and quite lightwait.
The purpose of this commit, and the previous one, is to be able to measure
overhead of pointer arguments - in case you're running a strange architecture
where pointers and integers are quite different things at the hardware level.
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
- r325082 split native-xtools-install out of native-xtools.
- r325000 incorrectly changed the installation path from /nxb-bin to /.
Discussed with: imp at D12782
To ensure that I don't break the MK_ZFS=no case (currently working),
add that to the build, at least for i386 and amd64. Also, out of an
abundance of caution, clean single threaded, and then build in a
separate make. Otherwise, I hit a race where we build before objdir
has been created, which breaks at the moment.
Sponsored by: Netflix
The new native-xtools uses 'make toolchain' so overriding DESTDIR
as a make argument may interfere with WORLDTMP handling.
The target also does a 'mkdir -p ${NXBDESTDIR}/usr', so we should
be modifying that rather than DESTDIR.
Note this causes the native-xtools binaries to be installed in
NANO_WORLDDIR/usr NANO_WORLDDIR/bin rather than NANO_WORLDDIR/nxb-bin/usr
and NANO_WORLDDIR/nxb-bin/bin. This was the case before this change
as well.
MFC after: 2 weeks
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12782
One could run this from any directory, but it's designed to do
regression testing on sys/boot (it only tests on a subset of
architectures since all of them would take a lot longer and not help).
This will also ensure that future commits to sys/boot compile
everywhere.
Sponsored by: Netflix
diff (and man page) are not from GNU, as of r317209, and should not be
deleted if WITHOUT_GNU_DIFF is set. (WITHOUT_GNU_DIFF still controls
whether diff3 is built.)
Sponsored by: The FreeBSD Foundation
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
/usr/local/etc gets created and populated by packages. However, if no
packages are installed when setup_nanobsd is run, this symlink won't
get created, causing problems if packages are installed later (say on
first boot). Therefore, always create the symlink and etc/local. It
does no harm and may help.
Inspired by crochet issue #183 (consuingly says NanoBSD, means crochet)
Sponsored by: Netflix
This function was only set in legacy.sh and only at the very end after
the disk image had been successfully created. The only difference will be
that the message 'Error encountered. Please check...' will not appear if
nanobsd.sh exits with an error after the disk image has been created.
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
This method is required for querying file / disk sizes which is needed
at least for finding all copies of ZFS VDEV labels.
Reported by: ngie
MFC after: 1 week
- Standardize on SRCTOP instead of .CURDIR-relative paths
- Use LIBADD instead of a mix of specifying -lgeom via DPADD/LDADD/LDFLAGS.
Specifying -lgeom via LDFLAGS is an especially unnecessary and odd
pattern.
MFC after: 1 week
pager_output(..) has always returned int. For some reason (probably the
clang 5.0 update), this mismatch now results in an error with CC=clang.
MFC after: 1 week
The wlanwds code was just creating a clone VAP without specifying the MAC
address to use for said clone VAP. This meant that if an interface
was cloned from an AP interface that wasn't the first created VAP
(which shares the same MAC as the parent physical interface by default)
then the cloned interface would have the wrong MAC and traffic wouldn't work.
Besides chip bugs (ha!) this isn't a requirement.
So, teach wlanwds to:
* look up the link layer address for a given interface (which really should
be a library interface, and will likely quickly become one);
* use this when creating a cloned interface for a DWDS peer;
* (net80211 already has the infrastructure to do this, it just needed to be
used);
* add some extra logging to see what MAC addresses, parent interfaces, etc
are being created.
Whilst here, add a reminder that I should extend this to include monitoring
a specific VAP for DWDS updates rather than just the parent interface.
This is the first step in allowing for multiple DWDS hops, which is a
pre-requisite for adrian's house having wifi in the single upstairs room.
Tested:
* AR9380, DWDS AP + AP mode - with DWDS AP being the second VAP created
with a different MAC address;
* AR9331 (Carambola2), AP + DWDS STA;
* passing traffic
TODO:
* fix 802.11s so this DWDS stuff is no longer required!
.cvs into the image.
This makes .gitignore files in the working tree appear in the final
tree...
PR: 192178
Submitted by: Jason Unovitch
Sponsored by: Netflix
MFC After: 3 days
The defualt NANO_PACKAGE_LIST is *, which fails to work
properly. Expand glob characters and make sure that we install the
special pkg package first.
Sponsored by: Netflix
Submitted by: wout at canodus dot be
PR: 219405
MFC After: 3 days
`MK_ZONEINFO_LEAPSECONDS_SUPPORT == yes` and
`MK_ZONEINFO_OLD_TIMEZONES_SUPPORT == yes`.
Keep `LEAPSECONDS` and `OLDTIMEZONES` for backwards compatibility,
but print out a warning notifying users that they should use the new
variables, in an effort to migrate them to the variables. This is being
done mostly for automated build tools, etc, that might rely on these
variables being set. The variables will be removed in the future on
^/head, e.g., after ^/stable/12 is cut.
MFC after: 1 month
Relnotes: yes
Reviewed by: bdrewery
Differential Revision: D11376
- Always unlink $cmd after exit via END block.
- The tests don't function well if kern.geom.debugflags != 0. Save debugflags,
then restore them at the end of the test.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
This will allow the tool to be used with arbitrary geom(4) classes, like GEOM.
Specify class=PART explicitly in the tester to keep existing behavior.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Before this test just checked scenario of setting and removing the accept
filter at different states of the socket. Now it also checks that accept
filter works: we connect to the server, and then check that we can't accept,
then we send 1 byte of data and check again.
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
- Use a new 'char *key' to allocate storage for keys and assign the
pointer to the session2_op 'const char *' members after the key is
initialized.
- Mark the 'find' variable used in crfind() static so that crfind()
doesn't return a pointer to stack garbage.
Reported by: olivier (1)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
roff documentation from the build.
Those documents will be added to the doc tree and distributed as PDF from
the documentation website. As they are valuable has history, but do not match
current FreeBSD
Further more, the ascii format we were using to distribute them is not really
accurate for such documents.
more details:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-May/018211.html
