For RoCE, when CM requests are received for RC and UD connections,
netdevice of the incoming request is unavailable. Because of that CM
requests are always forwarded to init_net namespace.
Now that we have the GID index available, introduce SGID index in
incoming CM requests and refer to the netdevice of it.
While at it fix some incorrect uses of init_net and make sure
the rdma_create_id() function stores the VNET it is passed.
Based on linux commit:
cee104334c98dd04e9dd4d9a4fa4784f7f6aada9
MFC after: 3 days
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
In r337943 ifnet's if_pcp was set to the PCP value in use
instead of IFNET_PCP_NONE.
Current ibcore code assumes that if_pcp is IFNET_PCP_NONE with
VLAN interfaces so it can identify prio-tagged traffic.
Fix that by explicitly verifying that that the if_type is IFT_ETHER
and not IFT_L2VLAN.
MFC after: 3 days
Approved by: re (Marius), hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
Else a NULL VNET pointer should be ignored. This fixes address resolving
when VIMAGE is disabled.
MFC after: 3 days
Sponsored by: Mellanox Technologies
The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive
the port number from user input as part of its attributes and assumes
it is valid. Down on the stack, that parameter is used to access kernel
data structures. If the value is invalid, the kernel accesses memory
it should not. To prevent this, verify the port number before using it.
Linux commit:
5ecce4c9b17bed4dc9cb58bfb10447307569b77b
a62ab66b13a0f9bcb17b7b761f6670941ed5cd62
5a7a88f1b488e4ee49eb3d5b82612d4d9ffdf2c3
MFC after: 1 week
Sponsored by: Mellanox Technologies
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Linux commit:
2975d5de6428ff6d9317e9948f0968f7d42e5d74
09abfe7b5b2f442a85f4c4d59ecf582ad76088d7
84652aefb347297aa08e91e283adf7b18f77c2d5
MFC after: 1 week
Sponsored by: Mellanox Technologies
When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.
The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.
Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.
The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().
MFC after: 1 week
Sponsored by: Mellanox Technologies
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>
Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Linux commit:
be1d325a335840a86c133a56c6a911c368bac0fd
1c3aea2bc8f0b2e5b57375ead40457ff75a3a2ec
MFC after: 1 week
Sponsored by: Mellanox Technologies
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.
It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.
This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.
This commit combines the following Linux upstream commits:
IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch ensures the GID index is always used as a basis of resolving
incoming RDMA connections, as compared to the GID value itself.
Background:
On a per infiniband port basis, the GID identifier is not a unique identifier!
This assumption falls apart when VLAN ID, IPv6 scope ID and RoCE type,
as supported by RoCE v2, is taken into account. This additional
information is stored in the so-called GID attributes and is needed to
correctly identify the destination network interface for an incoming
connection.
Different VLANs are allowed to define the same IPv4 addresses and especially
for the default IPv6 link-local addresses or when using so-called containers
or jails, this is true.
The VNET information for the destination network interface is needed in
order to perform the L2 address lookup in the right Virtual Network Stack
context.
Consequently old functions previously used by RoCE v1, like
rdma_addr_find_smac_by_sgid() are impossible to support, because
there can be multiple identical GIDs associated with the same
infiniband port, and the answer to such a request becomes undefined.
This function has been removed.
MFC after: 1 week
Sponsored by: Mellanox Technologies
compilation under FreeBSD. The mthca driver was temporarily removed as
part of the Linux 4.9 RoCE/infinband upgrade.
Top commit in Linux source tree:
69973b830859bc6529a7a0468ba0d80ee5117826
Sponsored by: Mellanox Technologies
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore
Reviewed by: np @
Differential Revision: https://reviews.freebsd.org/D12563
Sponsored by: Mellanox Technologies
MFC after: 3 days
This patch currently supports:
- ibcore as a kernel module only
- krping as a kernel module only
- ipoib as a kernel module only
Sponsored by: Mellanox Technologies
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.
- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.
- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.
- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.
- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .
Sponsored by: Mellanox Technologies
- Added check that the SCOPE ID is only restored for IPv6 linklocal
addresses.
- Changes made by r237263 in the "cma_bind_addr()" function did not
check if the socket address was of type IPv6 and used the IPv4
socket address for IPv6 addresses. This caused the function to
fail. Fixed this.
- In the "rdma_gid2ip()" function and some other places the "sin6_len"
and "sin6_scope_id" fields were not set for IPv6 socket
addresses. Fixed this.
- The scope ID is not stored as part of the GID entries and must be
passed as an argument to "rdma_gid2ip()".
- Added new method to "struct ib_device" which returns a pointer to
the network interface which belongs to the given infiniband
device. This is needed to be able to get the scope ID for IPv6
addresses via the associated ethernet interface.
- Added convenience function, "rdma_get_ipv6_scope_id()", to get the
scope ID for IPv6 addresses.
- Implemented new "get_netdev" method for mlx4ib. Other IB controller
drivers which want to support IPv6 addresses needs to implement this
aswell.
- Bumped the FreeBSD version due to changing "struct ib_device".
Sponsored by: Mellanox Technologies
MFC after: 1 week
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
- Added support for dumping the SFP EEPROM content to dmesg.
- Fixed handling of network interface capability IOCTLs.
- Fixed race when loading and unloading the mlxen driver by applying
appropriate locking.
- Removed two unused C-files.
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4283
- Move all files related to the LinuxKPI into sys/compat/linuxkpi and
its subfolders.
- Update sys/conf/files and some Makefiles to use new file locations.
- Added description of COMPAT_LINUXKPI to sys/conf/NOTES which in turn
adds the LinuxKPI to all LINT builds.
- The LinuxKPI can be added to the kernel by setting the
COMPAT_LINUXKPI option. The OFED kernel option no longer builds the
LinuxKPI into the kernel. This was done to keep the build rules for
the LinuxKPI in sys/conf/files simple.
- Extend the LinuxKPI module to include support for USB by moving the
Linux USB compat from usb.ko to linuxkpi.ko.
- Bump the FreeBSD_version.
- A universe kernel build has been done.
Reviewed by: np @ (cxgb and cxgbe related changes only)
Sponsored by: Mellanox Technologies
- Remove redundant NBLONG macro and use BIT_WORD()
and BIT_MASK() instead.
- Correctly define BIT_MASK() according to Linux and
update all users of this macro.
- Add missing GENMASK() macro.
- Remove all comments deriving from Linux.
Sponsored by: Mellanox Technologies
- Redefine DIV_ROUND_UP as a function macro taking two arguments
instead of none.
- Implement more Linux kernel functions related to various forms
of DELAY() and basic mathematical operations.
Sponsored by: Mellanox Technologies
- Define the kref structure identical to the one found in Linux.
- Update clients referring inside the kref structure.
- Implement kref_sub() for FreeBSD.
Reviewed by: np @
Sponsored by: Mellanox Technologies