o change time to MPSAFE callout
o make debug printfs conditional on DUMMYNET_DEBUG and runtime controllable
by net.inet.ip.dummynet.debug
o make boot-time printf dependent on bootverbose
Sponsored by: FreeBSD Foundation
Special thanks to Pavlin Radoslavov <pavlin@icir.org> for testing and
fixing numerous problems.
Sponsored by: FreeBSD Foundation
Reviewed by: Pavlin Radoslavov <pavlin@icir.org>
Changes from the original implementation:
- Fragmentation is handled by the function m_fragment, which can
be called from whereever fragmentation is needed. Note that this
function is wrapped in #ifdef MBUF_STRESS_TEST to discourage non-testing
use.
- m_fragment works slightly differently from the old fragmentation
code in that it allocates a seperate mbuf cluster for each fragment.
This defeats dma_map_load_mbuf/buffer's feature of coalescing adjacent
fragments. While that is a nice feature in practice, it nerfed the
usefulness of mbuf_stress_test.
- Add two modes of random fragmentation. Chains with fragments all of
the same random length and chains with fragments that are each uniquely
random in length may now be requested.
NB: There is a known LOR on the forwarding path; this needs to be resolved
together with a similar issue in the bridge. For the moment it is
believed to be benign.
Sponsored by: FreeBSD Fondation
returned mbuf can be NULL. Check for NULL in rip_output() when
prepending an IP header. This prevents mbuf exhaustion from
causing a local kernel panic when sending raw IP packets.
PR: kern/55886
Reported by: Pawel Malachowski <pawmal-posting@freebsd.lublin.pl>
MFC after: 3 days
mac_reflect_mbuf_icmp()
mac_reflect_mbuf_tcp()
These entry points permit MAC policies to do "update in place"
changes to the labels on ICMP and TCP mbuf headers when an ICMP or
TCP response is generated to a packet outside of the context of
an existing socket. For example, in respond to a ping or a RST
packet to a SYN on a closed port.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
from queue(3).
Improve vertical compactness by using a IGMP_PRINTF() macro rather
than #ifdefing IGMP_DEBUG a large number of debugging printfs.
Reviewed by: mdodd (SLIST changes)
specific interfaces. This is required by aodvd, and may in future help us
in getting rid of the requirement for BPF from our import of isc-dhcp.
Suggested by: fenestro
Obtained from: BSD/OS
Reviewed by: mini, sam
Approved by: jake (mentor)
of bw_meter entries were processed up to one second ahead.
After an unappropriate rescheduling of some of the bw_meter
entries, the upcalls weren't delivered.
* pim_register_prepare() uses the appropriate sw_csum flag to
call ip_fragment() so the IP checksum is computed properly.
* Modify pim_register_prepare() to take care of IP packets that
don't need fragmentation.
* Add-back in_delayed_cksum() to encap_send(), because it seems it
should be there.
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
segments are lost for the application. This broke, for example,
ports/benchmarks/dbs which needs the SYN segment to filter the
contents of the trace buffer for the connection it is interested in.
This patch makes the SYN segments available again. Unfortunately they
are now associated with the listening socket instead of the new one, so
a change to applications is required, but without this patch it wouldn't
work altogether.
PR: kern/45966
code has rotten a bit so that the header length is not correct at
the point when tcp_trace is called. Temporarily compute the correct
value before the call and restore the old value after. This makes
ports/benchmarks/dbs to almost work.
This is a NOP unless you compile with TCPDEBUG.
in tcp_input that leave the function before hitting the tcp_trace
function call for the TCPDEBUG option. This has made TCPDEBUG mostly
useless (and tools like ports/benchmarks/dbs not working). Add
tcp_trace calls to the return paths that could be identified in this
maze.
This is a NOP unless you compile with TCPDEBUG.
new ATMIOCOPENVCC/CLOSEVCC. This allows us to not only use UBR channels
for IP over ATM, but also CBR, VBR and ABR. Change the format of the
link layer address to specify the channel characteristics. The old
format is still supported and opens UBR channels.
Disabled by default. To enable it, the new "options PIM" must be
added to the kernel configuration file (in addition to MROUTING):
options MROUTING # Multicast routing
options PIM # Protocol Independent Multicast
2. Add support for advanced multicast API setup/configuration and
extensibility.
3. Add support for kernel-level PIM Register encapsulation.
Disabled by default. Can be enabled by the advanced multicast API.
4. Implement a mechanism for "multicast bandwidth monitoring and upcalls".
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
This change allows one to specify almost the complete traffic parameters
for IPoverATM channels through the routing table. Up to now we used
4 byte DL addresses (flag, vpi, vciH, vciL). This format is still allowed.
If the address is longer, however, the 5th byte is interpreted as the
traffic class (UBR, CBR, VBR or ABR) and the remaining bytes are the
parameters for this traffic class:
UBR: 0 byte or 3 byte PCR
CBR: 3 byte PCR
VBR: 3 byte PCR, 3 byte SCR, 3 byte MBS
ABR: 3 byte PCR, 3 byte MCR, 3 byte ICR, 3 byte TBE, 1 byte NRM,
1 byte TRM, 2 bytes ADTF, 1 byte RIF, 1 byte RDF and 1 byte CDF
A script to generate the corresponding 'route add' arguments will follow soon.
sysctl:
- sysctlbyname("net.inet.ip.mfctable", ...)
- sysctlbyname("net.inet.ip.viftable", ...)
This change is needed so netstat can use sysctlbyname() to read
the data from those tables.
Otherwise, in some cases "netstat -g" may fail to report the
multicast forwarding information (e.g., if we run a multicast
router on PicoBSD).
* Bug fix: when sending IGMPMSG_WRONGVIF upcall to the multicast
routing daemon, set properly "im->im_vif" to the receiving
incoming interface of the packet that triggered that upcall
rather than to the expected incoming interface of that packet.
* Bug fix: add missing increment of counter "mrtstat.mrts_upcalls"
* Few formatting nits (e.g., replace extra spaces with TABs)
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
code used to call rtrequest(RTM_DELETE, ...). This is a problem, because
the function that just has called us (route_output)
is not really happy with the route it just is creating beeing ripped out
from under it. Unfortunately we also cannot return an error from
ifa_rtrequest. Therefore mark the route just as RTF_REJECT.
check for raw IP system management operations is often (although
not always) implicit due to the namespacing of raw IP sockets. I.e.,
you have to have privilege to get a raw IP socket, so much of the
management code sitting on raw IP sockets assumes that any requests
on the socket should be granted privilege.
Obtained from: TrustedBSD Project
Product of: France
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.
This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.
sbin/ipfw changes to allow manipulation of set 31 will follow shortly.
Suggested by: Paul Richards
lastest rev of the spec. Use an explicit flag for Fast Recovery. [1]
Fix bug with exiting Fast Recovery on a retransmit timeout
diagnosed by Lu Guohan. [2]
Reviewed by: Thomas Henderson <thomas.r.henderson@boeing.com>
Reported and tested by: Lu Guohan <lguohan00@mails.tsinghua.edu.cn> [2]
Approved by: Thomas Henderson <thomas.r.henderson@boeing.com>,
Sally Floyd <floyd@acm.org> [1]
Since we already had 'O_NOP' instructions which always match, all
I needed to do is allow the NOP command to have arbitrary length
(i.e. move its label in a different part of the switch() which
validates instructions).
The kernel must know nothing about comments, everything else is
done in userland (which will be described in the upcoming ipfw2.c
commit).
support matching a list of addr/mask pairs so one can write
more efficient rulesets which were not possible before e.g.
add 100 skipto 1000 not src-ip 10.0.0.0/8,127.0.0.1/8,192.168.0.0/16
The change is fully backward compatible.
ipfw2 and manpage commit to follow.
MFC after: 3 days
Should work with both regular and fast ipsec (mutually exclusive).
See manpage for more details.
Submitted by: Ari Suutari (ari.suutari@syncrontech.com)
Revised by: sam
MFC after: 1 week
"ipid" options. This feature has been requested by several users.
On passing, fix some minor bugs in the parser. This change is fully
backward compatible so if you have an old /sbin/ipfw and a new
kernel you are not in trouble (but you need to update /sbin/ipfw
if you want to use the new features).
Document the changes in the manpage.
Now you can write things like
ipfw add skipto 1000 iplen 0-500
which some people were asking to give preferential treatment to
short packets.
The 'MFC after' is just set as a reminder, because I still need
to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately
change the size of certain kernel structures; not that it matters
a lot since ipfw2 is entirely optional and not the default...)
PR: bin/48015
MFC after: 1 week
this makes connect act more sensibly in these cases.
PR: 50839
Submitted by: Barney Wolff <barney@pit.databus.com>
Patch delayed by laziness of: silby
MFC after: 1 week
is not called, and no static rules match an outgoing packet, the
latter retains its source IP address. This is in support of the
"static NAT only" mode.
only meaningful for fragments. Also don't bother to byte-swap the
ip_id when we do generate it; it is only used at the receiver as a
nonce. I tried several different permutations of this code with no
measurable difference to each other or to the unmodified version, so
I've settled on the one for which gcc seems to generate the best code.
(If anyone cares to microoptimize this differently for an architecture
where it actually matters, feel free.)
Suggested by: Steve Bellovin's paper in IMW'02
sure that the MAC label on TCP responses during TIMEWAIT is
properly set from either the socket (if available), or the mbuf
that it's responding to.
Unfortunately, this is made somewhat difficult by the TCP code,
as tcp_twstart() calls tcp_twrespond() after discarding the socket
but without a reference to the mbuf that causes the "response".
Passing both the socket and the mbuf works arounds this--eventually
it might be good to make sure the mbuf always gets passed in in
"response" scenarios but working through this provided to
complicate things too much.
Approved by: re (scottl)
Reviewed by: hsu
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
copying for mbuf headers now works properly in m_dup_pkthdr(), so
we don't need to do an explicit copy.
Approved by: re (jhb)
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
state. Those changed attempted to work around the changed invariant
that inp->in_socket was sometimes now NULL, but the logic wasn't
quite right, meaning that inp->in_socket would be dereferenced by
cr_canseesocket() if security.bsd.see_other_uids, jail, or MAC
were in use. Attempt to clarify and correct the logic.
Note: the work-around originally introduced with the reduced TCP
wait state handling to use cr_cansee() instead of cr_canseesocket()
in this case isn't really right, although it "Does the right thing"
for most of the cases in the base system. We'll need to address
this at some point in the future.
Pointed out by: dcs
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
doing Limited Transmit. Only artificially inflate the congestion
window by 1 segment instead of the usual 3 to take into account
the 2 already sent by Limited Transmit.
Approved in principle by: Mark Allman <mallman@grc.nasa.gov>,
Hari Balakrishnan <hari@nms.lcs.mit.edu>, Sally Floyd <floyd@icir.org>
(See: ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt)
This fulfills the host requirements for userland support by
way of the setsockopt() IP_EVIL_INTENT message.
There are three sysctl tunables provided to govern system behavior.
net.inet.ip.rfc3514:
Enables support for rfc3514. As this is an
Informational RFC and support is not yet widespread
this option is disabled by default.
net.inet.ip.hear_no_evil
If set the host will discard all received evil packets.
net.inet.ip.speak_no_evil
If set the host will discard all transmitted evil packets.
The IP statistics counter 'ips_evil' (available via 'netstat') provides
information on the number of 'evil' packets recieved.
For reference, the '-E' option to 'ping' has been provided to demonstrate
and test the implementation.
Quote from kern/37573:
There is an obvious race in netinet/ip_dummynet.c:config_pipe().
Interrupts are not blocked when changing the params of an
existing pipe. The specific crash observed:
... -> config_pipe -> set_fs_parms -> config_red
malloc a new w_q_lookup table but take an interrupt before
intializing it, interrupt handler does:
... -> dummynet_io -> red_drops
red_drops dereferences the uninitialized (zeroed) w_q_lookup
table.
o Flush accumulated credits for idle pipes.
o Flush accumulated credits when change pipe characteristics.
o Change dn_flow_queue.numbytes type to unsigned long.
Overlapping dn_flow_queue->numbytes in ready_event() leads to
numbytes becomes negative and SET_TICKS() macro returns a very
big value. heap_insert() overlaps dn_key again and inserts a
queue to a ready heap with a sched_time points to the past.
That leads to an "infinity" loop.
PR: kern/33234, kern/37573, misc/42459, kern/43133,
kern/44045, kern/48099
Submitted by: Mike Hibler <mike@cs.utah.edu> (kern/37573)
MFC after: 6 weeks
additional flags argument to indicate blocking disposition, and
pass in M_NOWAIT from the IP reassembly code to indicate that
blocking is not OK when labeling a new IP fragment reassembly
queue. This should eliminate some of the WITNESS warnings that
have started popping up since fine-grained IP stack locking
started going in; if memory allocation fails, the creation of
the fragment queue will be aborted.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- Don't try to fragment the packet if it's smaller than mbuf_frag_size.
- Preserve the size of the mbuf chain which is modified by m_split().
- Check that m_split() didn't return NULL.
- Make it so we don't end up with two M_PKTHDR mbuf in the chain.
- Use m->m_pkthdr.len instead of m->m_len so that we fragment the whole
chain and not just the first mbuf.
- Fix a nearby style bug and rework the logic of the loops so that it's
more clear.
This is still not quite right, because we're clearly abusing m_split() to
do something it was not designed for, but at least it works now. We
should probably move this code into a m_fragment() function when it's
correct.
allows you to tell ip_output to fragment all outgoing packets
into mbuf fragments of size net.inet.ip.mbuf_frag_size bytes.
This is an excellent way to test if network drivers can properly
handle long mbuf chains being passed to them.
net.inet.ip.mbuf_frag_size defaults to 0 (no fragmentation)
so that you can at least boot before your network driver dies. :)
comes in on is the same interface that we would route out of to get to
the packet's source address. Essentially automates an anti-spoofing
check using the information in the routing table.
Experimental. The usage and rule format for the feature may still be
subject to change.
drain routines are done by swi_net, which allows for better queue control
at some future point. Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.
Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
that matches snd_max, then do not respond with an ack, just drop the
segment. This fixes a problem where a simultaneous close results in
an ack loop between two time-wait states.
Test case supplied by: Tim Robbins <tjr@FreeBSD.ORG>
Sponsored by: DARPA, NAI Labs
tcpcb is NULL, but also its connected inpcb, since we now allow
elements of a TCP connection to hang around after other state, such
as the socket, has been recycled.
Tested by: dcs
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Security improvements:
- Increase the size of each syncookie secret from 32 to 128 bits
in order to make brute force attacks on the secrets much more
difficult.
- Always return the lowest order dword from the MD5 hash; this
allows us to expose 2 more bits of the cookie and makes ACK
floods which seek to guess the cookie value more difficult.
Performance improvements:
- Increase the lifetime of each syncookie from 4 seconds to 16
seconds. This increases the usefulness of syncookies during
an attack.
- From Yahoo!: Reduce the number of calls to MD5Update; this
results in a ~17% increase in cookie generation time here.
Reviewed by: hsu, jayanth, jlemon, nectar
MFC After: 15 seconds
packets coming out of a GIF tunnel are re-processed by ipfw, et. al.
By default they are not reprocessed. With the option they are.
This reverts 1.214. Prior to that change packets were not re-processed.
After they were which caused problems because packets do not have
distinguishing characteristics (like a special network if) that allows
them to be filtered specially.
This is really a stopgap measure designed for immediate MFC so that
4.8 has consistent handling to what was in 4.7.
PR: 48159
Reviewed by: Guido van Rooij <guido@gvr.org>
MFC after: 1 day
and enable it by default, with a limit of 16.
At the same time, tweak maxfragpackets downward so that in the worst
possible case, IP reassembly can use only 1/2 of all mbuf clusters.
MFC after: 3 days
Reviewed by: hsu
Liked by: bmah
OSes has probably caused more problems than it ever solved. Allow the
user to retire the old behavior by specifying their own privileged
range with,
net.inet.ip.portrange.reservedhigh default = IPPORT_RESERVED - 1
net.inet.ip.portrange.reservedlo default = 0
Now you can run that webserver without ever needing root at all. Or
just imagine, an ftpd that can really drop privileges, rather than
just set the euid, and still do PORT data transfers from 20/tcp.
Two edge cases to note,
# sysctl net.inet.ip.portrange.reservedhigh=0
Opens all ports to everyone, and,
# sysctl net.inet.ip.portrange.reservedhigh=65535
Locks all network activity to root only (which could actually have
been achieved before with ipfw(8), but is somewhat more
complicated).
For those who stick to the old religion that 0-1023 belong to root and
root alone, don't touch the knobs (or even lock them by raising
securelevel(8)), and nothing changes.
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.
Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
routine does not require a tcpcb to operate. Since we no longer keep
template mbufs around, move pseudo checksum out of this routine, and
merge it with the length update.
Sponsored by: DARPA, NAI Labs
- delay acks for T/TCP regardless of delack setting
- fix bug where a single pass through tcp_input might not delay acks
- use callout_active() instead of callout_pending()
Sponsored by: DARPA, NAI Labs
cr_uid.
Note: we do not have socheckuid() in RELENG_4, ip_fw2.c uses its
own macro for a similar purpose that is why ipfw2 in RELENG_4 processes
uid rules correctly. I will MFC the diff for code consistency.
Reported by: Oleg Baranov <ol@csa.ru>
Reviewed by: luigi
MFC after: 1 month
ipsec4_process_packet; they happen when a packet is dropped because
an SA acquire is initiated
Submitted by: Doug Ambrisko <ambrisko@verniernetworks.com>
you still don't want to use the two together, but it's ok to have
them in the same kernel (the problem that initiated this bandaid
has long since been fixed)
initialized until after a syncookie was generated. As a result,
all connections resulting from a returned cookie would end up using
a MSS of ~512 bytes. Now larger packets will be used where possible.
MFC after: 5 days
- Honor the previous behavior of maxfragpackets = 0 or -1
- Take a better stab at fragment statistics
- Move / correct a comment
Suggested by: maxim@
MFC after: 7 days
functions implemented approximately the same limits on fragment memory
usage, but in different fashions.)
End user visible changes:
- Fragment reassembly queues are freed in a FIFO manner when maxfragpackets
has been reached, rather than all reassembly stopping.
MFC after: 5 days
in addition to secure level 1. The mask supports up to a secure level of 8
but only add defines through CTLFLAG_SECURE3 for now.
As per the missif in the log entry for 1.11 of ip_fw2.c which added the
secure flag to the IPFW sysctl's in the first place, change the secure
level requirement from 1 to 3 now that we have support for it.
Reviewed by: imp
With Design Suggestions by: imp
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a "copy" operation. This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain. This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.
These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block. This
introduces an incompatibility with openbsd which we may want to revisit.
Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them. We may want to support this;
for now we watch for it with an assert.
Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.
Supported by: Vernier Networks
Reviewed by: Robert Watson <rwatson@FreeBSD.org>
Note that the original RFC 1323 (PAWS) says in 4.2.1 that the out of
order / reverse-time-indexed packet should be acknowledged as specified
in RFC-793 page 69 then dropped. The original PAWS code in FreeBSD (1994)
simply acknowledged the segment unconditionally, which is incorrect, and
was fixed in 1.183 (2002). At the moment we do not do checks for SYN or FIN
in addition to (tlen != 0), which may or may not be correct, but the
worst that ought to happen should be a retry by the sender.
in network byte order, but icmp_error() expects the IP header to
be in host order and the code here did not perform the necessary
swapping for the bridged case. This bug causes an "icmp_error: bad
length" panic when certain length IP packets (e.g. ip_len == 0x100)
are rejected by the firewall with an ICMP response.
MFC after: 3 days
associated with the syncache entry: in case tcp_close() has been
called on the corresponding listening socket, the lock has been
destroyed as a side effect of in_pcbdetach(), causing a panic when
we attempt to lock on it.
Reviewed by: hsu
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
bpf_alloc() and pass the 'canwait' flag(s) along. It's been changed
to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
flag (and only one of those two).
Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)
apparent ack-on-ack problem with FreeBSD. Prof. Jacobson noticed a
case in our TCP stack which would acknowledge a received ack-only packet,
which is not legal in TCP.
Submitted by: Van Jacobson <van@packetdesign.com>,
bmah@packetdesign.com (Bruce A. Mah)
MFC after: 7 days
bridge.c nor if_ethersubr.c depend on IPFIREWALL.
Restore the use of fw_one_pass in if_ethersubr.c
ipfw.8 will be updated with a separate commit.
Approved by: re
so that it can be reused elsewhere (there is a number of places
where it can be useful). This also trims some 200 lines from
the body of ip_output(), which helps readability a bit.
(This change was discussed a few weeks ago on the mailing lists,
Julian agreed, silence from others. It is not a functional change,
so i expect it to be ok to commit it now but i am happy to back it
out if there are objections).
While at it, fix some function headers and replace m_copy() with
m_copypacket() where applicable.
MFC after: 1 week
Replace m_copy() with m_copypacket() where applicable.
Replace "if (a.s_addr ...)" with "if (a.s_addr != INADDR_ANY ...)"
to make it clear what the code means.
While at it, fix some function headers and remove 'register' from
variable declarations.
MFC after: 3 days
No functional changes, but:
+ the mrouting module now should behave the same as the compiled-in
version (it did not before, some of the rsvp code was not loaded
properly);
+ netinet/ip_mroute.c is now truly optional;
+ removed some redundant/unused code;
+ changed many instances of '0' to NULL and INADDR_ANY as appropriate;
+ removed several static variables to make the code more SMP-friendly;
+ fixed some minor bugs in the mrouting code (mostly, incorrect return
values from functions).
This commit is also a prerequisite to the addition of support for PIM,
which i would like to put in before DP2 (it does not change any of
the existing APIs, anyways).
Note, in the process we found out that some device drivers fail to
properly handle changes in IFF_ALLMULTI, leading to interesting
behaviour when a multicast router is started. This bug is not
corrected by this commit, and will be fixed with a separate commit.
Detailed changes:
--------------------
netinet/ip_mroute.c all the above.
conf/files make ip_mroute.c optional
net/route.c fix mrt_ioctl hook
netinet/ip_input.c fix ip_mforward hook, move rsvp_input() here
together with other rsvp code, and a couple
of indentation fixes.
netinet/ip_output.c fix ip_mforward and ip_mcast_src hooks
netinet/ip_var.h rsvp function hooks
netinet/raw_ip.c hooks for mrouting and rsvp functions, plus
interface cleanup.
netinet/ip_mroute.h remove an unused and optional field from a struct
Most of the code is from Pavlin Radoslavov and the XORP project
Reviewed by: sam
MFC after: 1 week
ipfw_flow_id structure actual size and bcmp(3) may fail to compare
them properly. Compare members of these structures instead.
PR: kern/44078
Submitted by: Oleg Bulyzhin <oleg@rinet.ru>
Reviewed by: luigi
MFC after: 2 weeks
o fix #ifdef typo
o must use "bounce functions" when dispatched from the protosw table
don't know how this stuff was missed in my testing; must've committed
the wrong bits
Pointy hat: sam
Submitted by: "Doug Ambrisko" <ambrisko@verniernetworks.com>
prediction code. Previously, 2GB worth of header predicted data
could leave these variables too far out of sequence which would cause
problems after receiving a packet that did not match the header
prediction.
Submitted by: Bill Baumann <bbaumann@isilon.com>
Sponsored by: Isilon Systems, Inc.
Reviewed by: hsu, pete@isilon.com, neal@isilon.com, aaronp@isilon.com
