Commit Graph

56118 Commits

Author SHA1 Message Date
Julian Elischer
0633aaefef Swap egress hooks for packets entering from the monitor hooks. 2001-01-26 11:35:36 +00:00
Luigi Rizzo
6258acf88f Bring dummynet in line with the code that now works in -STABLE.
It compiles, but I cannot test functionality yet.
2001-01-26 06:49:34 +00:00
Luigi Rizzo
c353c285ee Bring bridging code in line with the one which works on -STABLE.
It compiles on -CURRENT, but I can not test functionality yet.
2001-01-26 06:47:19 +00:00
Jake Burkholder
28df158b49 Push Giant down into the trap handlers that need it, instead of
acquiring it unconditionally.

Reviewed by:	jhb
2001-01-26 04:16:16 +00:00
John Baldwin
21bd1ed3bf - Don't pass in MTX_NORECURSE, as that is only used with spin mutexes and
is going away soon anyways.  Instead, don't pass MTX_RECURSE to mtx_init,
  so that WITNESS will panic if the driver mutex is recursed on.
- Use MTX_DEF in mtx_init() instead of assuming that it will be 0.
2001-01-26 03:18:17 +00:00
Daniel Eischen
f3e8cfe5ef Comment only change; s/_thread_sys_/__sys_/ 2001-01-26 02:41:07 +00:00
Daniel Eischen
c701da2b6e Comment change only; s/_thread_sys_/__sys_/ 2001-01-26 02:27:06 +00:00
Brian Somers
501fe45f67 Fix arg count 2001-01-26 01:48:16 +00:00
Brian Somers
15c8dc2a03 If executing the stuff from ppp.linkdown results in a state change,
don't continue adjusting the ipcp state machine.

This allows ``down'' to work in ppp.linkdown - useful for a tunnel
setup.
2001-01-26 01:43:38 +00:00
Brian Somers
74457d3d43 Allow ``set server closed'' to close the diagnostic socket.
Allow ``set server open'' to re-open the diagnostic socket.
Handle SIGUSR1 by re-opening the diagnostic socket
When receiving SIGUSR2 (and in ``set server none''), don't forget the
socket details so that ``set server open'' and SIGUSR1 open it again.

Don't create the diagnostic socket as uid 0 !  It's far to dangerous.
2001-01-26 01:41:34 +00:00
Coleman Kane
283028861e D'oh! Forgot to link to /dev/voodoo. 2001-01-26 01:13:29 +00:00
Luigi Rizzo
02a282ac01 Comment the interface to ether_input() and the way is normally
used by most ethernet drivers.
2001-01-25 23:56:13 +00:00
Brian S. Dean
f59091e7cd Print out the target device when the mount fails. 2001-01-25 20:05:34 +00:00
Brian S. Dean
20ee96993b Always print out the target device when the mount fails, not just on
ENOENT.
2001-01-25 20:03:38 +00:00
Julian Elischer
34f9ca0908 Only clear the 'free' bit if we were successful in getting a queue item off the free list.
Found by: Harti Brandt (address unknown)
2001-01-25 19:48:57 +00:00
John Baldwin
b00df9c9ba Whitespace fix: convert code indented 6 spaces to use tabs instead. 2001-01-25 19:37:26 +00:00
John Polstra
747291735d Make the "-pthread" option work again, now that libc_r has to be
linked in addition to libc rather than instead of libc.

Ideally, "-pthread" would now be equivalent to adding "-lc_r" to the
end of the link command.  But it is slightly different in this
implementation.  Adding "-lc_r" to the link command would produce a
"ld" command line containing this:

    ... -lc_r /usr/lib/libgcc.a -lc /usr/lib/libgcc.a ...

but this implementation of the "-pthread" option produces this:

    ... /usr/lib/libgcc.a -lc_r -lc /usr/lib/libgcc.a ...

It would be possible to make them identical, but that doesn't fit
as nicely into GCC's way of doing things.  I don't think the ordering
change will make any difference in practice.
2001-01-25 18:57:13 +00:00
Brian S. Dean
a04ea1b860 Provide a better error message when the /dev entry is non-existant.
Due to the old message, I spent way more time debugging a diskless
root problem than it should have taken.
2001-01-25 17:29:07 +00:00
David Malone
13d0228de1 Correct spelling of foresight.
PR:		24637
Submitted by:	Christopher Rued <christor@ug.cs.sunysb.edu>
2001-01-25 17:17:11 +00:00
Maxim Sobolev
ac6468bd08 Don't hardcode geometry of VESA_800x600 raster text mode (80x25). Instead save
actual geometry before switching to the graphics mode.
2001-01-25 16:58:46 +00:00
Maxim Sobolev
acdb2839d6 New option `-g' to allow selecting custom text geometry in VESA_800x600 raster
text mode. For example `vidcontrol -g 100x37 VESA_800x600' will setup 100x37
text mode as opposed to default 80x25.

Reviewed by:	imp
2001-01-25 16:53:22 +00:00
Ruslan Ermilov
a0e3937ccb mdoc(7) police: fixed a few bogons. 2001-01-25 14:16:42 +00:00
Jun Kuriyama
683bdefcd3 Return exit value 0 on success when PID is specified. 2001-01-25 13:25:41 +00:00
Hajimu UMEMOTO
aa5faffa26 - Don't try to send RA to lo0, gifN and faithN.
- ipv6_network_interfaces has all available interfaces to work for
  static configuration even if the host is end host.  When rtsol is
  invoked, singleness of interface is checked.
2001-01-25 13:18:26 +00:00
Alexey Zelkin
8b32114bd4 Fix typo 2001-01-25 13:13:55 +00:00
Nicolas Souchu
a138e28335 Discard extra status information if -1. This has been breaking the
PS/2 mode for ZIP+ drives for a long time. Thanks Jonathon.

Submitted by:	j mckitrick <jcm@FreeBSD-uk.eu.org>
2001-01-25 13:07:55 +00:00
Hajimu UMEMOTO
360351268a Mention about rtadvd_interfaces. It should be specified if you want
use rtadvd.
2001-01-25 13:05:50 +00:00
Alexey Zelkin
52cb1335f2 man(7) -> mdoc(7) 2001-01-25 12:36:16 +00:00
Alexey Zelkin
b195b11b69 Give morse(6) own manual page since common manpage for bcd(6), ppt(6) and
morse(6) was mostly dedicated to morse(6)
2001-01-25 12:35:49 +00:00
Alexey Zelkin
64385c3bca Remove never used home-born implementation of curses library from source
tree.
2001-01-25 12:24:29 +00:00
Alexey Zelkin
e85c02aad1 Slightly re-word sentence to allow using .Nm macro without parameter 2001-01-25 12:11:23 +00:00
Alexey Zelkin
020a8e3a9b Slightly re-word sentence to allow using .Nm macro without parameter
Use .St macro instead of hardcoding standard name
2001-01-25 12:10:57 +00:00
Nicolas Souchu
e28bc5f477 Set properly the PixelBytes field for 8bits modes.
Submitted by:	Maxim Sobolev <sobomax@FreeBSD.org>
2001-01-25 11:01:20 +00:00
Nicolas Souchu
c264e80fb7 Consider that the chipset may be in ECP mode (from BIOS settings)
even if mode PS/2 is forced with bootflags. As a matter of fact,
chipsets needs some extra configuration for accessing PS/2 mode
from ECP. The current patch is only relevant for generic chipsets
since specific code is supposed to deal with this during detection.
2001-01-25 10:51:41 +00:00
Ben Smithurst
f9a2828541 remove reference to nonexistent ugen(4) manual page.
PR:		24622
Submitted by:	Ernst de Haan <ernst@jollem.com>
2001-01-25 10:44:06 +00:00
Yoshihiro Takahashi
ba4c5e6950 Added necessary include for pc98. 2001-01-25 09:56:04 +00:00
Jason Evans
e25cb0a62a Remove CV_DECLARE(), which serves no useful purpose. 2001-01-25 07:29:54 +00:00
Coleman Kane
7670e0125f Add some description and clarification as to the use of the tdfx device.
Answers many questions I have recieved and has a short description of what
the driver actually does.
2001-01-25 06:58:53 +00:00
Bill Fumerola
1ed0e5d2e1 Add -c/C which chroots by IP of tftp client, (i.e. /tftproot/127.0.0.1/). 2001-01-25 04:20:25 +00:00
Will Andrews
34bc43d532 Fix bogus checking of snprintf() by decreasing the remaining size of the
string after each successful snprintf() call.  This makes apply(1) work
*correctly*, although the whole snprintf() deal really should be redone.

Bug noted by:	nectar (about 3 weeks ago)
2001-01-25 03:40:17 +00:00
Luigi Rizzo
7a726a2dd1 Pass up errors returned by dummynet. The same should be done with
divert.
2001-01-25 02:06:38 +00:00
Peter Wemm
d42df83312 Disable cy - it is now completely broken and needs non-trivial work. 2001-01-25 01:56:27 +00:00
John Baldwin
45ece682fd - Doh, lock faultin() with proc lock in scheduler().
- Lock p_swtime with sched_lock in scheduler() as well.
2001-01-25 01:38:09 +00:00
John Baldwin
7b1bec368f Back out over-aggressive locking of p->p_cred.
Requested by:	alfred
2001-01-25 01:09:44 +00:00
John Polstra
1718c8b735 Note that rmdir(2) does not follow symbolic links. 2001-01-24 23:49:59 +00:00
John Baldwin
29d3cf45a7 Remove prototype for child_return(). 2001-01-24 22:00:13 +00:00
John Baldwin
2a36ec35ae - Change fork_exit() to take a pointer to a trapframe as its 3rd argument
instead of a trapframe directly.  (Requested by bde.)
- Convert the alpha switch_trampoline to call fork_exit() and use the MI
  fork_return() instead of child_return().
- Axe child_return().
2001-01-24 21:59:25 +00:00
Julian Elischer
c73b94a276 Don't crash the kernel if the user tries to load a netgraph
module with the wrong version number.
2001-01-24 21:29:57 +00:00
Poul-Henning Kamp
b8627aab72 DEVFS cloning for if_tap.
Submitted by:	Maksim Yevmenkin <m_evmenkin@yahoo.com>
2001-01-24 20:59:34 +00:00
John Baldwin
77e9b2790e - Remove some unused and unneeded atomic operations sitting in mp_machdep.c
that are already implemented in atomic.h.
- Fix SMP kernel builds.
2001-01-24 19:49:13 +00:00