Commit Graph

754 Commits

Author SHA1 Message Date
Bruce Evans
7111303d00 Removed all `vector xxxintr' specifications. Interrupt handlers are now
configured in drivers.

Fixed quoting of IO_ASC1.
1998-10-22 14:17:44 +00:00
Bruce Evans
f462839903 Removed all `vector xxxintr' specifications. Interrupt handlers are now
configured in drivers.
1998-10-22 14:12:55 +00:00
Bruce Evans
5985d44e83 Removed all `vector xxxintr' specifications. Interrupt handlers are now
configured in drivers.

Use the correct macro in configuration declarations.  .Cm somehow gave
the same results as .Cm.
1998-10-22 13:01:19 +00:00
Kenneth D. Merry
a831a06cfb Add the dpt(4) man page.
Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 22:00:55 +00:00
Kenneth D. Merry
98deb70241 Update the bt(4) man page for CAM.
Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 21:33:34 +00:00
Kenneth D. Merry
976f6cbd90 Add in the adv(4) and adw(4) man pages for the AdvanSys narrow and wide
SCSI controllers, respectively.

Once these drivers are tested on the alpha, these man pages can probably be
moved up a directory to reflect the fact that they're architecture
independent.

An mdoc guru should probably look at the AUTHORS sections in both of these
pages -- the .An macro seems to cause strange spacing problems.

Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 21:12:07 +00:00
Justin T. Gibbs
0effaa9f7e Update to include all supported chips.
Add a table comparing the features of all aic7xxx chips.

Clean up the discussion of SCB paging.

Reviewed by:	Kenneth Merry <ken@FreeBSD.org>
1998-10-16 15:06:26 +00:00
Kenneth D. Merry
c88131e709 Update the aha(4) and ahb(4) man pages for CAM.
Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 04:41:38 +00:00
Kenneth D. Merry
89045423f1 Update the scsi(4) man page for CAM, and add in links so that it appears
as cam(4) as well.

This includes a description of all the generic CAM kernel options, as
well as a description of some of the CAM debugging printf options.
1998-10-16 04:28:39 +00:00
Kenneth D. Merry
190831dd81 Update the sa(4) man page for CAM. This was repository-copied from the
st(4) man page.

Take out most of the sd(4) and st(4) man pages and point to the new
da(4) and sa(4) man pages.

Add sa.4 to the makefile.

Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 04:06:21 +00:00
Kenneth D. Merry
d754856115 Add the da(4) man page. 1998-10-16 03:29:49 +00:00
Kenneth D. Merry
c70e20d81a Update the da(4) man page for CAM. The da.4 man page was repository-copied
from the sd.4 man page.

This includes a discussion of write caching and its effects.

Reviewed by:	ken
Submitted by:	gibbs
1998-10-16 03:28:12 +00:00
Kenneth D. Merry
de336449f3 Change the worm(4) man page to note that there is no longer a worm(4)
driver, and point users in the right direction for similar functionality.
The functionality that used to be provided there is now provided by the
cd(4) driver and cdrecord.

Fix cross-references in a few other man pages.  (i.e. delete references to
things I haven't written yet)
1998-10-16 00:26:28 +00:00
Warner Losh
068a441ad2 Add wst.4 1998-10-15 20:45:57 +00:00
Warner Losh
278f786595 Man page for the wst driver. I had planned on committing this earlier,
but forgot.
1998-10-15 20:43:25 +00:00
Wolfram Schneider
0e67e2031b Added reference to ifconfig(8). 1998-10-15 20:36:55 +00:00
Wolfram Schneider
6bede6b481 Added manpage link plip.4 -> lp.4 1998-10-15 20:35:28 +00:00
Wolfram Schneider
7007efd40c Add reference to lp(4). 1998-10-15 20:27:26 +00:00
Kenneth D. Merry
e6c744a084 Update the cd(9) man page for the CAM cd driver. This really just an
update of the quirk entry descriptions to reflect the current state of
things.

Once I find out where such things belong, I'll document things like
the changer scheduling mechanism, actions taken at probe, etc.
1998-10-12 04:09:49 +00:00
Kenneth D. Merry
2d8eb2c034 Update the cd(4) man page for the CAM cd driver.
This includes a description of the changer timeout kernel options and
sysctl variables.  I didn't check to make sure the ioctl descriptions are
up to date; that will come sometime later.  (The ioctls haven't changed in
the CAM driver, but I'm not sure if the man page was in sync with even the
old driver.)
1998-10-12 03:27:51 +00:00
Kenneth D. Merry
979df6777e Add a man page for the transport layer driver.... my last commit blew up in the
middle of adding this file...
1998-10-12 00:31:42 +00:00
Kenneth D. Merry
ce79705e73 Add man pages for the passthrough driver and the CAM transport layer
driver.
1998-10-12 00:26:03 +00:00
Dag-Erling Smørgrav
5a948e4ba7 While I'm at it, remove the tickadj manpage from src/share/man0/man8,
though I'm afraid there's a lot more that needs fixing in this file,
judging by 'find /usr/src -name "*.8" -print'.

Spotted-by:	glimpse -H /usr/src tickadj
1998-10-08 18:52:17 +00:00
Dag-Erling Smørgrav
b354705227 Remove all references to tickadj(8) from rc, rc.conf and rc.conf.5.
Disable building tickadj(8) by removing util from SUBDIR in the xntpd
Makefile. Note that the sources are still there and tickadj can still
be built and installed by doing:

# cd /usr/src/usr.sbin/xntpd/util
# make all install

There are enough references to tickadj in e.g. the xntpd documentation
(not to mention the sysctl variables it uses etc.) that I don't feel
up to implementing the final solution right now.

Kinda-approved-by:	phk
1998-10-08 18:47:30 +00:00
Poul-Henning Kamp
7d5c779c86 Here are some scripts and man pages for configuring HARP ATM
interfaces.

Reviewed by:	phk
Submitted by:	Mike Spengler <mks@networkcs.com>
1998-10-06 19:24:31 +00:00
Greg Lehey
8814fd974a Bring man page up to date 1998-09-29 10:26:02 +00:00
Eivind Eklund
74c6d86921 Add a section on vnode types. Mostly based on information supplied by
Terry Lambert <terry@lambert.org>
1998-09-28 23:36:35 +00:00
Greg Lehey
6d07e4c64d Include vinum.4 in MAN4 1998-09-28 02:59:56 +00:00
Greg Lehey
ac2143fc96 Man page for vinum--initial import 1998-09-28 02:06:21 +00:00
Eivind Eklund
c78f3f0d75 Add a manpage for namei().
Markup changes and review by:	dfr
1998-09-27 13:35:49 +00:00
Joseph Koshy
721df085fe Added names of additional controller chips supported by the NCR driver
to the manual page.

PR: 	7967
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
1998-09-18 04:36:48 +00:00
Justin T. Gibbs
fb43a2ea5d Add devstat.9. 1998-09-15 10:26:57 +00:00
Justin T. Gibbs
b7ae50c0d9 Document new volume tag and element status support. 1998-09-15 10:26:24 +00:00
Justin T. Gibbs
a8abf21632 Add a new at_shutdown queue, SHUTDOWN_FINAL. This queue is run at
splhigh() after any system dumps have completed.  SHUTDOWN_POST_SYNC
isn't quite late enough for disk controllers.
1998-09-15 08:48:57 +00:00
Justin T. Gibbs
c61d88e026 Man page describing the in kernel device statistics routines.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 06:49:18 +00:00
Alexander Langer
d4a76feb0a Added pthread read/write locks. 1998-09-12 13:53:58 +00:00
Alexander Langer
c0e366326f Implement pthread read/write locks as defined by Version 2 of the Single
UNIX Specification.

As with our standard mutexes, process shared locks are not supported at
this time.
1998-09-07 19:01:43 +00:00
Doug Rabson
cefd51ec44 Add manpages for the new device framework. 1998-09-03 21:52:05 +00:00
Wolfram Schneider
acd8019083 Sort cross references. 1998-08-31 16:41:09 +00:00
Joseph Koshy
842d977707 Remove identity crisis in ispcvt(8) man page. Include reference to
ispcvt(8) in pcvt(4).

PR: docs/7743
Submitted by: <k-horik@yk.rim.or.jp>
1998-08-26 02:46:24 +00:00
Joseph Koshy
5a3eb871a7 Add "pcm.4" to Makefile.
PR: 7636
Submitted by: <Janick.Taillandier@ratp.fr>
1998-08-19 01:54:13 +00:00
Bruce Evans
e587e32f15 Fixed order and formatting. 1998-08-17 16:39:07 +00:00
Bill Paul
fc164cbc0f Ack! I edited the MLINKS entry but forgot to add xl.4 to the MAN$=
line. *hangs head in shame*
1998-08-16 19:54:20 +00:00
Bill Paul
ffcc5b5933 Whoops... really add the man page and update the Makefile this
time.
1998-08-16 17:19:58 +00:00
Jordan K. Hubbard
615e5e1586 New man page for pcm(4) driver. Me, I think this is more likely
generic and should go one level up, but it can keep the sb(4) man
page company for now until somebody moves all the no-longer-x86-specific
driver man pages up some day.
Submitted by:	luigi
1998-08-09 19:42:53 +00:00
Bruce Evans
cec5d8b382 FIxed missing include in synopsis. 1998-08-03 17:29:44 +00:00
Bruce Evans
99b4f8244c FIxed bitrot in prototype in synopsis. 1998-08-03 17:27:41 +00:00
Bruce Evans
30b854394a Changed prototype in synopsis to match prototype in <pthread.h>. 1998-08-03 16:54:51 +00:00
Alexander Langer
8ac3b85e63 The pthreads standard has been published. Change:
...is expected to conform to IEEE (``POSIX'') Std 1003.1c when it is
   published.
to:
   ...conforms to ISO/IEC 9945-1 ANSI/IEEE (``POSIX'') Std 1003.1 Second
   Edition 1996-07-12.

Discussed with:	jb
1998-08-03 00:58:37 +00:00
Poul-Henning Kamp
1fbdc08dfe I've put together man pages for the pthread_cleanup, pthread_cond, and
pthread_mutex routines. I've also tweaked pthread_create.3 to point to
pthread_cleanup_push(3) and pthread_cleanup_pop(3).

PR:		7450
Submitted by:	Brian Cully <shmit@kublai.com>
1998-07-31 09:09:19 +00:00