Similar to r366897, this uses the .incbin directive to pull in a
firmware file's contents into a .fwo file. The same scheme for
computing symbol names from the filename is used as before to maximize
compatiblity and not require rebuilding existing .fwo files for
NO_CLEAN builds. Using ld -o binary requires extra hacks in linkers
to either specify ABI options (e.g. soft- vs hard-float) or to ignore
ABI incompatiblities when linking certain objects (e.g. object files
with only data). Using the compiler driver avoids the need for these
hacks as the compiler driver is able to set all the appropriate ABI
options.
Reviewed by: imp, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27579
Since we do not own the session lock, a parallel killjobc() might
reset s_leader to NULL after we checked it. Read s_leader only once
and ensure that compiler is not allowed to reload.
While there, make access to t_session somewhat more pretty by using
local variable.
PR: 251915
Submitted by: Jakub Piecuch <j.piecuch96@gmail.com>
MFC after: 1 week
refcount_acquire_if_not_zero returns true on saturation.
The case of 0 is handled by looping again, after which the originally
found pointer will no longer be there.
Noted by: kib
p_fd nullification in fdescfree serializes against new threads transitioning
the count 1 -> 2, meaning that fdescfree_fds observing the count of 1 can
safely assume there is nobody else using the table. Losing the race and
observing > 1 is harmless.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27522
To export information from fd tables we have several loops which do
this:
FILDESC_SLOCK(fdp);
for (i = 0; fdp->fd_refcount > 0 && i <= lastfile; i++)
<export info for fd i>;
FILDESC_SUNLOCK(fdp);
Before r367777, fdescfree() acquired the fd table exclusive lock between
decrementing fdp->fd_refcount and freeing table entries. This
serialized with the loop above, so the file at descriptor i would remain
valid until the lock is dropped. Now there is no serialization, so the
loops may race with teardown of file descriptor tables.
Acquire the exclusive fdtable lock after releasing the final table
reference to provide a barrier synchronizing with these loops.
Reported by: pho
Reviewed by: kib (previous version), mjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27513
cpuset_modify() would not currently catch this, because it only checks that
the new mask is a subset of the root set and circumvents the EDEADLK check
in cpuset_testupdate().
This change both directly validates the mask coming in since we can
trivially detect an empty mask, and it updates cpuset_testupdate to catch
stuff like this going forward by always ensuring we don't end up with an
empty mask.
The check_mask argument has been renamed because the 'check' verbiage does
not imply to me that it's actually doing a different operation. We're either
augmenting the existing mask, or we are replacing it entirely.
Reported by: syzbot+4e3b1009de98d2fabcda@syzkaller.appspotmail.com
Discussed with: andrew
Reviewed by: andrew, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27511
The race plays out like so between threads A and B:
1. A ref's cpuset 10
2. B does a lookup of cpuset 10, grabs the cpuset lock and searches
cpuset_ids
3. A rel's cpuset 10 and observes the last ref, waits on the cpuset lock
while B is still searching and not yet ref'd
4. B ref's cpuset 10 and drops the cpuset lock
5. A proceeds to free the cpuset out from underneath B
Resolve the race by only releasing the last reference under the cpuset lock.
Thread A now picks up the spinlock and observes that the cpuset has been
revived, returning immediately for B to deal with later.
Reported by: syzbot+92dff413e201164c796b@syzkaller.appspotmail.com
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27498
cpuset_rel_defer() is supposed to be functionally equivalent to
cpuset_rel() but with anything that might sleep deferred until
cpuset_rel_complete -- this setup is used specifically for cpuset_setproc.
Add in the missing unr free to match cpuset_rel. This fixes a leak that
was observed when I wrote a small userland application to try and debug
another issue, which effectively did:
cpuset(&newid);
cpuset(&scratch);
newid gets leaked when scratch is created; it's off the list, so there's
no mechanism for anything else to relinquish it. A more realistic reproducer
would likely be a process that inherits some cpuset that it's the only ref
for, but it creates a new one to modify. Alternatively, administratively
reassigning a process' cpuset that it's the last ref for will have the same
effect.
Discovered through D27498.
MFC after: 1 week
They were only modified to accomodate a redundant assertion.
This runs into problems as lockless lookup can still try to use the vnode
and crash instead of getting an error.
The bug was only present in kernels with INVARIANTS.
Reported by: kevans
This is a valid scenario that's handled in the various protocol layers where
it makes sense (e.g., tcp_disconnect and sctp_disconnect). Given that it
indicates we should immediately drop the connection, it makes little sense
to sleep on it.
This could lead to panics with INVARIANTS. On non-INVARIANTS kernels, this
could result in the thread hanging until a signal interrupts it if the
protocol does not mark the socket as disconnected for whatever reason.
Reported by: syzbot+e625d92c1dd74e402c81@syzkaller.appspotmail.com
Reviewed by: glebius, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27407
As of r365978, minidumps include a copy of dump_avail[]. This is an
array of vm_paddr_t ranges. libkvm walks the array assuming that
sizeof(vm_paddr_t) is equal to the platform "word size", but that's not
correct on some platforms. For instance, i386 uses a 64-bit vm_paddr_t.
Fix the problem by always dumping 64-bit addresses. On platforms where
vm_paddr_t is 32 bits wide, namely arm and mips (sometimes), translate
dump_avail[] to an array of uint64_t ranges. With this change, libkvm
no longer needs to maintain a notion of the target word size, so get rid
of it.
This is a no-op on platforms where sizeof(vm_paddr_t) == 8.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27082
hw.physmem tunable allows to limit number of physical memory available to the
system. It's handled in machdep files for x86 and PowerPC. This patch adds
required logic to the consolidated physmem management interface that is used by
ARM, ARM64, and RISC-V.
Submitted by: Klara, Inc.
Reviewed by: mhorne
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D27152
Prior to the patch returning selfdfree could still be racing against doselwakeup
which set sf_si = NULL and now locks stp to wake up the other thread.
A sufficiently unlucky pair can end up going all the way down to freeing
select-related structures before the lock/wakeup/unlock finishes.
This started manifesting itself as crashes since select data started getting
freed in r367714.
Right now, if lio registered zero jobs, syscall frees lio job
structure, cleaning up queued ksi. As result, the realtime signal is
dequeued and never delivered.
Fix it by allowing sendsig() to copy ksi when job count is zero.
PR: 220398
Reported and reviewed by: asomers
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27421
A pair of bugs are believed to have caused the hangs described in the
commit log message for r364744:
1. uma_reclaim() could trigger reclamation of the reserve of boundary
tags used to avoid deadlock. This was fixed by r366840.
2. The loop in vmem_xalloc() would in some cases try to allocate more
boundary tags than the expected upper bound of BT_MAXALLOC. The
reserve is sized based on the value BT_MAXMALLOC, so this behaviour
could deplete the reserve without guaranteeing a successful
allocation, resulting in a hang. This was fixed by r366838.
PR: 248008
Tested by: rmacklem
Refactor sysctl_sysctl_next_ls():
* Move huge inner loop out of sysctl_sysctl_next_ls() into a separate
non-recursive function, returning the next step to be taken.
* Update resulting node oid parts only on successful lookup
* Make sysctl_sysctl_next_ls() return boolean success/failure instead of errno,
slightly simplifying logic
Reviewed by: freqlabs
Differential Revision: https://reviews.freebsd.org/D27029
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
Apparently some architectures, like ppc in its hashed page tables
variants, account mappings by pmap_qenter() in the response from
pmap_is_page_mapped().
While there, eliminate useless userp variable.
Noted and reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27409
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
Restructure the loop a little bit to make it a little more clear how it
really operates: we never allocate any domains at the beginning of the first
iteration, and it will run until we've satisfied the amount we need or we
encounter an error.
The lock is now taken outside of the loop to make stuff inside the loop
easier to evaluate w.r.t. locking.
This fixes it to not try and allocate any domains for the freelist under the
spinlock, which would have happened before if we needed any new domains.
Reported by: syzbot+6743fa07b9b7528dc561@syzkaller.appspotmail.com
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27371
There is no reason why vp->v_object cannot be NULL. If it is, it's
fine, handle it by delegating to VOP_READ().
Tested by: pho
Reviewed by: markj, mjg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27327
- VFS_UNMOUNT() requires vn_start_write() around it [*].
- call VFS_PURGE() before unmount.
- do not destroy mp if cleanup unmount did not succeed.
- set MNTK_UNMOUNT, and indicate forced unmount with MNTK_UNMOUNTF
for VFS_UNMOUNT() in cleanup.
PR: 251320 [*]
Reported by: Tong Zhang <ztong0001@gmail.com>
Reviewed by: markj, mjg
Discussed with: rmacklem
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27327
The commited patch was incomplete.
- add back missing goto retry, noted by jhb
- 'if (error)' -> 'if (error != 0)'
- consistently do:
if (error != 0)
break;
continue;
instead of:
if (error != 0)
break;
else
continue;
This adds some 'continue' uses which are not needed, but line up with the
rest of pipe_write.
The current logic is a fine choice for a system administrator modifying
process cpusets or a process creating a new cpuset(2), but not ideal for
processes attaching to a jail.
Currently, when a process attaches to a jail, it does exactly what any other
process does and loses any mask it might have applied in the process of
doing so because cpuset_setproc() is entirely based around the assumption
that non-anonymous cpusets in the process can be replaced with the new
parent set.
This approach slightly improves the jail attach integration by modifying
cpuset_setproc() callers to indicate if they should rebase their cpuset to
the indicated set or not (i.e. cpuset_setproc_update_set).
If we're rebasing and the process currently has a cpuset assigned that is
not the containing jail's root set, then we will now create a new base set
for it hanging off the jail's root with the existing mask applied instead of
using the jail's root set as the new base set.
Note that the common case will be that the process doesn't have a cpuset
within the jail root, but the system root can freely assign a cpuset from
a jail to a process outside of the jail with no restriction. We assume that
that may have happened or that it could happen due to a race when we drop
the proc lock, so we must recheck both within the loop to gather up
sufficient freed cpusets and after the loop.
To recap, here's how it worked before in all cases:
0 4 <-- jail 0 4 <-- jail / process
| |
1 -> 1
|
3 <-- process
Here's how it works now:
0 4 <-- jail 0 4 <-- jail
| | |
1 -> 1 5 <-- process
|
3 <-- process
or
0 4 <-- jail 0 4 <-- jail / process
| |
1 <-- process -> 1
More importantly, in both cases, the attaching process still retains the
mask it had prior to attaching or the attach fails with EDEADLK if it's
left with no CPUs to run on or the domain policy is incompatible. The
author of this patch considers this almost a security feature, because a MAC
policy could grant PRIV_JAIL_ATTACH to an unprivileged user that's
restricted to some subset of available CPUs the ability to attach to a jail,
which might lift the user's restrictions if they attach to a jail with a
wider mask.
In most cases, it's anticipated that admins will use this to be able to,
for example, `cpuset -c -l 1 jail -c path=/ command=/long/running/cmd`,
and avoid the need for contortions to spawn a command inside a jail with a
more limited cpuset than the jail.
Reviewed by: jamie
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D27298
cpuset_init() is better descriptor for what the function actually does. The
name was previously taken by a sysinit that setup cpuset_zero's mask
from all_cpus, it was removed in r331698 before stable/12 branched.
A comment referencing the removed sysinit has now also been removed, since
the setup previously done was moved into cpuset_thread0().
Suggested by: markj
MFC after: 1 week
Currently, it must always allocate a new set to be used for passing to
_cpuset_create, but it doesn't have to. This is purely kern_cpuset.c
internal and it's sparsely used, so just change it to use *setp if it's
not-NULL and modify the two consumers to pass in the address of a NULL
cpuset.
This paves the way for consumers that want the unr allocation without the
possibility of sleeping as long as they've done their due diligence to
ensure that the mask will properly apply atop the supplied parent
(i.e. avoiding the free_unr() in the last failure path).
Reviewed by: jamie, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27297
All paths leading into closefp() will either replace or remove the fd from
the filedesc table, and closefp() will call fo_close methods that can and do
currently sleep without regard for the possibility of an ERESTART. This can
be dangerous in multithreaded applications as another thread could have
opened another file in its place that is subsequently operated on upon
restart.
The following are seemingly the only ones that will pass back ERESTART
in-tree:
- sockets (SO_LINGER)
- fusefs
- nfsclient
Reviewed by: jilles, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27310
Adding to zombie list can be perfomed by idle threads, which on ppc64 leads to
panics as it requires a sleepable lock.
Reported by: alfredo
Reviewed by: kib, markj
Fixes: r367842 ("thread: numa-aware zombie reaping")
Differential Revision: https://reviews.freebsd.org/D27288
Exec and exit are same as corresponding eventhandler hooks.
Thread exit hook is called somewhat earlier, while thread is still
owned by the process and enough context is available. Note that the
process lock is owned when the hook is called.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27309
As far as I can tell, this has been the case since initially committed in
2008. cpuset_setproc is the executor of cpuset reassignment; note this
excerpt from the description:
* 1) Set is non-null. This reparents all anonymous sets to the provided
* set and replaces all non-anonymous td_cpusets with the provided set.
However, reviewing cpuset_setproc_setthread() for some jail related work
unearthed the error: if tdset was not anonymous, we were replacing it with
`set`. If it was anonymous, then we'd rebase it onto `set` (i.e. copy the
thread's mask over and AND it with `set`) but give the new anonymous set
the original tdset as the parent (i.e. the base of the set we're supposed to
be leaving behind).
The primary visible consequences were that:
1.) cpuset_getid() following such assignment returns the wrong result, the
setid that we left behind rather than the one we joined.
2.) When a process attached to the jail, the base set of any anonymous
threads was a set outside of the jail.
This was initially bundled in D27298, but it's a minor fix that's fairly
easy to verify the correctness of.
A test is included in D27307 ("badparent"), which demonstrates the issue
with, effectively:
osetid = cpuset_getid()
newsetid = cpuset()
cpuset_setaffinity(thread)
cpuset_setid(osetid)
cpuset_getid(thread) -> observe that it matches newsetid instead of osetid.
MFC after: 1 week
Providing these in freebsd32.h facilitates local testing/measuring of the
structs rather than forcing one to locally recreate them. Sanity checking
offsets/sizes remains in kern_umtx.c where these are typically used.
oldfde may be invalidated if the table has grown due to the operation that
we're performing, either via fdalloc() or a direct fdgrowtable_exp().
This was technically OK before rS367927 because the old table remained valid
until the filedesc became unused, but now it may be freed immediately if
it's an unshared table in a single-threaded process, so it is no longer a
good assumption to make.
This fixes dup/dup2 invocations that grow the file table; in the initial
report, it manifested as a kernel panic in devel/gmake's configure script.
Reported by: Guy Yur <guyyur gmail com>
Reviewed by: rew
Differential Revision: https://reviews.freebsd.org/D27319
This patch takes advantage of the consolidation that happened to provide two
flags that can be used with the native _umtx_op(2): UMTX_OP___32BIT and
UMTX_OP__I386.
UMTX_OP__32BIT iindicates that we are being provided with 32-bit structures.
Note that this flag alone indicates a 64bit time_t, since this is the
majority case.
UMTX_OP__I386 has been provided so that we can emulate i386 as well,
regardless of whether the host is amd64 or not.
Both imply a different set of copyops in sysumtx_op. freebsd32__umtx_op
simply ignores the flags, since it's already doing a 32-bit operation and
it's unlikely we'll be running an emulator under compat32. Future work
could consider it, but the author sees little benefit.
This will be used by qemu-bsd-user to pass on all _umtx_op calls to the
native interface as long as the host/target endianness matches, effectively
eliminating most if not all of the remaining unresolved deadlocks for most.
This version changed a fair amount from what was under review, mostly in
response to refactoring of the prereq reorganization and battle-testing
it with qemu-bsd-user. The main changes are as follows:
1.) The i386 flag got renamed to omit '32BIT' since this is redundant.
2.) The flags are now properly handled on 32-bit platforms to emulate other
32-bit platforms.
3.) Robust list handling was fixed, and the 32-bit functionality that was
previously gated by COMPAT_FREEBSD32 is now unconditional.
4.) Robust list handling was also improved, including the error reported
when a process has already registered 32-bit ABI lists and also
detecting if native robust lists have already been registered. Both
scenarios now return EBUSY rather than EINVAL, because the input is
technically valid but we're too busy with another ABI's lists.
libsysdecode/kdump/truss support will go into review soon-ish, along with
the associated manpage update.
Reviewed by: kib (earlier version)
MFC after: 3 weeks
During the life of a process, new file descriptor tables may be allocated. When
a new table is allocated, the old table is placed in a free list and held onto
until all processes referencing them exit.
When a new file descriptor table is allocated, the old file descriptor table
can be freed when the current process has a single-thread and the file
descriptor table is not being shared with any other processes.
Reviewed by: kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D18617
While there, do some minor cleanup for kclocks. They are only
registered from kern_time.c, make registration function static.
Remove event hooks, they are not used by both registered kclocks.
Add some consts.
Perhaps we can stop registering kclocks at all and statically
initialize them.
Reviewed by: mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27305
There is no point in dynamic registration, umtx hook is there always.
Reviewed by: mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27303
There are message based controllers that can bind interrupts even if they are
not implemented as root controllers (such as the ITS subblock of GIC).
MFC after: 3 weeks
All reads and writes are serialized with a hand-rolled lock, but unlocking it
always wakes up all waiters. Existing flag fields get resized to make room for
introduction of waiter counter without growing the struct.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27273
Suppose a running callout re-arms itself, and before the callout
finishes running another CPU calls callout_drain() and goes to sleep.
softclock_call_cc() will wake up the draining thread, which may not run
immediately if there is a lot of CPU load. Furthermore, the callout is
still in the callout wheel so it can continue to run and re-arm itself.
Then, suppose that the callout migrates to another CPU before the
draining thread gets a chance to run. The draining thread is in this
loop in _callout_stop_safe():
while (cc_exec_curr(cc) == c) {
CC_UNLOCK(cc);
sleep();
CC_LOCK(cc);
}
but after the migration, cc points to the wrong CPU's callout state.
Then the draining thread goes off and removes the callout from the
wheel, but does so using the wrong lock and per-CPU callout state.
Fix the problem by doing a re-lookup of the callout CPU after sleeping.
Reported by: syzbot+79569cd4d76636b2cc1c@syzkaller.appspotmail.com
Reported by: syzbot+1b27e0237aa22d8adffa@syzkaller.appspotmail.com
Reported by: syzbot+e21aa5b85a9aff90ef3e@syzkaller.appspotmail.com
Reviewed by: emaste, hselasky
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27266
There are many cases where one would choose avoid entering the debugger
on a normal panic, opting instead to reboot and possibly save a kernel
dump. However, recursive kernel panics are an unusual case that might
warrant attention from a human, so provide a secondary tunable,
debug.debugger_on_recursive_panic, to allow entering the debugger only
when this occurs.
For for simplicity in maintaining existing behaviour, the tunable
defaults to zero.
Reviewed by: cem, markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27271
The current global list is a significant problem, in particular induces a lot
of cross-domain thread frees. When running poudriere on a 2 domain box about
half of all frees were of that nature.
Patch below introduces per-domain thread data containing zombie lists and
domain-aware reaping. By default it only reaps from the current domain, only
reaping from others if there is free TID shortage.
A dedicated callout is introduced to reap lingering threads if there happens
to be no activity.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D27185
pipes get stated all thet time and this avoidably contributed to contention.
The pipe lock is only held to accomodate MAC and to check the type.
Since normally there is no probe for pipe stat depessimize this by having the
flag.
The pipe_state field gets modified with locks held all the time and it's not
feasible to convert them to use atomic store. Move the type flag away to a
separate variable as a simple cleanup and to provide stable field to read.
Use short for both fields to avoid growing the struct.
While here short-circuit MAC for pipe_poll as well.
The arm configs that required it have been removed from the tree.
Removing this option makes the callout code easier to read and
discourages developers from adding new configs without eventtimer
drivers.
Reviewed by: ian, imp, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27270
The suser_enable sysctl allows to remove a privileged rights from uid 0.
This change introduce per jail setting which allow to make root a
normal user.
Reviewed by: jamie
Previous version reviewed by: kevans, emaste, markj, me_igalic.co
Discussed with: pjd
Differential Revision: https://reviews.freebsd.org/D27128
- Mask out recently added VV_* bits to avoid printing them twice.
- Keep VI_LOCKed on the same line as the rest of the flags.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27261
A copy-pasto left us copying in 24-bytes at the address of the rb pointer
instead of the intended target.
Reported by: sigsys@gmail.com
Sighing: kevans
The two flags are distinct and it is impossible to correctly handle clone(2)
without the assistance of fork1(). This change depends on the pwddesc split
introduced in r367777.
I've added a fork_req flag, FR2_SHARE_PATHS, which indicates that p_pd
should be treated the opposite way p_fd is (based on RFFDG flag). This is a
little ugly, but the benefit is that existing RFFDG API is preserved.
Holding FR2_SHARE_PATHS disabled, RFFDG indicates both p_fd and p_pd are
copied, while !RFFDG indicates both should be cloned.
In Chrome, clone(2) is used with CLONE_FS, without CLONE_FILES, and expects
independent fd tables.
The previous conflation of CLONE_FS and CLONE_FILES was introduced in
r163371 (2006).
Discussed with: markj, trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D27016
No functional change intended.
Tracking these structures separately for each proc enables future work to
correctly emulate clone(2) in linux(4).
__FreeBSD_version is bumped (to 1300130) for consumption by, e.g., lsof.
Reviewed by: kib
Discussed with: markj, mjg
Differential Revision: https://reviews.freebsd.org/D27037
As this ABI is still fresh (r367287), let's correct some mistakes now:
- Version the structure to allow for future changes
- Include sender's pid in control message structure
- Use a distinct control message type from the cmsgcred / sockcred mess
Discussed with: kib, markj, trasz
Differential Revision: https://reviews.freebsd.org/D27084
One of the last shifts inadvertently moved these static assertions out of a
COMPAT_FREEBSD32 block, which the relevant definitions are limited to.
Fix it.
Pointy hat: kevans
All of the compat32 variants are substantially the same, save for
copyin/copyout (mostly). Apply the same kind of technique used with kevent
here by having the syscall routines supply a umtx_copyops describing the
operations needed.
umtx_copyops carries the bare minimum needed- size of timespec and
_umtx_time are used for determining if copyout is needed in the sem2_wait
case.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27222
Specifically, if we're waking up some value n > BATCH_SIZE, then the
copyin(9) is wrong on the second iteration due to upp being the wrong type.
upp is currently a uint32_t**, so upp + pos advances it by twice as many
elements as it should (host pointer size vs. compat32 pointer size).
Fix it by just making upp a uint32_t*; it's still technically a double
pointer, but the distinction doesn't matter all that much here since we're
just doing arithmetic on it.
Add a test case that demonstrates the problem, placed with the libthr tests
since one messing with _umtx_op should be running these tests. Running under
compat32, the new test case will hang as threads after the first 128 get
missed in the wake. it's not immediately clear how to hit it in practice,
since pthread_cond_broadcast() uses a smaller (sleepq batch?) size observed
to be around ~50 -- I did not spend much time digging into it.
The uintptr_t change makes no functional difference, but i've tossed it in
since it's more accurate (semantically).
Reported by: Andrew Gierth (andrew_tao173.riddles.org.uk, inspection)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27231
Add __unused to some args.
Change type of the iterator variables to match loop control.
Remove excessive {}.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27220
This moves entire large alloc handling out of all consumers, apart from
deciding to go there.
This is a step towards creating a fast path.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27198
Since thread_zone is marked NOFREE the thread_fini callback is never
executed, meaning memory allocated by seltdinit is never released.
Adding the call to thread_dtor is not sufficient as exiting processes
cache the main thread.
Refcounting was added to combat a race between selfdfree and doselwakup,
but it adds avoidable overhead.
selfdfree detects it can free the object by ->sf_si == NULL, thus we can
ensure that the condition only holds after all accesses are completed.
The global array has prohibitive performance impact on multicore systems.
The same data (and more) can be obtained with dtrace.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27199
Restart syscalls and some sync operations when filesystem indicated
ERELOOKUP condition, mostly for VOPs operating on metdata. In
particular, lookup results cached in the inode/v_data is no longer
valid and needs recalculating. Right now this should be nop.
Assert that ERELOOKUP is catched everywhere and not returned to
userspace, by asserting that td_errno != ERELOOKUP on syscall return
path.
In collaboration with: pho
Reviewed by: mckusick (previous version), markj
Tested by: markj (syzkaller), pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26136
The routine does not serve any practical purpose.
Memory can be allocated in many other ways and most consumers pass the
M_WAITOK flag, making malloc not fail in the first place.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27143
This works for amd64, but none others -- drop it, because we already have a
proper definition in sys/compat/freebsd32/freebsd32.h that correctly uses
time32_t.
MFC after: 1 week
This gets rid of the most contended spinlock seen when creating/destroying
threads in a loop. (modulo kstack)
Tested by: alfredo (ppc64), bdragon (ppc64)
First, funsetownlst() list looks at the first element of the list to see
whether it's processing a process or a process group list. Then it
acquires the global sigio lock and processes the list. However, nothing
prevents the first sigio tracker from being freed by a concurrent
funsetown() before the sigio lock is acquired.
Fix this by acquiring the global sigio lock immediately after checking
whether the list is empty. Callers of funsetownlst() ensure that new
sigio trackers cannot be added concurrently.
Second, fsetown() uses funsetown() to remove an existing sigio structure
from a file object. However, funsetown() uses a racy check to avoid the
sigio lock, so two threads may call fsetown() on the same file object,
both observe that no sigio tracker is present, and enqueue two sigio
trackers for the same file object. However, if the file object is
destroyed, funsetown() will only remove one sigio tracker, and
funsetownlst() may later trigger a use-after-free when it clears the
file object reference for each entry in the list.
Fix this by introducing funsetown_locked(), which avoids the racy check.
Reviewed by: kib
Reported by: pho
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27157
Note this still does not scale but is enough to move it out of the way
for the foreseable future.
In particular a trivial benchmark spawning/killing threads stops contesting
on tidhash.
This in particular unbreaks rtkit.
The limitation was a leftover of previous state, to quote a
comment:
/*
* Though lwpid is unique, only current process is supported
* since there is no efficient way to look up a LWP yet.
*/
Long since then a global tid hash was introduced to remedy
the problem.
Permission checks still apply.
Submitted by: greg_unrelenting.technology (Greg V)
Differential Revision: https://reviews.freebsd.org/D27158
There are workloads with very bursty tid allocation and since unr tries very
hard to have small-sized bitmaps it keeps reallocating memory. Just doing
buildkernel gives almost 150k calls to free coming from unr.
This also gets rid of the hack which tried to postpone TID reuse.
Reviewed by: kib, markj
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27101
The intent is to replace the current id allocation method and a known upper
bound will be useful.
Reviewed by: kib (previous version), markj (previous version)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D27100
imgact_binmisc matches magic/mask from imgp->image_header, which is only a
single page in size mapped from the first page of an image. One can specify
an interpreter that matches on, e.g., --offset 4096 --size 256 to read up to
256 bytes past the mapped first page.
The limitation is that we cannot specify a magic string that exceeds a
single page, and we can't allow offset + size to exceed a single page
either. A static assert has been added in case someone finds it useful to
try and expand the size, but it does seem a little unlikely.
While this looks kind of exploitable at a sideways squinty-glance, there are
a couple of mitigating factors:
1.) imgact_binmisc is not enabled by default,
2.) entries may only be added by the superuser,
3.) trying to exploit this information to read what's mapped past the end
would be worse than a root canal or some other relatably painful
experience, and
4.) there's no way one could pull this off without it being completely
obvious.
The first page is mapped out of an sf_buf, the implementation of which (or
lack thereof) depends on your platform.
MFC after: 1 week
access the socket send or receive buffer. This is not possible for
listening sockets since r319722.
Because send()/recv() calls fail on listening sockets, fail also ioctl()
indicating EINVAL.
PR: 250366
Reported by: Yong-Hao Zou
Reviewed by: glebius, rscheff
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D26897
The offset we need to account for in the interpreter string comes in two
variants:
1. Fixed - macros other than #a that will not vary from invocation to
invocation
2. Variable - #a, which is substitued with the argv0 that we're replacing
Note that we don't have a mechanism to modify an existing entry. By
recording both of these offset requirements when the interpreter is added,
we can avoid some unnecessary calculations in the exec path.
Most importantly, we can know up-front whether we need to grab
calculate/grab the the filename for this interpreter. We also get to avoid
walking the string a first time looking for macros. For most invocations,
it's a swift exit as they won't have any, but there's no point entering a
loop and searching for the macro indicator if we already know there will not
be one.
While we're here, go ahead and only calculate the argv0 name length once per
invocation. While it's unlikely that we'll have more than one #a, there's no
reason to recalculate it every time we encounter an #a when it will not
change.
I have not bothered trying to benchmark this at all, because it's arguably a
minor and straightforward/obvious improvement.
MFC after: 1 week
This adds a dedicated counter updated with atomics when INVARIANTS
is used. As a side effect one can reliably determine the lock is held
for reading by at least one thread, but it's still not possible to
find out whether curthread has the lock in said mode.
This should be good enough in practice.
Problem spotted by avg.
This doesn't change anything at the moment since the out-of-order elements
were a pair of uint32_t, but future additions may have caused unnecessary
padding by following the existing precedent.
MFC after: 1 week
If we hadn't been traced in the first place when syscallenter()
started executing, we can ignore TDB_USERWR. TDB_USERWR can get set,
sure, but if it does, it's because the debugger raced with the syscall,
and it cannot depend on winning that race.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26585
This module handles relatively few execs (initial qemu-user-static, then
qemu-user-static handles exec'ing itself for binaries it's already running),
but all execs pay the price of at least taking the relatively expensive
sx/slock to check for a match when this module is loaded. Future work will
almost certainly swap this out for another lock, perhaps an rmslock.
The RLOCK/WLOCK phrasing was chosen based on what the callers are really
wanting, rather than using the verbiage typically appropriate for an sx.
MFC after: 1 week
We may want to reserve bits in the future for kernel-only use, so start
rejecting any that aren't the two that we're currently expecting from
userland.
MFC after: 1 week
Previously, non-preemptible epochs could not check; in_epoch() would always
fail, usually because non-preemptible epochs don't imply THREAD_NO_SLEEPING.
For default epochs, it's easy enough to verify that we're in the given
epoch: if we're in a critical section and our record for the given epoch
is active, then we're in it.
This patch also adds some additional INVARIANTS bookkeeping. Notably, we set
and check the recorded thread in epoch_enter/epoch_exit to try and catch
some edge-cases for the caller. It also checks upon freeing that none of the
records had a thread in the epoch, which may make it a little easier to
diagnose some improper use if epoch_free() took place while some other
thread was inside.
This version differs slightly from what was just previously reviewed by the
below-listed, in that in_epoch() will assert that no CPU has this thread
recorded even if it *is* currently in a critical section. This is intended
to catch cases where the caller might have somehow messed up critical
section nesting, we can catch both if they exited the critical section or if
they exited, migrated, then re-entered (on the wrong CPU).
Reviewed by: kib, markj (both previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27098
Notably, streamline error paths through the existing 'done' label, making it
easier to quickly verify correct cleanup.
Future work might add a kernel-only flag to indicate that a interpreter uses
#a. Currently, all executions via imgact_binmisc pay the penalty of
constructing sname/fname, even if they will not use it. qemu-user-static
doesn't need it, the stock rc script for qemu-user-static certainly doesn't
use it, and I suspect these are the vast majority of (if not the only)
current users.
MFC after: 1 week
According to code comments the original motivation was to allow for
malloc_type_internal changes without ABI breakage. This can be trivially
accomplished by providing spare fields and versioning the struct, as
implemented in the patch below.
The upshots are one less memory indirection on each alloc and disappearance
of mt_zone.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27104
This ensures that no writes are pending in memory, either metadata or
user data, but not including dirty pages not yet converted to fs writes.
Only filesystems declared local are suspended.
Note that this does not guarantee absence of the metadata errors or
leaks if resume is not done: for instance, on UFS unlinked but opened
inodes are leaked and require fsck to gc.
Reviewed by: markj
Discussed with: imp
Tested by: imp (previous version), pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D27054
Sample usage: kernel modules can decide whether to stick to malloc or
create their own zone.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27097
The 2 provided zones had inconsistent naming between each other
("int" and "64") and other allocator zones (which use bytes).
Follow malloc by naming them "pcpu-" + size in bytes.
This is a step towards replacing ad-hoc per-cpu zones with
general slabs.
On a sample box vmstat -z shows:
ITEM SIZE LIMIT USED FREE REQ
64: 64, 0, 1043784, 4367538,3698187229
selfd: 64, 0, 1520, 13726,182729008
But at the same time:
vm.uma.selfd.keg.domain.1.pages: 121
vm.uma.selfd.keg.domain.0.pages: 121
Thus 242 pages got pulled even though the malloc zone would likely accomodate
the load without using extra memory.
- Removed a bunch of redundant headers
- Don't explicitly initialize to 0
- The !error check prior to setting imgp->interpreter_name is redundant, all
error paths should and do return or go to 'done'. We have larger problems
otherwise.
Linux allows polling without any events specified and it happens to be the case
in FreeBSD as well. POLLHUP has to be delivered regardless of the event mask
and this works fine if the condition is already present. However, if it is
missing, selrecord is only called if the eventmask has relevant bits set. This
in particular leads to a conditon where pipe_poll can return 0 events and
neglect to selrecord, while kern_poll takes it as an indication it has to go to
sleep, but then there is nobody to wake it up.
While the problem seems systemic to *_poll handlers the least we can do is fix
it up for pipes.
Reported by: Jeremie Galarneau <jeremie.galarneau at efficios.com>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27094
Previously the code had one wait channel for all pending writers.
This could result in a buggy scenario where after a writer switches
the lock mode form readers to writers goes off CPU, another writer
queues itself and then the last reader wakes up the latter instead
of the former.
Use a separate channel.
While here add features to reliably detect whether curthread has
the lock write-owned. This will be used by ZFS.
