To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
A more correct way to modernize code that uses __progname is to just
replace each occurance of it with a call to getprogname(3)
Reported by: ian
Reviewed by: imp
be executed in the if() conditional. If its not supposed to be printed
inside the conditional, then the braces should be removed and the extra
tabs on the fprintf() should be removed.
Noted by cross compilation with gcc-mips.
SVN r280384 updated the maximum password length from 16 bytes to 255. The
manual was not updated to reflect this. Found while working on kern/207069.
MFC after: 3 days
X-MFC-to: stable/11 stable/10
Sponsored by: Smule, Inc.
- add static in a number of places
- initialize __progname rather than rely on magical extern values
- use nitems() instead of manually spelling it out
- unshadow 'idi'
- teach 'error' that it is '__dead2'
- add missing 'break'
Allocation explicitely initialized the 3 leading fields. The rest is an
array which is supposed to be NULL-ed prior to deallocation.
Delegate zeroing to the infrequently called object initializator.
This gets rid of one of the most common memset consumers.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D15989
- remove param: unused since r95357.
- correct definition of usage
- add explicit fallthrough notice. The existing one doesn't work with
our selection of "implicit-fallthrough" strictness.
This results in WARNS=6 building on amd64, but not other arches
It is no longer necessary to specify a -4/-6 flag on any ntp.conf
keyword. The address type is inferred from the address itself as
necessary. "restrict default" statements always apply to both address
families regardless of any -4/-6 flag that may be present.
So this change just tidies up our default config by removing the redundant
restrict -6 statement and comment, and by removing the -6 flag from the
restrict keyword that allows access from localhost.
This change was inspired by the patches provided in PRs 201803 and 210245,
and included some contrib/ntp code inspection to verify that the -4/-6
keywords are basically no-ops in all contexts now.
PR: 201803 210245
Differential Revision: https://reviews.freebsd.org/D15974
and set up the hardware accordingly on each transfer. This replaces the old
configuration done via sysctl, and allows both fdt configuration data and
userland control via the spigen device to work.
Submitted by: Bob Frazier
Differential Revision: https://reviews.freebsd.org/D15031
property for spi devices, although in the spigen case it's expected that
the speed will be overridden at runtime via the ioctl interface. A very
conservative 500khz speed is used (I've never seen a spi device that
couldn't run at 1mhz).
This also fixes -mio with 'T' set (thread-id instead of process-id).
This can go further by removing the existing sprintf, and using sbuf
directly. This will be done in a followup commit.
Add documentation and symlinks for OF_getprop_alloc_multi
and OF_getencprop_alloc_multi functions.
Also while here fix copy-pasted .Dt value and add one more
failure condition for OF_getencprop_alloc.
r332341 introduced OF_getencprop_alloc_multi that should be used
instead of OF_getencprop_alloc to get multi-cell properties.
Fix example to reflect this change.
aesni(4) allocates a contiguous buffer for the data it processes if the
provided input was not already virtually contiguous, and copies the input
there. It performs encryption or decryption in-place.
r324037 removed the logic that then copied the processed data back to the
user-provided input buffer, breaking {de,enc}crypt for mbuf chains or
iovecs with more than a single descriptor.
PR: 228094 (probably, not confirmed)
Submitted by: Sean Fagan <kithrup AT me.com>
Reported by: Emeric POUPON <emeric.poupon AT stormshield.eu>
X-MFC-With: 324037
Security: could result in plaintext being output by "encrypt"
operation
The test for checking if the clock have a mux was inverted and the mask
to calculate the parent index was wrong was wrong too.
It means that upon creation the incorrect parent was resolved as the current
one and upon reparent the switch was never made.
Pointy hat (lots of them): manu
The call to reclaim_pv_chunk() in reserve_pv_entries() may free a
PV chunk with free entries belonging to the current pmap. In this
case we must account for the free entries that were reclaimed, or
reserve_pv_entries() may return without having reserved the requested
number of entries.
Reviewed by: alc, kib
Tested by: pho (previous version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15911
prefetch on 64bit architectures. Prior to this, two lines were needed
for the fast path and each line may fetch an unused adjacent neighbor.
- Move fields used by the fast path into a single line.
- Move constants into the adjacent line which is mostly used for
the spare bucket alloc 'medium path'.
- Unpad the mtx which is only used by the fast path and place it in
a line with rarely used data. This aligns the cachelines better and
eliminates 128 bytes of wasted space.
This gives a 45% improvement on a will-it-scale test on a 24 core machine.
Reviewed by: mmacy
If EARLY_AP_STARTUP is not defined it is possible for an epoch to be
allocated prior to it being possible to call epoch_call without
issue.
Based on patch by andrew@
PR: 229014
Reported by: andrew
There is no documented reason for this not to be shown on the first run.
I can't find any good reason, and it breaks batch mode.
PR: 218889
Submitted by: "Jeremy C. Reed" <reed@reedmedia.net>
The final 'mv' to install a fetched leap-list file can fail (due to a
readonly fs, or schg flags, for example), and that leads to mv(1)
prompting the user, stopping the boot process. Instead, use mv -f
to supress the prompting, and if verbose mode is on, emit a warning
that the existing file cannot be replaced.
PR: 219255
r330610 relocated the DMAP from the base of memory to the base of the fourth
quadrant of memory. This broke synthetic traps, such as KDB forced
breakpoints. Use GET_TOCBASE() so the DMAP offset is handled.
Submitted by: git_bdragon.rkt0.net
Differential Revision: https://reviews.freebsd.org/D15973
Most NFSv4.1 compound RPCs start with a Sequence operation. For these
cases, save the slotid and note that it is saved by setting ND_HASSLOTID.
This is used by r335568 to free up the session slot and disable it.
MFC after: 2 weeks
r335568 uses a flag called ND_HASSLOTID to indicate that the slotid is set,
so it can free and invalidate it.
This flag needs to be set, which will be done in a subsequent commit.
MFC after: 2 weeks
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
When a "soft" mount is used for NFSv4.1, an RPC that fails without completing
will leave a slot in the NFSv4.1 session in an indeterminate state.
As such, all that can be done is free up the slot while making is no longer
usable.
A "soft" NFSv4.1 mount is not recommended in general, since it will leave
Open/Lock state in an indeterminate state. An exception is a pNFS mount of
a DS, since there are no Opens/Locks done for them except file creates
where loss of the Open state does not matter.
The patch also makes connections to DSs soft, so that they will fail when
a DS is non-functional or network partitioned, allowing the pNFS MDS to disable
the DS for a mirrored configuration.
This patch should not affect normal "hard" NFSv4.1 mounts.
MFC after: 2 weeks
When the NFSv4.1 pNFS client gets an error for a DS I/O operation using a
Flexible File layout, it returns the layout with an error.
This patch changes the code slightly, so that it returns the layout for all
errors except EACCES and lets the MDS decide what to do based on the error.
It also makes a couple of changes to nfscl_layoutrecall() to ensure that
the first layoutreturn(s) will have the error in the reply.
Plus, the patch adds a wakeup() so that the "nfscl" thread won't wait 1sec
before doing the LayoutReturn.
Tested against the pNFS service.
This patch should not affect non-pNFS use of the client.
The unused "dsp" argument will be used by a future patch that disables the
connection to the DS when possible.
MFC after: 2 weeks
For a pNFS MDS server, there must be mounts done to the DSs before the
nfsd is started. Adding the REQUIRE line makes sure these are done.
If there are NFS mounts in /etc/fstab that cannot be completed before
the nfsd starts, the "bg" mount option can still be used to handle that.
I do not believe this should cause problems for non-pNFS NFS servers.
(I have requested a review by rc@, but it is still pending.)
The changes made in r326573 required that messages always start with an
RFC 3164 timestamp. It looks like certain devices, but also certain
logging libraries (Python 3's "logging" package) simply don't generate
RFC 3164 formatted messages containing a timestamp.
Make timestamps optional again. When the timestamp is missing, also
assume that the message contains no hostname. The first word of the
message likely already belongs to the message payload.
PR: 229236
Reported by: Michael Grimm & Marek Zarychta
Reviewed by: glebius (cursory)
MFC after: 1 week
By adding spigen-rpi{2,-b}.dtso to fdt_overlays= in loader.conf, the fdt data
will set up the correct pinmux and device nodes to create a spigen(4) device
for each available chipselect pin.
Submitted by: Bob Frazier
Differential Revision: https://reviews.freebsd.org/D15067
This effectively reverts r335449 and changes the previous MK_LLD_IS_LD
to a MK_LLD_BOOTSTRAP check. If !TOOLS_PREFIX then these sources are
always built for llvm-objdump, lld, and llvm-cov. When TOOLS_PREFIX
is set then they are only needed if lld is being bootstrapped.
Reported by: dim
Pointyhat to: bdrewery
Sponsored by: Dell EMC
