or comments, and some is as a result of simply documenting the
entropy harvester.
This still needs work: could a newbus guru pleazse follow up
and fix.extend my (no doubt) obvious mistakes!
resource_query_unit and improve the descriptions of the parameters
passed to these functions.
Plus a couple minor formatting/markup changes:
o Quote -1 as \-1.
o .Dq hints to match resource_int_value().
and Pentium II, III and IV processors (p2, p3, p4), as well as 'mmx' and
'3dnow' MACHINE_CPU tags as appropriate. In the near future this will
be used to control various ports which have MMX/3dNow optimizations,
instead of the ad-hoc methods currently used.
Reviewed by: peter
libssl, for example), and hide it behind a make.conf option,
WANT_OPENSSL_MANPAGES, instead of having it commented out. We still can't
install these by default because of clobbering of a number of system
manpages with the same name, but they're there for people who want them.
and add a sysctl to pppoe to activate non standard ethertypes
so that idiot ISPs (apparently in France) who use
equipment from idiot suppliers (rumour says 3com)
who use nonstandard ethertypes can still connect.
"yep, sure we do pppoe, we use a different identifier to that dictated in
the standard, but sure it's pppoe!"
sysctl -w net.graph.stupid_isp=1 enables the changeover.
packet flow into two unidirectional flows.
Part of a suite of nodes developed for packet flow control.
More to follow as I have time to port them to 5.x or
as others do so. The ipfw node will be the hardest..
Submitted by: "Vitaly V. Belekhov" <vitaly@riss-telecom.ru>
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
users should be configuring via m4 now. If set, use m4 to create the .cf
file. Also, if either SENDMAIL_MC or SENDMAIL_CF is set, 'make install' or
'make distribution' in src/etc/sendmail/ will install the appropriate .cf as
/etc/mail/sendmail.cf. This fixes some mergemaster problems.
PR: conf/13016
if (error = function(a1, a2))
since it causes a warning with -Wall. Change it so it has an explicit test
against zero,
if ((error = function(a1, a2)) != 0)
set the variable until you rebuild it, and the alternative is to be stuck
playing games with ``.if defined(MACHINE_CPU) && ... '' for all eternity.
We now set up the reasonable default for i386 and alpha here -- given this
it probably makes sense to remove the corresponding code from make(1).
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
"FreeBSD.pfa" - the (postscript) font used to write "FreeBSD".
"beastie.fig" - a 4.3 BSD style Daemon in vector graphic.
"beastie.eps" - same converted to encapsulated postscript.
"poster.sh" - an example how to use this stuff.
"README" - the full story.
caught up with the changes to avoid storing socket addresses in mbufs,
although the VFS_CHECKEXP() code had to since it was committed 2 years
after those changes.
Fixed formatting in this prototype.
using bus_alloc_resource(), etc., are especially unobvious, but were
especially wrong (<sys/resource.h> has nothing to do with the resources
documented here...). Order and format the includes as correctly as
possible (a layering violation makes <machine/bus.h> a prerequisite for
<sys/rman.h>).
Added evil #define of ACCEPT_FILTER_MODULE to synopsis. Some of
the functions defined in this man page aren't declared unless
ACCEPT_FILTER_MOD is defined before including <sys/socketvar.h>.
user confusion, so specify it directly, i.e. change "3" to "3;0".
In this style "3;" or "3" must not cause repeating
(converted to \3, CHAR_MAX, \0)
Still not implemented and broken in localeconv()
user confusion, so specify it directly, i.e. change "3" to "3;0".
In this style "3;" must not cause repeating (converted to \3, CHAR_MAX, \0)
NOTE: still no proper conversion done in localeconv()
repeated forever according to SUSv2
Remove "0;0" - \0 means not "no grouping" but repeat forever previous char,
and added automatically. Empty string could be parsed later into CHAR_MAX
(real "no grouping") by localeconv()
en_CA, en_GB => en_US
en_AU, en_NZ => en_GB
fr_CA, fr_CH => fr_FR
There are separate links for `GB English' and `US English' because I
anticipate users of the former to potentially want a thousands_sep of
" " (to match modern British style) rather than ",".
XXX What about en_IE? ISO_8859-15?
LC_MONETARY (share/monetdef), LC_MESSAGES (share/msgdef). Now only
en_US.ISO_8859-1 and ru_RU.KOI8-R locales ready. I will find some time
in near future and'll try to make defintions for other locales.
to be the same as -ragged in the current implementation) to
-ragged. With mdocNG, -filled displays produce the correct
output, formatted and justified to both margins.
(e.g. ethernet nodes are persistent until you rip out the hardware)
Use this support in the ethernet and sample nodes.
Add some more abstraction on the 'item's so that node and
hook reference counting can be checked easier.
Slight man page correction.
Make pppoe type dependent on ethernet type.
Clean up node shutdown a little.
Move a mutex from MTX_SPIN to MTX_DEF (oops)
Fix small ref-counting bug.
remove warning on one2many type.
The new method is 'flood' (in addition to the old round-robin)
in which incoming packets are sent to more than one outgoing hook.
(I'm not sure what Rogier is using this for but it seems generally useful
and isn't much extra)
Submitted by: Rogier R. Mulhuijzen (drwilco@drwilco.net )
initialization until after malloc() is safe to call, then iterate through
all mutexes and complete their initialization.
This change is necessary in order to avoid some circular bootstrapping
dependencies.
punctuation, and explanations that are just plain wrong)
o Add missing entries
o Remove entries for directories that do not exist
Submitted by: Rich Morin <rdm@cfcl.com> (for the most part)
This version is functional and is aproaching solid..
notice I said APROACHING. There are many node types I cannot test
I have tested: echo hole ppp socket vjc iface tee bpf async tty
The rest compile and "Look" right. More changes to follow.
DEBUGGING is enabled in this code to help if people have problems.
current format. The new database also has subvendor/subdevice ID
information, which we aren't using for now. This adds 272 new vendors
and 376 new device identifiers, as well as cleaning out some of the
bad entries in the previous revision.
We now combine data from:
http://www.yourvote.com/pcihttp://members.hyperlink.com.au/~chart/pci.htm
<bde>
o Add comments in some places to clarify some points.
o Don't typedef sc_p. This isn't usually done in the drivers and may
cause problems in teh future if C goes the C++ route of requiring
one and only one definition for each and every type. Instead use
the current convetion of expanding struct ${1}_softc * inline needed.
o change some comments to be more style(9)-like.
o Define and use DEV2SOFTC to encapsulate storing/getting softc from a
dev_t. This also takes care of the missing cast from the examples.
o Define and use DEVICE2SOFTC, similar to DEV2SOFTC for getting the
softc from a device_t.
</bde>
We still should have this generate foo_{isa,pci,pccard,cardbus,eisa}.c
and foovar.h from templates of some sort, but I was too lazy to do
that in this commit. I did document it in the comments, however.
Note: bde-like corrections made with the help of my my portable
plastic bde icon. Results with the real bde may vary with use.
format version number. (userland programs should not need to be
recompiled when the netgraph kernel internal ABI is changed.
Also fix modules that don;t handle the fact that a caller may not supply
a return message pointer. (benign at the moment because the calling code
checks, but that will change)
This clears out my outstanding netgraph changes.
There is a netgraph change of design in the offing and this is to some
extent a superset of soem of the new functionality and some of the old
functionality that may be removed.
This code works as before, but allows some new features that I want to
work with and evaluate. It is the basis for a version of netgraph
with integral locking for SMP use.
This is running on my test machine with no new problems :-)
.PATH to ${.CURDIR}/[...]/kern , the "exists" expression will fail for the
form exists(${.CURDIR}/[...]/kern/). This appears to be happening because
make is searching for the argument to "exists" by using .PATH rather than a
relative search, because .PATH and the argument match at the beginning.
Additionally, make appears to consider a path that starts with ${.CURDIR}
as relative, even though it expands to an absolute path.
The reason that most people aren't seeing this problem is that the absolute
paths of /usr/src/sys and /sys are also searched, so as long as the kernel
source can be found in at least one of those places, no problems surface.
This problem was inadvertently introduced on 1 December 2000, with the
addition of the sysvipc modules.
by other tools as well).
Note that omissions and corrections for this file should be resolved
via http://www.yourvote.com/pci, as this is the master source for this
database, rather than by editing this file directly.
