Formerly, there were limits on both the number of files (hard-coded into
the program) and the number of characters (because of the ARG_MAX limit
in exec(2)). In this new version, the filenames are passed to tar through
a pipe, using tar's "-T" option, rather than on the command line.
- Improve support for multiple domains. (In preparation for new rpc.yppasswdd.)
yp_dblookup.c:
- Improve error reporting: be more selective as to what error code
we return when a (dbp->get) fails.
- Don't do longjmp()s from inside a signal handler. Even though I got
things to work the way I wanted, it's bad karma.
- Remember to clear the sa_mask with sigemptyset() before masking signals
when using sigaction() to set up the SIGIO handler.
- Break out of the wait loop in yppush_exit() when the five minute
timeout expires instead of looping around for another pass. If ypxfr
on the other end fails somehow and never sends a response, we don't
want to wait around forever.
ppp based on these patches for about 3 weeks with no downtime.
The original submitters comments:
Two features iijppp has over kernel ppp that I like are predictor1
compression and demand dialing. Here are a few bug fixes.
I expanded the priority queueing scheme and discovered it was broken
due to the assignment at ip.c line 300. All packets were being
queued at the same priority.
Fixing priority queueing broke predictor1 compression. Packets
were compressed before being queued and predictor1 worked as long
as the packets were popped off the queue in the same order they
were pushed onto the queue.
There were a few byte order problems in IP header tests also.
There is a recursion problem in SendLqrReport(). LcpClose() is
called when "Too many echo packets are lost" which winds up in
SendLqrReport() again. I believe the original intention was to
just stop the LQR timer with the call to StopLqr() but the side
effects hurt.
Submitted by: John Capo <jc@irbs.com>
require kmem access. It is currently configured to call getloadavg(3),
which uses sysctl(2) to determine the load average, which is the
only reason some sendmails require kmem access.
from args, e.g. cdplay cd0 "play 1 99" if you just want to feed the
CD a command and exit the cdplay utility. Note that if you want to use
post-play commands like `pause' and `resume', you should still use cdplay
interactively.
1) correct MAX_PID according to system definition.
2) replace fprintf(stderr,...)/perror/exit by 4.4 equivalence.
3) make strings enough larger so they can't overflow: MAXHOSTNAMELEN for
host and MAXPATHLEN for filenames.
4) call execl with correct parameters (compress -> gzip).
This program does what the old one did, PLUS:
- Supports parallel jobs (like the SunOS yppush)
- Does everything in one proces instead of fork()ing off
children processes as callback listeners (this is done
using async socket I/O).
- Can be used to transmit maps to user-specified hosts.
- Has a much more verbose verbose option.
- Reuses existing code from ypserv and ypxfr.
- Uses some rpcgen-erated code as well.
- Isn't fattening. :)
Note that this is going in /usr/sbin rather than /usr/bin like
the old one. yppush is an administrative command it it's anything.
In yp_server.c:
- Modify ypproc_xfr_2_svc() so that it sends both a return status and
a yppush callback (if necessary: normally ypxfr is supposed to send the
callback once it's done transfering a map, but if we can't get ypxfr
off the ground for some reason, we have to send it here instead) and
do it in the right order: have to send the reply to the ypproc_xfr
request first, then send callback. This requires us to cheat a bit:
you're supposed to just return() and let the RPC dispatcher send
the reply for you, but we wouldn't be able to send the callback message
if we did that, so we have to call svc_sendreply() ourselves, then
send the callback, and then return NULL so that the RPC dispatcher
won't call svc_sendreply() itself.
- Also modify ypproc_xfr_2_svc() so that it doesn't invoke ypxfr with
the -f flag: this overrides the order number checks, which prevents
us from ever refusing maps that aren't newer than then ones we already
have.
In yp_access.c:
- Fix a typo in the TCP_WRAPPER support code (which is #ifdef'ed out
by default): a close paren somehow vanished into the ether.
added "#define PRECISE_SYMLINKS" to the amd config header - this
solves a problem with the amd "-type:=direct" mounts and /bin/sh
giving a "readlink failed" if you cd'ed to a "-type:=direct" mounted
directory
i got this from david mazieres as a result of giving him our (mostly
doug rabsons) fixes for the amd "-type:=direct" mounts and telling
them (also some NetBSD people were interested) about my only problem
running these fixes (which is now solved too :-)
This will make FreeBSD boxes better behaved 'MBONE Citizens', based on
a couple of the comments about the severity of fixes..
Agreed to by: wollman, fenner@parc.xerox.com
conflict markers, but it actually changes nothing.
We've been running this code with small changes for some time, this may
be useful for checking what those changes. It was unfortunate this
module got so far away from the vendor branch (whitespace changes didn't
help)
imported the newsyslog command from NetBSD - it make the "rotation" of
the logfiles much simpler (it is currently done by "hand" in the
/etc/[daily,weekly,monthly] scripts) - now it will be done by invoking
newsyslog every hour which is very customizable via a
/etc/newsyslog.conf file
Document /var/log/sup.rename instead of the old name
Couple of lib build cleanups (like, not installing the library, and clean
all files)
It should be safe now.. :-)
looking at a high resolution clock for each of the following events:
function call, function return, interrupt entry, interrupt exit,
and interesting branches. The differences between the times of
these events are added at appropriate places in a ordinary histogram
(as if very fast statistical profiling sampled the pc at those
places) so that ordinary gprof can be used to analyze the times.
gmon.h:
Histogram counters need to be 4 bytes for microsecond resolutions.
They will need to be larger for the 586 clock.
The comments were vax-centric and wrong even on vaxes. Does anyone
disagree?
gprof4.c:
The standard gprof should support counters of all integral sizes
and the size of the counter should be in the gmon header. This
hack will do until then. (Use gprof4 -u to examine the results
of non-statistical profiling.)
config/*:
Non-statistical profiling is configured with `config -pp'.
`config -p' still gives ordinary profiling.
kgmon/*:
Non-statistical profiling is enabled with `kgmon -B'. `kgmon -b'
still enables ordinary profiling (and distables non-statistical
profiling) if non-statistical profiling is configured.
- Add a ypxfr_callback() function that we can use to signal failure to
yppush(8) in the event that we can't fork()/exec() ypxfr(8). yppush
only checks the return status from YPPROC_XFR enough to determine
that the RPC succeded: it relies on its callback service to figure
out whether or not the transfer actually worked.
- Give yp_dblookup.c its own debug variable (ypdb_debug) so that DB
access debugging messages can be turned on or off independent of the
program's global debug messages.
- Have the Makefile rpcgen the ypushresp_xfr_1() client stub for us and
nuke the unneeded rule for yp_xdr.c that I left in by mistake (the XDR
filters live in libc now).
equivalent to the old ypserv, except that it doesn't support the
-p [port] option to force the server to use a particular port.
The server stubs and yp.h header file are auto-generated from the yp.x
protocol definition file. The auto-generated XDR routines in libc/yp
are also used. The database access code has been broken out into a
seperate module so that other NIS utilities (ypxfr in particular)
can use it.
Note that the old mknetid script is being temporarily moved here; it
will be replaced by an mknetid program which will eventually have
a home under /usr/src/libexec. (The existing script is actually
somewhat broken -- it doesn't handle hosts -- but this isn't a big
deal at this point since the netid.byname map is really only useful
fopr Secure RPC, which we don't have yet.)
guys to a watched process. Useful if you're monitoring someone who's
started doing something you'd really like them to stop immediately. :)
Suggested by: Phillip White <philw@megasoft.tic.ab.ca>
spamming of the argv, almost back to the original code (except for NULL
padding of the string).
This makes this version of the sendmail source compile on 2.1.X again.
the argv array, causing parts of the argv[0] to be picked up several times
by libkvm, causing strange ps results for the nfs-server and nfs-master
processes.. :-]
(How many copies of setproctitle() do we need anyway? NetBSD has it in
libc and BSDI have it in libutil.)
Note that this code is dormant unless the options files exist.
Also, parsing of quoted options in the config files is improved.
What this allows, is all the options in LINT to be specified to be
configured as #defines in a file rather than on the CC command line at
kernel build time. This means that 'make depend' will catch dependencies
on actual *options*, meaning that you can run 'config' and 'make depend'
in complete safety WITHOUT removing the compile directory each time.
Unfortunately, this requires a pass over the source to get the individual
files to #include the new .h files that would be generated by config.
This has a small compile time penalty (appears up to about 2% slower)
from a "fresh" build. Of course, you should not be needing to do complete
rebuilds very often once this was completed, so it would be an overall
win for most people.
Since this code is dormant and we've got a lot of other things happening
on the kernel tree at the moment (prototypes, devfs, static declarations
etc) I am not planning on doing any changes to activate this feature just
yet.
sendmail mailing list. Our /etc/rc will be fixed instead.
It seems sendmail becomes more and more incompatible, f.e.
Return-Receipt-To not works anymore :-(
>From jhay@mikom.csir.co.za Mon Dec 4 09:48:12 1995
Subject: Yet another IPXrouted fix
I think these should
should make IPXrouted fairly stable. These last problems only showed when
we had more than one route of the same cost to a net.
This will fix some endless loops in the clone code.
John
--
John Hay -- John.Hay@csir.co.za
Sigh, I really hate this "feature". I'm tempted to comment the test out
(like in sendmail 8.6.xx), especially since we log the info in the
Received: header line anyway.. Doing it like this only makes it painful
for things like uucp..
turn off the read data block timeouts. This was inspired by the same fix
in sendmail-8.7, but the code in this area is somewhat different. (8.7
is much more sensible). This will stop the infamous
"timeout waiting for input during message body read" on long running jobs,
eg: /etc/daily | mail root.
`interesting' feature of syslogd turned up. It calls getbootfile() for each
log entry. Since the kernel makefile now changes kern.bootfile when doing
a 'make install', it's quite startling to see the syslog lines change.
This change makes it call getbootfile() once at startup and cache it,
saving a syscall per loop, and keeping something a little more asthetically
pleasing in /var/log/messages...
Here is some patches to IPXrouted. It does the following:
Always use the sap port in the destination address of sap broadcasts.
Clear the host part of network addresses so that routes will really
be deleted in the kernel.
rather out of date.. it even suggested that it was ppp-2.1.1 still :-)
I've selected some bits from the README files and pre-pended it so that
at least reading it tells you _something_ about the recent history.
o Caution against use of `W' options in label/partition screens (dangerous!)
o Make various types of debugging dreck conditionalize on DEBUG flag
o Make a fake /var/db/mountdbtab file so new system doesn't complain
o Apply uniform permissions to entire /usr/X11R6 tree.
o Set erase character to ^H for all interactive commands.
o Don't panic if user exits upgrade shell, reboot.
o Document dangers of `W' options in help screens also.
Since msdosfs is part of the base system, it's not wise to rely on
something like mtools to provide this functionality.
This utility is the agreed fix for PR # misc/804 fdformat did not ...
