Bring the obsolete man page up to date:
* update diagnostic error messages
* add documentation of loader tunables
* document netmap support
* add a driver history section
* update the contact information
Submitted by: Artur Rojek <ar@semihalf.com>
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
This is usually an error caused by using an absolute path in SRCS. This
happened to me in 83c20b8a2d due to changing LDADD to SRCS.
I did not notice that this had created a .o file inside the source tree
since .gitignore contains "*.o" and therefore git did not report any
changes.
Adding this warning message to bsd.lib.mk/bsd.prog.mk should prevent
issues like this in the future.
There was exactly one case of an absolute OBJS path in the current source
tree but that was removed in e713d3a013.
Reviewed By: emaste (earlier version), imp
Differential Revision: https://reviews.freebsd.org/D28467
Document aspects of system time keeping. Hz is the nominal rate that we
interrupt the system and is known and the 'tick' period of 1 / hz.
hardclock is the routine that does various bits of timekeeping. stathz
and profhz are documented as historical relics that are deprecated
and replaced by hwpmc.4 and others.
Reviewed by: phk@, mav@ and gnn@ (previous version)
Obtained from: hardclock.9 from NetBSD (with FreeBSD adjustments)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30802
Accept the old rc.conf variable if the new one is not present for
compatability.
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D30806
Codify our standard practice with $FreeBSD$
o New code only needs it if it might land in stable/12
o Old code should retain it until stable/12 is unsupported
o We'll do a bulk remove in the future: don't do it proactively.
o Give advice about how to tag files derived from other files
in the tree.
Reviewed by: bcr, allanjude,ceri
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30789
Qualcomm makes the GOBI devices, and gobi_loader port supports all the
Qualcomm GOBI 1000 and 2000 devices with the MDM1000 and MDM2000
chipsets. And likely the 3000 as well, though that's not been tested
on FreeBSD.
Submitted by: zarychtam@plan-b.pwste.edu.pl
Sponsored by: Netflix
The gobi_loader port has been committed. Add a reference to it instead
of the upstream project since the port has changes needed to run on
FreeBSD that aren't yet part of upstream.
Sponsored by: Netflix
Document that the u3g driver supports the Panasonic CF-F9 GOBI. Note
that gobi_loader is needed and give URL for that. There is a separate
review for during a related version into a port at D22938, but it seems
stalled. I'll update the docs when it arrives in ports.
Sponsored by: Netflix
In the CVS days this used be a wrapper around either CVS or CVSup and
used to support updating src, doc, and ports checkouts. With the move
to subversion this only supported updating src and was itself a
wrapper around 'svn update'. With Git, users are probably better off
using appropriate Git commands directly to update without needing an
explicit make target as a wrapper.
Reviewed by: bcr, imp, emaste
Differential Revision: https://reviews.freebsd.org/D30736
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30678
Reviewed by: imp (earlier version), adrian (earlier version)
MFC after: 3 days
Sponsored by: Diablotin Systems
Note that the 80 column rule has been relaxed for some time when things
are clearer when a little longer. Add in that things that people grep
for, such as error messages, shouldn't be broken up which is the most
common reason people exceed 80 columns intentionally.
Reviewed by: jhb, domagoj.stolfa@gmail.com
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30255
Once upon a time, #define<tab> was cultural thing. However, even when it
was promulgated, it was a minority usage. 20 years ago the split was
30k/69k (tab/space) and today the split is 80k/546k (tab/space). Update
guidance to allow either with the usual suggestion to be consistent
within a file.
Reviewed by: sef, allenjude, 0mp (prior rev), jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30254
Many people are used to gnu configure's behavior of changing
--with-foo=no to --without-foo. At the same time, several folks have
WITH_FOO=no in their config files to enable this ironic form of the
option because of an old meme from IRC, a mailing list or the forums (I
forget which). Add a warning to allow to alert people w/o breaking POLA.
Reviewed by: allanjude, bdrewery, manu
MFC After: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30684
Previously it was only installed on i386 and amd64.
Reviewed By: emaste, gbe (manpages)
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30546
Create a casper service for netdb functions.
Initially only cap_getprotobyname is implemented.
This is needed for capsicumizing sockstat.
Reviewed by: oshogbo, bcr (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24832
The 'nodup' option forces fdescfs to return real vnode behind file
descriptor instead of the fdescfs fd vnode, on lookup. The end result
is that e.g. stat("/dev/fd/3") returns the stat data for the underlying
vnode, if any. Similarly, fchdir(2) works in the expected way.
For open(2), if applied over file descriptor opened with O_PATH, it
effectively re-open that vnode into normal file descriptor which has the
specified access mode, assuming the current vnode permissions allow it.
If the file descriptor does not reference vnode, the behavior is unchanged.
This is done by a mount option, because permission check on open(2) breaks
established fdescfs open semantic of dup(2)-ing the descriptor. So it
is not suitable for /dev/fd mount.
Tested by: Andrew Walker <awalker@ixsystems.com>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30140
Also improve temporary file usage in 200.accounting, add an xref to
zstd(1) to newsyslog.conf.5, and clarify in periodic.conf that
"daily accounting" means process accounting and "monthly accounting"
is login accounting.
PR: 253868
Reviewed by: allanjude
Approved by: blackend (mentor)
Differential Revision: https://reviews.freebsd.org/D29267
Currently, this will still hash the default (all zero) hostuuid and
potentially arrive at a MAC address that has a high chance of collision
if another interface of the same name appears in the same broadcast
domain on another host without a hostuuid, e.g., some virtual machine
setups.
Instead of using the default hostuuid, just treat it as a failure and
generate a random LA unicast MAC address.
Reviewed by: bz, gbe, imp, kbowling, kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29788
This KPI is used to assign a MAC address to an interface that doesn't
already have one assigned.
Reviewed by: bcr, gnn, imp, kbowling, kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29787
The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.
This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:
1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.
2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.
3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.
This is in preparation for the next wpa update from w1.fi.
Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Also, add stbool.h to libprocstat modules which #define _KERNEL
before including sys/mount.h. Otherwise they'll pull in sys/types.h
before defining _KERNEL and therefore won't have the bool definition
they need for mp_busy.
Reviewed By: kib, markj
Differential Revision: https://reviews.freebsd.org/D30556
'Intel Centrino Wireless-N 6250' is listed twice in the description
section of the manual page.
PR: 256257
Reported by: Daniel Cervus <danielthedeer at outlook dot com>
MFC after: 3 days
Parts of libprocstat like to pretend they're kernel components for the
sake of including mount.h, and including sys/types.h in the _KERNEL
case doesn't fix the build for some reason. Revert both the
VFS_QUOTACTL() change and the follow-up "fix" for now.
Instead of requiring all implementations of vfs_quotactl to unbusy
the mount for Q_QUOTAON and Q_QUOTAOFF, add an "mp_busy" in/out param
to VFS_QUOTACTL(9). The implementation may then indicate to the caller
whether it needed to unbusy the mount.
Reviewed By: kib, markj
Differential Revision: https://reviews.freebsd.org/D30218
