occurs if t3_sge_alloc_qset fails and then t3_free_qset attempts to
destroy an uninitialized mutex.
Submitted by: Vijay Singh <vijju dot singh at gmail>
MFC after: 3 days
RocketRAID 4500 series.
Many thanks to HighPoint Technologies for their continued support
of FreeBSD!
Submitted by: HighPoint Technologies
MFC after: 3 days
appear on which interface. This fixes detection of some USB audio adapters.
Also increase the channel limit for FULL speed devices to 4 channels.
Tested by: gavin
MFC after: 1 week
Also update the port reset time from 250ms to 50ms. Some USB devices
have a hard limit in hardware at 222ms for the port reset time and will
not enumerate unless this delay is closer to the usb.org defined value.
This patch can fix enumeration with some USB devices.
Tested by: Guido van Rooij
Submitted by: Nick Hibma
MFC after: 1 week
link at a lower speed so enabling it for fiber adapters is wrong.
Fix the issue by setting BGE_PHY_NO_WIRESPEED such that brgphy(4)
wouldn't enable the feature.
While I'm here move PHY specific feature/bug configuration to new
location(just before mii attach) for readability.
device drivers that used to provide this feature.
This is a subset of 241856 (which was reverted)
Reviewed by: des
Approved by: cperciva (implicit)
MFC after: 1 week
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
parent adapter's _DOD list, only check the low 16 bits of both _ADR and
_DOD. The language in the ACPI spec seems to indicate that the _ADR values
should exactly match the entries in _DOD. However, I assume that the
masking added to _DOD values was added to work around some known busted
machines (the commit history doesn't indicate either way), and the ACPI
spec does require that the low 16 bits are unique for all video outputs,
so only check the low 16 bits should be fine.
This fixes recognition of video outputs that use the new standardized
device ID scheme in ACPI 3.0 that set bit 31 such as certain Dell laptops.
Tested by: Juergen Lock nox jelal kn-bremen de
MFC after: 3 days
(Model 0x2D /* Per Intel document 253669-044US 08/2012. */)
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris@ fabient@
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
that revises the netmap memory allocator so that the
various parameters (number and size of buffers, rings, descriptors)
can be modified at runtime through sysctl variables.
The changes become effective when no netmap clients are active.
The API is mostly unchanged, although the NIOCUNREGIF ioctl now
does not bring the interface back to normal mode: and you
need to close the file descriptor for that.
This change was necessary to track who is using the mapped region,
and since it is a simplification of the API there was no
incentive in trying to preserve NIOCUNREGIF.
We will remove the ioctl from the kernel next time we need
a real API change (and version bump).
Among other things, buffer allocation when opening devices is
now much faster: it used to take O(N^2) time, now it is linear.
Submitted by: Giuseppe Lettieri
doesn't automatically clear when VDD rises above Vlow again and needs to be
cleared manually. However, apparently this needs all of the time registers
to be set, i.e. pcf8563_settime(), and not just PCF8563_R_SECOND in order
for PCF8563_R_SECOND_VL to stick. Thus, we just issue a warning during
pcf8563_attach() rather than failing with ENXIO in case it is set.
MFC after: 3 days
This eliminates the need to manage queue depth at the nvd(4) level for
Chatham prototype board workarounds, and also adds the ability to
accept a number of requests on a single qpair that is much larger
than the number of trackers allocated.
Sponsored by: Intel
nvme_ctrlr_submit_io_request().
While here, also fix case where a uio may have more than 1 iovec.
NVMe's definition of SGEs (called PRPs) only allows for the first SGE to
start on a non-page boundary. The simplest way to handle this is to
construct a temporary uio for each iovec, and submit an NVMe request
for each.
Sponsored by: Intel
from an NVMe consumer.
This allows us to mostly build NVMe command buffers without holding the
qpair lock, and also allows for future queueing of nvme_request objects
in cases where the submission queue is full and no nvme_tracker objects
are available.
Sponsored by: Intel
This simplifies the driver significantly where it is constructing
commands to be submitted to hardware. By reducing the number of
PRPs (NVMe parlance for SGE) from 128 to 32, it ensures we do not
allocate too much memory for more common smaller I/O sizes, while
still supporting up to 128KB I/O sizes.
This also paves the way for pre-allocation of nvme_tracker objects
for each queue which will simplify the I/O path even further.
Sponsored by: Intel
