earlier as no one has stepped up to test recent changes to the driver.
Oddly, the module was actually turned on on ia64 though I'm fairly certain
that no ia64 machine has ever had or will ever have an ISA slot.
Axe borrowed from: phk
- if minfd < fd_freefile (as is most often the case, since minfd is
usually 0), set it to fd_freefile.
- remove a call to fd_first_free() which duplicates work already done
by fdused().
This change results in a small but measurable speedup for processes
with large numbers (several thousands) of open files.
PR: kern/85176
Submitted by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
MFC after: 3 weeks
1. The amd64 pmap, unlike the i386 pmap, maintains a reference count
for each page directory (PD) page. However, in the transformation
of the i386 pmap into the amd64 pmap, operations, such as
pmap_copy() and pmap_object_init_pt(), that create 2MB "superpage"
mappings by setting the PG_PS bit in a PD entry were not modified
to adjust the underlying PD page's reference count. Consequently,
superpage mappings could disappear prematurely.
2. pmap_object_init_pt() could crash or corrupt memory if either the
virtual address range being mapped crosses a 1GB boundary in the
virtual address space or nothing is mapped in the 1GB area.
3. When pmap_allocpte() destroys a 2MB "superpage" mapping it does not
reduce the pmap's resident count accordingly. It should. (This
bug is inherited from i386.)
Discussed with: peter
Reviewed by: tegge
not exsist, do not have ioctl return an error, but instead set -1
in the data returned to the user. This allows the HP bios flash
utilities to work without requiring changes to their code.
Reviewed by: jhb
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
(This should really be using m_defrag(), but this diff is just simple
changes for now.)
- Allocate arrays of metadata for the descriptors in the rx and tx rings
and change the ring pointers to walk the metadata array rather than the
actual descriptor rings. Each metadata object contains a pointer to its
descriptor, a pointer to any associated mbuf, and a pointer to the
associated bus_dmamap_t in the bus_dma case. The mbuf pointers replace
the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
defaults to 0, but can be changed to KTR_DEV at the top of the file
when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
Also, remove an incorrect XXX comment I added earlier, the driver was
correct (at least it does the same thing dc(4) does). TULIP_SP_MAC
was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
so it becomes easier to read at the expense of a couple of duplicated
lines of code. Also, use m_getcl() to get an mbuf cluster rather than
MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
fixup attach to do a better job of cleaning up when it fails. This
gets us a good bit closer to possibly having a detach method someday
and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.
I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on. I'll be removing the non-bus-dma code in a subsequent
commit.
the code, i.e. ng_fec_init() is called with the ifp->if_softc pointer and
NOT with the ifp pointer.
PR: kern/85239
Reviewed by: brooks
MFC after: 1 day
through locking; leave some spl references around code where there
are open questions about global variable references. Also, add
an XXX regarding locking in sysctl.
MFC after: 3 days
ARP requests only on the network where this IP address belong, to.
Before this change we did replied on all interfaces. This could
lead to an IP address conflict with host we are doing ARP proxy
for.
PR: kern/75634
Reviewed by: andre
cooling thread which refers psv, tc1, tc2 and tsp. The previous
code made the period where sc->tz_zone.tsp was zero, and it caused
panic at msleep().
Reported by: keramida
Tested by: keramida
it fixes. I believe the problem lives somewhere outside ng_ksocket,
but until it is found, let the node be working.
PR: kern/84952
PR: kern/82413
MFC after: 3 days
if an indirect relationship exists (keep both A->B->C and A->C).
This allows witness_checkorder() to use isitmychild() instead of
the much more expensive isitmydescendant() to check for valid lock
ordering.
Don't do an expensive tree walk to update the w_level values when
the tree is updated. Only update the w_level values when using the
debugger to display the tree.
Nuke the experimental "witness_watch > 1" mode that only compared
w_level for the two locks. This information is no longer maintained
at run time, and the use of isitmychild() in witness_checkorder
should bring performance close enough to the acceptable level that
this hack is not needed.
Report witness data structure allocation statistics under the
debug.witness sysctl.
Reviewed by: jhb
MFC after: 30 days
and detach() since mtx_lock() will assert that already since the driver
lock is not recursive.
- Move the call to callout_init_mtx() before hme_stop() so that the
callout_stop() in hme_stop() doesn't operate on an uninitialized callout
structure during attach.
Reported by: yongari (2)
MFC after: 3 days
between sack and a bug in the "bad retransmit recovery" logic. This is
a workaround, the underlying bug will be fixed later.
Submitted by: Mohan Srinivasan, Noritoshi Demizu
so that devd can match on it. This field was already available to
usbd and is used by a number of usbd.conf entries, so now it is
possible to transfer those entries to devd.conf.
Submitted by: Anish Mistry
actually 1514, so comparing the mbuf length which includes the Ethernet header
to the interface MTU is wrong.
The check was a little over the top so just remove it.
Approved by: mlaier (mentor)
MFC after: 3 days
vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode
lock aggravates an existing race condition. It is also undesirable
according to the commit log for 1.631.
Fix the tiny race condition that remains by rechecking the vnode
state after grabbing the vnode lock and grabbing the vnode interlock.
Fix the problem of other threads being starved (which 1.636 attempted
to fix by removing LK_NOWAIT) by calling uio_yield() periodically
in vlrureclaim(). This should be more deterministic than hoping
that VOP_LOCK() without LK_NOWAIT will block, which may not happen
in this loop.
Reviewed by: kan
MFC after: 5 days
enhance the security of bpf(4) by further relinquishing the privilege of
the bpf(4) consumer (assuming the ioctl commands are being implemented).
Once BIOCLOCK is executed, the device becomes locked which prevents the
execution of ioctl(2) commands which can change the underly parameters of the
bpf(4) device. An example might be the setting of bpf(4) filter programs or
attaching to different network interfaces.
BIOCSETWF can be used to set write filters for outgoing packets. Currently if
a bpf(4) consumer is compromised, the bpf(4) descriptor can essentially be used
as a raw socket, regardless of consumer's UID. Write filters give users the
ability to constrain which packets can be sent through the bpf(4) descriptor.
These features are currently implemented by a couple programs which came from
OpenBSD, such as the new dhclient and pflogd.
-Modify bpf_setf(9) to accept a "cmd" parameter. This will be used to specify
whether a read or write filter is to be set.
-Add a bpf(4) filter program as a parameter to bpf_movein(9) as we will run the
filter program on the mbuf data once we move the packet in from user-space.
-Rather than execute two uiomove operations, (one for the link header and the
other for the packet data), execute one and manually copy the linker header
into the sockaddr structure via bcopy.
-Restructure bpf_setf to compensate for write filters, as well as read.
-Adjust bpf(4) stats structures to include a bd_locked member.
It should be noted that the FreeBSD and OpenBSD implementations differ a bit in
the sense that we unconditionally enforce the lock, where OpenBSD enforces it
only if the calling credential is not root.
Idea from: OpenBSD
Reviewed by: mlaier
specifies a PMC capability (e.g., sampling) that is not supported
by hardware. Return EINVAL early if the PMC class passed in is
not recognized.
MFC after: 3 days
TTL a packet must have when received on a socket. All packets with a
lower TTL are silently dropped. Works on already connected/connecting
and listening sockets for RAW/UDP/TCP.
This option is only really useful when set to 255 preventing packets
from outside the directly connected networks reaching local listeners
on sockets.
Allows userland implementation of 'The Generalized TTL Security Mechanism
(GTSM)' according to RFC3682. Examples of such use include the Cisco IOS
BGP implementation command "neighbor ttl-security".
MFC after: 2 weeks
Sponsored by: TCP/IP Optimization Fundraise 2005
cluster if needed.
Fixes the TCP issues raised in I-D draft-gont-icmp-payload-00.txt.
This aids in-the-wild debugging a lot and allows the receiver to do
more elaborate checks on the validity of the response.
MFC after: 2 weeks
Sponsored by: TCP/IP Optimization Fundraise 2005
than ~PDRMASK to extract the physical address of a superpage from a PDE.
The use of ~PDRMASK is problematic if the PDE has PG_NX set. Specifically,
the PG_NX bit will be included in the physical address if ~PDRMASK is used.
Reviewed by: peter
depends, like all other pccard drivers, indirectly through kobj on
pccard. Therefore, it is not appropriate to force pccard to be loaded
when if_ral.ko is loaded. This makes it possible to load if_ral w/o
loading pccard.ko on, eg, pci only systems.
