* Record TX mbufs when we get them so we can release them.
* Set TX/RX mbuf slots to NULL when we are no longer responsible for them
* Move dma sync on RX into RX intr routine
processors, either on reboot or after power down with battery backup.
However, the AT91RM9200 RTC always resets on reboot making it just
about useless at the moment (if we support a low-power mode or an
extended sleep mode, it might become useful).
Submitted by: Ian Lepore
this some compilers will place a cmp instruction before the atomic operation
and expect to be able to use the result afterwards. By adding "cc" to the
list of used registers we tell the compiler to not do this.
problematic because some callers to pmap_kextract() expect its
implementation to be lock-less. In particular, uma_dbg_alloc() implicitly
requires this. Otherwise, lock-order reversals occur between pmap locks and
UMA zone locks. So, this change introduces a lock-less implementation of
pmap_kextract().
Disable recursion on the pvh global lock in the new armv6 pmap. While
recursion on this locks occurs in the old arm pmap, it thankfully doesn't
occur in the armv6 pmap.
Tested by: jmg
there is no need to release and reacquire the pmap and pvh global locks
around calls to uma_zfree(). Recursion into the pmap simply won't occur.
Eliminate the use of M_USE_RESERVE. It is deprecated and, in fact, counter-
productive, meaning that it actually makes the memory allocation request
more likely to fail.
Eliminate the macros pmap_{alloc,free}_l2_dtable(). They are of limited
utility, and pmap_free_l2_dtable() was inconsistently used.
Tidy up pmap_init(). In particular, change the initialization of the PV
zone so that it doesn't span the initialization of the l2 and l2table zones.
Tested by: jmg
On single core devices set_stackptrs is only ever called with cpu = 0 in
initarm and will be identical to the existing function. On SMP this needs
to be implemented for sys/arm/mp_machdep.c, but the implementations are
identical for each SoC.
an NVidia Tegra 2 CPU.
Tegra 2 needs an external patch to pmap for atomic operations to work. Even
with this the Kernel only gets to the mount root prompt. As such Tegra
support is considered experimental, however adding the kernel config will
help ensure the Tegra code builds.
such that when commenting/uncommentting lines, horizontal spacing is
maintained...
Also fix some minor comment formatting to line things up, etc...
Reviewed by: gnn, imp
MFC after: 1 week
MSI are implemented via Inbound Shared Doorbell 1 interrupts. Interrupts
are triggered by writing to Software Triggered Interrupt registeri (PCIe
card using physical address of this register in BAR0 space). There are 32
interrupts available. It can be increased by using Doorbell 2 and
Doorbell 3 registers to 96 interrupts.
Obtained from: Marvell, Semihalf
MSI are implemented via software interrupt. PCIe cards will write
into software interrupt register which will cause inbound shared
interrupt which will be interpreted as a MSI.
Obtained from: Marvell, Semihalf
- Add functions to calculate clocks instead using hardcoded values
- Update reset and timers functions
- Update number of interrupts
- Change name of platform from db88f78100 to db78460
- Correct DRAM size and PCI IRQ routing in dts file.
Obtained from: Semihalf
to this pmap.
Revise some comments.
The file vm/vm_param.h includes the file machine/vmparam.h, so there is no
need to directly include it.
Tested by: andrew
