The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
in some cases (strace -f man id > /dev/null).
Reviewed by: dchagin
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20691
This patch is the driver for NTB hardware in AMD SoCs (ported from Linux)
and enables the NTB infrastructure like Doorbells, Scratchpads and Memory
window in AMD SoC. This driver has been validated using ntb_transport and
if_ntb driver already available in FreeBSD.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18774
simple change to the control flow. Replace an unnecessary test by a
KASSERT. Add a comment explaining an obscure test.
Reviewed by: kib, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20812
The goal of this driver is consolidate information about SuperIO chips
and to provide for peaceful coexistence of drivers that need to access
SuperIO configuration registers.
While SuperIO chips can host various functions most of them are
discoverable and accessible without any knowledge of the SuperIO.
Examples are: keyboard and mouse controllers, UARTs, floppy disk
controllers. SuperIO-s also provide non-standard functions such as
GPIO, watchdog timers and hardware monitoring. Such functions do
require drivers with a knowledge of a specific SuperIO.
At this time the driver supports a number of ITE and Nuvoton (fka
Winbond) SuperIO chips.
There is a single driver for all devices. So, I have not done the usual
split between the hardware driver and the bus functionality. Although,
superio does act as a bus for devices that represent known non-standard
functions of a SuperIO chip. The bus provides enumeration of child
devices based on the hardcoded knowledge of such functions. The
knowledge as extracted from datasheets and other drivers.
As there is a single driver, I have not defined a kobj interface for it.
So, its interface is currently made of simple functions.
I think that we can the flexibility (and complications) when we actually
need it.
I am planning to convert nctgpio and wbwd to superio bus very soon.
Also, I am working on itwd driver (watchdog in ITE SuperIO-s).
Additionally, there is ithwm driver based on the reverted sensors
import, but I am not sure how to integrate it given that we still lack
any sensors interface.
Discussed with: imp, jhb
MFC after: 7 weeks
Differential Revision: https://reviews.freebsd.org/D8175
when, in fact, we are write protecting the page and the PTE has PG_M set.
However, pmap_protect_pde() was always calling vm_page_dirty() when the PDE
has PG_M set. So, adding PG_NX to a writeable PDE could result in
unnecessary (but harmless) calls to vm_page_dirty().
Simplify the loop calling vm_page_dirty() in pmap_protect_pde().
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20793
This adds emulation for:
test r/m16, imm16
test r/m32, imm32
test r/m64, imm32 sign-extended to 64
OpenBSD guests compiled with clang 8.0.0 use TEST directly against a
Local APIC register instead of separate read via MOV followed by a
TEST against the register.
PR: 238794
Submitted by: jhb
Reported by: Jason Tubnor jason@tubnor.net
Tested by: Jason Tubnor jason@tubnor.net
Reviewed by: markj, Patrick Mooney patrick.mooney@joyent.com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20755
Use it to indicate whether the page may be safely freed following
its removal from the object. Also change vm_page_remove() to assume
that the page's object pointer is non-NULL, and have callers perform
this check instead.
This is a step towards an implementation of an atomic reference counter
for each physical page structure.
Reviewed by: alc, dougm, kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20758
When pmap_pkru_on_remove() is called, the sva argument value was
advanced. Clear PKRU earlier when sva still specifies the start of
the region.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Port the code to block on turnstile instead of yielding, to lock-less
delayed invalidation. The yield might cause tight loop due to priority
inversion.
Since it is impossible to avoid race between block and wake-up, arm
1-tick callout to wakeup when thread blocks itself.
Reported and tested by: mjg
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Differential revision: https://reviews.freebsd.org/D20636
translation units with differing capabilities
From the author via Bugzilla:
---
When an attempt is made to passthrough a PCI device to a bhyve VM
(causing initialisation of IOMMU) on certain Intel chipsets using
VT-d the PCI bus stops working entirely. This issue occurs on the
E3-1275 v5 processor on C236 chipset and has also been encountered
by others on the forums with different hardware in the Skylake
series.
The chipset has two VT-d translation units. The issue is caused by
an attempt to use the VT-d device-IOTLB capability that is
supported by only the first unit for devices attached to the
second unit which lacks that capability. Only the capabilities of
the first unit are checked and are assumed to be the same for all
units.
Attached is a patch to rectify this issue by determining which
unit is responsible for the device being added to a domain and
then checking that unit's device-IOTLB capability. In addition to
this a few fixes have been made to other instances where the first
unit's capabilities are assumed for all units for domains they
share. In these cases a mutual set of capabilities is determined.
The patch should hopefully fix any bugs for current/future
hardware with multiple translation units supporting different
capabilities.
A description is on the forums at
https://forums.freebsd.org/threads/pci-passthrough-bhyve-usb-xhci.65235
The thread includes observations by other users of the bug
occurring, and description as well as confirmation of the fix.
I'd also like to thank Ordoban for their help.
---
Personally tested on a Skylake laptop, Skylake Xeon server, and
a Xeon-D-1541, passing through XHCI and NVMe functions. Passthru
is hit-or-miss to the point of being unusable without this
patch.
PR: 229852
Submitted by: callum@aitchison.org
MFC after: 1 week
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
Convert the array to use C99 initializers.
Make it constant.
Replace MAX_TRAP_MSG with nitems().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
When disabling the last enabled userspace probe, fasttrap clears the
function pointers which hook in to the breakpoint handler. If a traced
thread hit a fasttrap breakpoint before it was removed, we must ensure
that it is able to call the hook; otherwise fasttrap will not consume
the trap and SIGTRAP will be delievered to the thread. Synchronize
with such threads by ensuring that they load the hook pointer with
interrupts disabled, and by completing an SMP rendezvous after removing
breakpoints and before clearing the pointers.
Reported by: Alexander Alexeev <Alexander.Alexeev@dell.com>
Tested by: Alexander Alexeev (earlier version)
Reviewed by: cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20526
pci_alloc_msix() requires both the table and PBA BARs to be allocated
by the driver. ppt was only allocating the table BAR so would fail
for devices with the PBA in a separate BAR. Fix this by allocating
the PBA BAR before pci_alloc_msix() if it is stored in a separate BAR.
While here, release BARs after calling pci_release_msi() instead of
before. Also, don't call bus_teardown_intr() in error handling code
if bus_setup_intr() has just failed.
Reported by: gallatin
Tested by: gallatin
Reviewed by: rgrimes, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20525
in the loss of a KASSERT that guarded against the invalidation a wired
mapping. Restore this KASSERT.
Remove an unnecessary KASSERT from pmap_demote_pde_locked(). It guards
against a state that was already handled at the start of the function.
Reviewed by: kib
X-MFC with: r348476
If service code faulted, we might end up unwinding with interrupts
disabled. Top-level kernel code should have interrupts enabled, which
is enforced by checks.
Save %rflags before entering EFI, and restore to the known good value
on return. This handles situation with disabled interrupts on fault
and perhaps other potential bugs, e.g. invalid value for PSL_D.
Reported and tested by: Jan Martin Mikkelsen <janm@transactionware.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
debugging checks.
In particular,
- Move the code to handle failure to allocate page table page into
a helper.
- After the previous item is done, it is possible to distinguish !PG_A
case and case of missed page, in the control flow.
- Make the variable to indicate that in-kernel mapping is demoted.
- Assert that missed page table page can only happen for in-kernel
mapping when demoting direct map.
- If DIAGNOSTIC is enabled, and the page table page should be already
filled, check all ptes instead of only first one.
Reviewed by: alc, markj
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20266
syscalls.conf is included using "." which per the Open Group:
If file does not contain a <slash>, the shell shall use the search
path specified by PATH to find the directory containing file.
POSIX shells don't fall back to the current working directory.
Submitted by: Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20476
tables which affect demotion.
The last last-level page table under 2M mappings below KERNend was
only partially initialized. When that page was used as the hardware
page table for demotion of the 2M mapping, the result was not
consistent. Since pmap_demote_pde() is switched to use PG_PROMOTED as
the test for the validity of the saved last level page table page, we
can keep page table pages zero-initialized instead. Demotion would
fill them as needed.
Only map the created page tables beyond KERNend, there is no need to
pre-promote PTmap after KERNend, because the extra mapping is not used.
Only round up *firstaddr to 2M boundary when it is below rounded
KERNend. Sometimes the allocpages() calls advance *firstaddr past the
end of the last 2MB page mapping. In that case, this conditional
avoids wasting an average of 1MB of physical memory.
Update comments to explain action in more clean and direct language.
Reported and tested by: pho
In collaboration with: alc
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20380
The upper bound for the valid address from the large map used
LARGEMAP_MAX_ADDRESS instead of LARGEMAP_MIN_ADDRESS. Provide a
function-like macro for proper upper value.
Noted by: markj
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20386
Similar to PG_FRAME and PG_PS_FRAME, it denotes the mask of the
physical address component of 1G superpage PDP entry.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20386
It is possible for the kernel mapping to be created with superpage by
directly installing pde using pmap_enter_2mpage() without filling the
corresponding page table page. This can happen e.g. if the range is
already backed by reservation and vm_fault_soft_fast() conditions are
satisfied, which was observed on the pipe_map.
In this case, demotion must fill the page obtained from the pmap
radix, same as if the page is newly allocated. Use PG_PROMOTED bit as
an indicator that the page is valid, instead of the wire count of the
page table page.
Since the PG_PROMOTED bit is set on pde when we leave TLB entries for
4k pages around, which in particular means that the ptes were filled,
it provides more correct indicator. Note that pmap_protect_pde()
clears PG_PROMOTED, which handles the case when protection was changed
on the superpage without adjusting ptes.
Reported by: pho
In collaboration with: alc
Tested by: alc, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20380
If MDS mitigation is enabled by the tunable but MDS microcode is not
early-loaded, software mitigation is selected. This causes
initializecpu() to try to allocate memory which makes boot process
very unhappy.
Create SYSINIT that runs sufficiently late to succeed.
Reported by: naddy
PR: 237968
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
Submitted by: Patrick Mooney <pmooney@pfmooney.com>
Reviewed by: kib
Tested by: Patrick on SmartOS with Linux and Windows guests
Obtained from: Joyent
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20296
Apparently, there is more code trying to call pmap_remove() early,
mostly to free preloaded memory. Instead of moving all deallocations
to the point where a scheduler is initialized, add missed setup of
thread0 di init at hammer_time().
The code in pmap_delayed_invl_start_u() is modified to not ever take
the thread lock if the thread priority is less or equal to PVM. Since
thread0 starts at priority 0, and then is reset to PVM at
proc0_init(), this eliminates taking the thread lock during early
boot.
While there, fix off by one in comparision of the base priority.
Reported and tested by: bcran (previous version)
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 29 days
In all practical situations, the resolver visibility is static.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: so (emaste)
Differential revision: https://reviews.freebsd.org/D20281
This is done mostly for debugging in field. Also added the sysctl of
the same name to report used mode.
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
