interrupts, read from the interrupt status register to clear any pending
interrupts. Otherwise in some rare cases the RTC would never fire any
interrupts as it constantly thinks it has an interrupt pending.
PR: i386/17800
PR: kern/76776
Submitted by: Jose M. Alcaide jose at we dot lc dot ehu dot es
MFC after: 2 weeks
- Add buffer size limitations (overflow will not be possible anymore).
- Add 'visible' option, which will allow for passphrase reading in the
future.
- Remove special treatment of '@' and '#', those two are only confusing.
Discussed with: rwatson
MFC after: 2 weeks
release) the sio spin mutex, as use of synchronization primitives in
the debugger can result in substantial problems. With this patch in
place entering the debugger via a serial console is made
substantially more reliable.
MFC after: 1 week
Tested by: kris
Discussed with: bde
tond and not fromnd. This could lead us to leak Giant, or unlock it
twice, depending on the filesystems involved. renames within a single
filesystem would not have caused any problems.
Sponsored by: Isilon Systems, Inc.
AUE_NULL. This is a place-holder to allow other audit infrastructure
to be introduced, such as an updated syscalls.master file format,
while the license on the real audit_kevents.h is fixed.
The cause of "Duplicate mbuf free panic" is in the programming
error of hme_load_txmbuf(). The code path of the panic is the
following.
1. Due to unknown reason DMA engine was freezed. So TX descritors
of HME become full and the last failed attempt to transmit a
packet had set its associated mbuf address to hme_txdesc
structure. Also the failed packet is requeued into interface
queue structure in order to retrasmit it when there are more
available TX descritors.
2. Since DMA engine was freezed, if_timer starts to decrement its
counter. When if_timer expires it tries to reset HME. During
the reset phase, hme_meminit() is called and it frees all
associated mbuf with descriptors. The last failed mbuf is also
freed here.
3. After HME reset completed, HME starts to retransmit packets
by dequeing the first packet in interface queue.(Note! the
packet was already freed in hme_meminit()!)
4. When a TX completion interrupt is posted by the HME, driver
tries to free the successfylly transmitted mbuf. Since the
mbuf was freed in step2, now we get "Duplicate mbuf free panic".
However, the real cause is in DMA engine freeze. Since no fatal
errors reported via interrupts, there might be other cause of
the freeze. I tried hard to understand the cause of DMA engine
freeze but couldn't find any clues. It seems that the freeze
happens under very high network loads(e.g. 7.5-8.0 MB/s TX speed).
Though this fix is not enough to eliminate DMA engine freeze it's
better than panic.
Reported by: jhb via sparc64 ML
executed. This appears to violate most of the UNIX-ish standards.
One example quote from:
http://www.opengroup.org/onlinepubs/009695399/functions/exec.html
Upon successful completion, the exec functions shall mark for update
the st_atime field of the file. If an exec function failed but was
able to locate the process image file, whether the st_atime field is
marked for update is unspecified. Should the exec function succeed,
the process image file shall be considered to have been opened with
open().
This appears to take care of it for ufs filesystems, doing the necessary
sanity checks (read-only filesystem, etc) without violating any other
standards (setting atime for any open appears to be allowed in any standards
I could find).
Noticed by: cperciva
Reviewed by: kan, rwatson
CIS, weren't actually used anywhere (other than the generic PC Card
code when certain variables are defined). They aren't used in NetBSD
either. Make things simpler by removing them. Change PLANEX_2 to
PLANEX and tweak wi and owi to use that instead. The PLANEX id seems
to actually be pci ID assigned to planex, not its pcmcia id. Ooops.
I don't know if this is a reporting error from where this entry came
from, or if it is a mistake on PLANEX's part. I suspect the latter,
as ACTIONTEC and NEWMEDIA made the same mistake (although new media
may be because it uses an advansys chip inside). Make a note of this
in the file. The 0xc entires may be JEITA assigned, so note that as
well.
# This leaves just 3 entries that are totally unknown: airvast, archos
# and edimax although the arivast number is the same assigned to
# avertec in usb...
This driver implements "unaddressed listen only mode", which is what
printers and plotters commonly do on GP-IB busses.
This means that you can capture print/plot like output from your
instruments by configuring them as necessary (good luck!) and
cat -u /dev/gpib0l > /tmp/somefile
Since there is no way to know when no more output is comming you
will have to ctrl-C the cat process when it is done (that is why
the -u is important).
before entering ng_netflow. In this case it will have not NULL m_pkthdr.rcvif.
However, it will enter ng_iface soon with another index. So let in_ifIndex
value configured by user override m_pkthdr.rcvif.
Reported by: Damir Bikmuhametov
MFC after: 1 week
all reserved, as the lisence makes clear), and strike the third clause
(now this is a 2-clause liberal BSDL as are the rest of files I hold
copyright over).
The presence or absence of a keyboard does not change whether an
UART is designed as a keyboard port or not and thus whether we
can use the port as a TTY or not.
We now call sunkbd_attach() even when we didn't previously find
a keyboard. Emit a useful message stating that no keyboard was
found, but don't do anything else.
MFC after: 5 days
a UMA zone instead. This should eliminate a bit of the locking
overhead associated with with malloc and reduce the memory
consumption associated with each new state.
Reviewed by: rwatson, andre
Silence on: ipfw@
MFC after: 1 week
second; since the default hz has changed to 1000 times a second,
this resulted in unecessary work being performed.
MFC after: 2 weeks
Discussed with: phk, cperciva
General head nod: silby
ServeRAID 4 - 7 models right now. Support for older cards is possible, but
I don't have any hardware to experiment with.
Thanks to Jack Hammer at Adaptec for providing debugging hints.
Sponsored by: ImproWare AG, Switzerland
sb_state shouldn't be erased, when socket buffer is flushed by sorflush().
When sb_state was bzero'ed, a recently set SBS_CANTRCVMORE flag was cleared.
If a socket was shutdown(SHUT_RD), a subsequent read() would block on it.
Reported by: Ed Maste, Gerrit Nagelhout
Reviewed by: rwatson
o Disable ofw_console(4), sab(4) and zs(4).
sab(4) and zs(4) are disabled because the hardware controlled by
them is handled by uart(4)+puc(4) and the latter combination is
functionally complete and up to date.
ofw_console(4) is disabled because it doesn't claim the device it
controls (through OFW) and thus interferes with puc(4)+uart(4),
which has sufficient knowledge to extract the necessary information
from OFW to setup the console. Put differently, ofw_console(4) is
not a proper device driver and can only do harm. Its functionality
is completely handled by uart(4).
This commit makes uart(4) the default driver for serial ports.
MFC after: 2 weeks
engineering the pending interrupt sources from the current
state of the controller. For channel A we can always read the
interrupt pending register (RR3). For channel B we can read
the interrupt vector register (RR2) because it contains the
modified vector and thus includes the interrupt source.
Since we currently need puc(4) for the Z8530, we know that
the interrupt handler for both channels will be called and
thus that RR3 will always be read at least once, even if ch A
has no pending interrupt.
NOTE: The modified interrupt vector has no value that represent
a lack of pending interrupt for channel B. That is, the
value read when no interrupts are pending is the same as the
value for the special receive condition. Fortunately, we don't
actually have to depend on that interrupt source. This does
mean that we need to properly handle the overflow condition,
when we read received character from the chip.
o The DSR signal is represented by the SYNC bit in the external
status register (RR0). We now properly track DSR.
o It's save to enable the external/status interrupt source. We
now get interrupts when line signals (DSR, DCD or CTS) change.
Problems fixes:
o interrupt storms.
o blocked open(2).
o lack of (hardware) flow control.
o unable to report DSR.
MFC after: 5 days
providing special version of CDIOCREADSUBCHANNEL ioctl(), which assumes that
result has to be placed into kernel space not user space. In the long run
more generic solution has to be designed WRT emulating various ioctl()s
that operate on userspace buffers, but right now there is only one such
ioctl() is emulated, so that it makes little sense.
MFC after: 2 weeks
copies arguments into the kernel space and one that operates
completely in the kernel space;
o use kernel-only version of execve(2) to kill another stackgap in
linuxlator/i386.
Obtained from: DragonFlyBSD (partially)
MFC after: 2 weeks
called in "open", causing mmap() to fail.
Where possible, pass size of file to vnode_create_vobject() rather
than having it find it out the hard way via VOP_LOOKUP
Reviewed by: phk
Add minor2unit() in addition to dev2unit() and unit2minor().
If it wasn't such a hazzle we should redefine minor numbers in
the kernel without the gap for the major number, but it's not worth
the bother (yet).
a process return to userspace if it had pending GEOM events.
We need to have the same check in the exit pass to catch the case
where a GEOM related filedescriptor is not explicitly closed by
the process.
Bumped into by: people using dd(1) to build releases, nanobsd etc.
thought. I'm unsure why I thought this was the case, but it
definitely isn't for this card. If another card with the other ID
makes an appearance, then we'll add a second entry for it.
# With this change my Olicom OC2220 is now working again, since I make
# this commit with that device. :-)
EtherJet, the interrupt is selected in the eeprom based on the layout
of the PC Card board. Since this is encoded into the EEPROM, and has
no relationship to the IRQ that the pccard bridge routes the PC Card's
interrupt pin to.
As such, stop writing to that register. This gets my EtherJet working.
# The eeprom reading code appears to be totally wrong for my EtherJet
# card. This causes the card to bogusly detect the media options
# available.
significant clean up and optimizations:
- don't call bioq_disksort() on every command, the hardware will do that for
us.
- remove all of the complicated bio deferral code. bio's that can't be
serviced immediately can just wait on the bioq.
- Only reserve one command object for doing control commands to the card.
This simplifies a lot of code and significantly reduces the size of the
command struct.
- Allocate commands out of a slab instead of embedding them into the softc.
- Call the command action method directly instead of having ips_get_free_cmd()
call it indirectly.
MFC After: 1 week
mmap() on NTFS files was hosed, returning pages offset from the
start of the disk rather than the start of the file. (ie, "cp" of
a 1-block file would get you a copy of the boot sector, not the
data in the file.) The solution isn't ideal, but gives a functioning
filesystem.
Cached vnode lookup was also broken, resulting in vnode haemorrhage.
A lookup on the same file twice would give you two vnodes, and the
resulting cached pages.
Just recently, mmap() was broken due to a lack of a call to
vnode_create_vobject() in ntfs_open().
Discussed with: phk@
null-modem tty device emulate the speed settings faithfully.
The speed is emulated independently for the two directions, using
the slower of the local sides ispeed and the remote sides ospeed.
The emulated speed takes settings of bits/char, parity and stopbit
into account.
Inspired by: The BSD-DK Editor Celebrity Deathmatch Contest
i386_{get,set}_ioperm() and make those APIs visible in the kernel namespace;
o use i386_{get,set}_ldt() and i386_{get,set}_ioperm() instead of sysarch()
in the linuxlator, which allows to kill another two stackgaps.
MFC after: 2 weeks
the interface when going to toggle VLAN support for
internal reasons. If the IFCAP_VLAN_HWTAGGING bit is
cleared, we should rely on the (re)init routine to turn
VLAN support off and never touch the relevant hardware bits.
This applies to other capability bits, too. The user
obviously has a reason for clearing a capability bit,
e.g., if his particular NIC is buggy and hangs if a
certain hardware capability is turned on even for a
fraction of a second.
The flag adapter->em_insert_vlan_header still is set or
reset irrespective of the IFCAP_VLAN_HWTAGGING setting,
as before, in order to handle the case when a user sets
promiscuous mode on an interface first and later turns
its IFCAP_VLAN_HWTAGGING bit on.
This change might look orthogonal to rev#1.85, but in fact
it is not. It introduces bugfixes that hopefully will make
implementing the general scheme mentioned in the commit
message of rev#1.85 easier.
configuration: it appears to work properly in the non-promiscuous case, but
we've not yet implemented a more general solution that maintains full
functionality with promiscuous mode enabled. While my hope is that we can
get one implemented soon, this will improve functionality substantially in
the mean time.
MFC after: 3 days
AX88190 ones, but that one only minorly):
o don't set flags in the match routine. They appear to be cleared
when probe/attach is called. Before this change, they were
always treated as a simple ne2000, which would fail to get the
right NIC address.
o Lookup device again in the probe routine and probe based on the
cards that you see.
o Detect and report the DL10022 seprately from the DL10019 cards.
While I'm here:
o remove a bad printf
o change another bad printf to device_printf.
o minor style(9) formatting tweaks.
# note: a lot of OEM entries are in the ed_pccard_products such that we can
# likely remove, or collapse, many of them.
This makes all of my DL100xx cards at least probe the ethernet address
correctly, which it wasn't doing before. I can't seem to locate my
AX88xxx based cards, so those haven't been tested, but they were
busted before the change so they can't be any worse now...
address, and additional information. Then the printing of the
ethernet address was moved into ether_attach, and so we were printing
orphaned information about the card. Now the probe message is
prefixed by edX:. Prepare for it to move under bootverbose, but don't
move it there yet (the || 1 trick).
from the userland and pushes results back and the second which does
actual processing. Use the latter to eliminate stackgap in the linux wrapper
of that syscall.
MFC after: 2 weeks
versions of the Racore PC Card Ethernet card. Rearrange to reflect
this reality. This ejects IODATA from 0x1bf, which belongs to Racore.
Thanks to Wilko for providing me with a dumpcis for the DEPCM card.
Also, added Nextcom Nexthawk card from NetBSD
pops data from the userland and pushes results back and the second which does
actual processing. Use the latter to eliminate stackgap in the linux wrappers
of those syscalls.
MFC after: 2 weeks
attributes in casts (i.e. foo = (__stdcall sometype)bar). This only
happens in two places where we need to set up function pointers, so
work around the problem with some void pointer magic.
missed that when the vnode bypass was introduced.
Deal with zero length transfers before we even get to fo_ops->fo_read().
Found by: Slawa Olhovchenkov <slwzxy.spb.ru@zxy.spb.ru>
PR: 75758
