Some of the patches we are preparing for porting ATF from NetBSD
refer to '/usr/libexec' several times. Instead of repeating the
path all over the place, add ${LIBEXECDIR} to match ${LIBDATADIR}
and reduce the redundancy of the relevant makefiles.
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Approved by: ru
MFC after: 1 month
then that target is invoked for each architecture rather than the
default action of building world and kernels for each architecture.
- Add a 'make toolchains' wrapper which uses UNIVERSE_TARGET to build
toolchains for all architectures.
- Document JFLAG, MAKE_JUST_KERNELS, and MAKE_JUST_WORLDS variables for
'make universe'.
Reviewed by: bz
MFC after: 1 week
version of it. There is also a WG311v3 which uses a chipset covered by
malo(4). Along the way add the WG311T to the list which is also an
atheros chipset.
PR: docs/154589
Approved by: kib (mentor)
MFC after: 3 days
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.
Reviewed by: kib
sbuf_new_for_sysctl(9). This allows using an sbuf with a SYSCTL_OUT
drain for extremely large amounts of data where the caller knows that
appropriate references are held, and sleeping is not an issue.
Inspired by: rwatson
Properly document what `make targets` is supposed to list to avoid
further confusion given the place the target sits. Should have happened
with r217125.
Requested by: imp [1]
Reviewed by: rwatson
may still return a non-zero value... You are not guaranteed to get a one
to one mapping between wakeup_one and zero return values...
Reviewed by: kib
MFC after: 3 days
reading. (This was already done for writing to a sysctl). This
requires all SYSCTL setups to specify a type. Most of them are now
checked at compile-time.
Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).
Succested by: bde
option. We only support ro mounts for xfs, so it's nice if the examples
we show in the manpage are easy to copy/paste.
PR: docs/149106
Submitted by: amdmi3
MFC after: 3 days
dialog is distributed from GPLv2 to LGPLv2 and introduces a number of new
features and a new and better libdialog API. The existing libdialog will
be kept temporarily as libodialog for compatibility purposes until sade,
sysinstall and tzsetup have been either updated or replaced.
__FreeBSD_version is now 900030.
Discussed on: -current
Approved by: core
Obtained from: http://invisible-island.net/dialog
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
Although not directly related the FreeBSD Foundation funded "Five New TCP
Congestion Control Algorithms for FreeBSD" project, the understanding and
inspiration required to write this documentation was significantly bolstered
by the Foundation's support.
Reviewed by: pjd
MFC after: 1 week
section and recording the date these commit bits were returned. Also, sort
the remaining entries, and add a node for mheinen, who is already referenced
within the mentor relationships.
Other doc committers are encouraged to add themselves, and any mentor/mentee
relationships. The current rendered output is available at
http://people.freebsd.org/~gavin/comm-doc.png
relationships, so they are rendered as more than just a username.
Add a couple of relationships between committers who already have existing
nodes to help with the rendered output.
to let the compiler optimize for the famility of UltraSPARC-III CPUs as the
default already was to optimize for UltraSPARC-I/II and generating generic
64-bit V9 is mainly for reference purposes. At least for SPARC64-V CPUs
code optimized for UltraSPARC-I/II still is the most performant one.
Thanks go to Michael Moll for testing SPARC64-V.
- Move a booke MACHINE_CPU bit into the right section.
for all FDT-enabled kernels, and having it off by default means that
building these kernels fails by default. This fixes FDT-related build
failures in make universe on ARM and PowerPC.
Reviewed by: imp
This allows specifying a %job (which is equivalent to the corresponding
process group).
Additionally, it improves reliability of kill from sh in high-load
situations and ensures "kill" finds the correct utility regardless of PATH,
as required by POSIX (unless the undocumented %builtin mechanism is used).
Side effect: fatal errors (any error other than kill(2) failure) now return
exit status 2 instead of 1. (This is consistent with other sh builtins, but
not in NetBSD.)
Code size increases about 1K on i386.
Obtained from: NetBSD
i386, how to configure the kernel, and some known issues. Further
refinement almost certainly required. This is not a Xen installation
manual.
MFC after: 3 days
Sponsored by: DARPA, AFRL
i386, how to configure the kernel, and some known issues. Further
refinement almost certainly required. This is not a Xen installation
manual.
MFC after: 3 days
Sponsored by: DARPA, AFRL
Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.
PR: kern/80980
Discussed with: jhb
case user wants to implement his own actions and doesn't want the attributes to
vanish.
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 3 days
only happen if VOP_INACTIVATE() drops the vnode lock, which is quite
unreasonable behaviour for filesystem, and should not be mentioned
in the description of VFS primitives.
MFC after: 1 week
media option generally should be used instead. Actually I think the lists
of media types should be removed from the manual pages of MAC drivers
altogether and users just pointed to the output of `ifconfig -m` instead;
even before r215297 there were several outdated descriptions, technically
it's wrong most of the time as not the MAC drivers support these media
types but actually the PHY drivers do and it generally doesn't make sense
to maintain these lists in every manual page of a driver as the media is
auto-detected.
This was removed in 2001 but I think it is appropriate to add it back:
* I do not want to encourage people to write fragile and non-portable echo
commands by making printf much slower than echo.
* Recent versions of Autoconf use it a lot.
* Almost no software still wants to support systems that do not have
printf(1) at all.
* In many other shells printf is already a builtin.
Side effect: printf is now always the builtin version (which behaves
identically to /usr/bin/printf) and cannot be overridden via PATH (except
via the undocumented %builtin mechanism).
Code size increases about 5K on i386. Embedded folks might want to replace
/usr/bin/printf with a hard link to /usr/bin/alias.
.mk file so they can be reused.
Introduce a new option, CRUNCH_BUILDTOOLS, which lists the binaries that
require tools built in the local architecture. sh and csh both require this.
It was previously hardcoded in rescue/rescue/Makefile .
Introduce a new option, CRUNCH_SHLIBS, which lists the shared libraries
to link against. These override the static libraries listed in CRUNCH_LIBS.
Some build environments may wish to use a handful of shared libraries
(eg libc.so) so other small, dynamic binaries can be run in the environment.
Remove the now-shared code from rescue/rescue/Makefile and introduce the
CRUNCH_BUILDTOOLS option for the above shells.
group on a object has less permissions that everyone). These
permissions will not work reliably over NFS if you have more than
14 supplemental groups and are usually not what you mean.
MFC after: 1 week
svn r147332 (by jeff): "Don't make vgonel() globally visible".
While here, specify the vnode locking scheme for vgone().
Discussed on: freebsd-hackers@
Approved by: kib (mentor)
MFC after: 10 days
and updated comments in the usb_quirk.h header file.
The main purpose of this is to expose the quirks for ejecting 3G
modules. usb_modeswitch in Linux does a great job of collecting
information on these, and with the quirks module people can try out the
modeswitch config file entries on FreeBSD, hence the SCSI strings in the
man page.
MFC after: 2 weeks
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).
TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.
Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.
UPDATING information will be forthcoming. Any remaining rough edges
will be hammered out in -current.
numbers. bge(4) supports too many models such that it's
unreasonable to list all these controllers in one line description
of name. While I'm here mention that BCM590x/BCM5779x is Fast
Ethernet controller.
bge(4) still lacks support for some controllers but supporting
these controllers should be easy now and adding new controllers
do not require touching .Nd any more.
Obtained from: OpenBSD
supported device. re(4) had been supported all variants of RTL8168,
RTL8111 and RTL810x. I think this change will cover all controllers
supported by re(4).
MFC after: 1 week
- FILES section ref: ~/nsmb.conf
- use of password in examples section
- use of simple encryption for password in examples section
PR: docs/132311
Submitted by: David Horn (dhorn2000 at gmail dot com)
Patch corrected by: trhodes
Approved by: trhodes
MFC after: 5 days
existing code caused problems with some SCSI controllers.
A new sysctl kern.cam.ada.spindown_shutdown has been added that controls
whether or not to spin-down disks when shutting down.
Spinning down the disks unloads/parks the heads - this is
much better than removing power when the disk is still
spinning because otherwise an Emergency Unload occurs which may cause damage
to the actuator.
PR: kern/140752
Submitted by: olli
Reviewed by: arundel
Discussed with: mav
MFC after: 2 weeks
It's a bit more pedantic regarding .Bl list elements. This has an added
benefit of unbreaking the ipfw(8) manpage, where groff was silently
skipping one list element.
Note that this still seems to be a little bit confusing as the concept of
"master" is different from what people would expect on a networking
equipment.
rounding. The same value can also be obtained with uma_zone_get_max, but this
change avoids a caller having to make two back-to-back calls.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jhb
- Add uma_zone_get_cur which returns the current approximate occupancy of
a zone. This is useful for providing stats via sysctl amongst other things.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jhb
MFC after: 2 weeks
controller, but make it optional.
After a problem report from Andrew Boyer, it looks like the LSI
chip may have issues (the watchdog timer fired) if too many aborts
are sent down to the chip at the same time. We know that task
management commands are serialized, and although the manual doesn't
say it, it may be a good idea to just send one at a time.
But, since I'm not certain that this is necessary, add a tunable
and sysctl variable (hw.mps.%d.allow_multiple_tm_cmds) to control
the driver's behavior.
mps.c: Add support for the sysctl and tunable, and add a
comment about the possible return values to
mps_map_command().
mps_sas.c: Run all task management commands through two new
routines, mpssas_issue_tm_request() and
mpssas_complete_tm_request().
This allows us to optionally serialize task
management commands. Also, change things so that
the response to a task management command always
comes back through the callback. (Before it could
come via the callback or the return value.)
mpsvar.h: Add softc variables for the list of active task
management commands, the number of active commands,
and whether we should allow multiple active task
management commands. Add an active command flag.
mps.4: Describe the new sysctl/loader tunable variable.
Sponsored by: Spectra Logic Corporation
A new function prep_devname() sanitizes a device name by removing
leading and redundant sequential slashes. The function returns an error
for names which already exist or are considered invalid.
A new flag MAKEDEV_CHECKNAME for make_dev_p(9) and make_dev_credf(9)
indicates that the caller is prepared to handle an error related to the
device name. An invalid name triggers a panic if the flag is not
specified.
Document the MAKEDEV_CHECKNAME flag in the make_dev(9) manual page.
Idea from: kib
Reviewed by: kib
Wrap lines for SiS and Promise entries to 80 columns.
This doesn't change appearance in page rendered with troff or man.cgi.
PR: docs/146195
Approved by: kib (mentor)
MFC after: 1 week
- Add "children" [1]
- Add "acknowledgement", "acknowledgment", "Austria" and "haunted" [2]
- Add "near", "antidisestablishmentarianism" and "Persephone" [2]
- "Transvaal" should be capitalized [2]
- Correct spelling of "structurelessness" and "Athena" [2]
- Add missing atomic elements [3]
- Add various words from "word of the day" lists [3]
PR: conf/149756 [1]
Submitted by: Nick Johnson <freebsd spatula.net> [1]
Obtained from: NetBSD [2], OpenBSD [3]
MFC after: 1 week
bcm4306 cards are ambiguous. BCM4306 rev 2 requires bwi. BCM4306 rev
3 will work with either. Since we can't easily determine which is
which, just remove them.
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively. When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first. If it is found, it reads and installs it as
a policy table. If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.
When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.
The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.
Discussed with: ume and bz
