses above addr but a lot of
usable space below it.
Lift this implementation limitation by allocating VA in two passes.
First, try to allocate above addr, as before. If that fails, do the
second pass with less restrictive constraints for the start of
allocation by specifying minimal allocation address at the max bss
end, if this limit is less than addr.
One important case where this change makes a difference is the
allocation of the stacks for new threads in libthr. Under some
configuration conditions, libthr tries to hint kernel to reuse the
main thread stack grow area for the new stacks. This cannot work by
design now after grow area is converted to stack, and there is no
unallocated VA above the main stack. Interpreting requested stack
base address as the hint provides compatibility with old libthr and
with (mis-)configured current libthr.
Reviewed by: alc
Tested by: dim (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the "effective MSS" for the connection. The chip expects it this way.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
If a peripheral driver (e.g. da, sa, cd) is added or removed from the
peripheral driver list while an unrelated peripheral driver instance (e.g.
da0, sa5, cd2) is going away and is inside camperiphfree(), we could
dereference an invalid pointer.
When peripheral drivers are added or removed (see periphdriver_register()
and periphdriver_unregister()), the peripheral driver array is resized
and existing entries are moved.
Although we hold the topology lock while we traverse the peripheral driver
list, we retain a pointer to the location of the peripheral driver pointer
and then drop the topology lock. So we are still vulnerable to the list
getting moved around while the lock is dropped.
To solve the problem, cache a copy of the peripheral driver pointer. If
its storage location in the list changes while we have the lock dropped, it
won't have any effect.
This doesn't solve the issue that peripheral drivers ("da", "cd", as opposed
to individual instances like "da0", "cd0") are not generally part of a
reference counting scheme to guard against deregistering them while there
are instances active. The caller (generally the person unloading a module)
has to be aware of active drivers and not unload something that is in use.
sys/cam/cam_periph.c:
In camperiphfree(), cache a pointer to the peripheral driver
instance to avoid holding a pointer to an invalid memory location
in the event that the peripheral driver list changes while we have
the topology lock dropped.
PR: kern/219701
Submitted by: avg
MFC after: 3 days
Sponsored by: Spectra Logic
Without the allocation length set, the target will either reject
the command or complete it without transferring any data.
This fixes the REPORT ZONES command for SCSI ZBC protocol devices,
as well as ATA ZAC protocol devices that are behind a SCSI to ATA
translation layer. (LSI/Broadcom's 12Gb SAS adapters translate ZBC
commands to ZAC commands.) Those are Host Aware and Host Managed SMR
drives.
This will fix REPORT ZONE commands sent to the da(4) driver via the
GEOM bio interface and zonectl, and REPORT ZONE commands sent from
camcontrol(8).
Note that in the case of camcontrol(8), we currently only send
SCSI ZBC commands to native SCSI protocol devices, not ATA devices
behind a SAT layer.
sys/cam/scsi/scsi_da.c:
Fill in the length field in scsi_zbc_in().
MFC after: 3 days
Sponsored by: Spectra Logic
