Commit Graph

148169 Commits

Author SHA1 Message Date
Sam Leffler
0a310468af partially fix mode setting; this no longer returns an error but still
needs to handle the case where the vap is up+running

Noticed by:	"Paul B. Mahol" <onemda@gmail.com>
2009-06-02 20:00:43 +00:00
Jung-uk Kim
3c4bac86de Fix include path fixup for contrib/dev/acpica/include/platform/*.h. 2009-06-02 20:00:32 +00:00
Andrew Thompson
e13e19fa23 Place the fifo and ref counting variables on the stack to prevent races.
Submitted by:	Hans Petter Selasky
2009-06-02 19:28:26 +00:00
Sam Leffler
5c600a90de move if_detach to the top of ieee80211_ifdetach to close various races
Reviewed by:	jhb
2009-06-02 18:55:27 +00:00
Jung-uk Kim
a9f12690a1 MFV: ACPICA 20090521 2009-06-02 18:53:21 +00:00
Sam Leffler
c9dd371765 move ifq_detach from if_detach to if_free; this permits callers to
reference if_snd in the period between detach+free which helps simplify
detach code

Reviewed by:	jhb, rwatson
2009-06-02 18:53:21 +00:00
Robert Watson
bd875f5f13 Remove MAC kernel config files and add "options MAC" to GENERIC, with the
goal of shipping 8.0 with MAC support in the default kernel.  No policies
will be compiled in or enabled by default, but it will now be possible to
load them at boot or runtime without a kernel recompile.

While the framework is not believed to impose measurable overhead when no
policies are loaded (a result of optimization over the past few months in
HEAD), we'll continue to benchmark and optimize as the release approaches.
Please keep an eye out for performance or functionality regressions that
could be a result of this change.

Approved by:	re (kensmith)
Obtained from:	TrustedBSD Project
2009-06-02 18:31:08 +00:00
Pawel Jakub Dawidek
923f9901b4 Initialize iov and iovlen before use.
Reported by:	Lucius Windschuh <lwindschuh@googlemail.com>
2009-06-02 18:30:09 +00:00
Robert Watson
f93bfb23dc Add internal 'mac_policy_count' counter to the MAC Framework, which is a
count of the number of registered policies.

Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.

This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.

Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.

Obtained from:	TrustedBSD Project
2009-06-02 18:26:17 +00:00
Ulf Lilleengen
fd02a3b5c9 - Use volatile for signal variables.
Suggested by:	Jaakko Heinonen <jh -at- saunalahti.fi>
2009-06-02 17:57:24 +00:00
Andrew Thompson
115df0b6d2 Reorgansise the logic for tranversing the pipe list.
Submitted by:	Hans Petter Selasky
2009-06-02 17:31:59 +00:00
Andrew Thompson
017eb6e4b2 Fix compile after the removal of bsd_udev.
Submitted by:	Hans Petter Selasky
2009-06-02 17:31:16 +00:00
Andrew Thompson
a488edb567 Fix multithread issue where the is_uref variable was not set and cleared
properly in the CDEV private data.

Submitted by:	Hans Petter Selasky
2009-06-02 17:30:18 +00:00
Andrew Thompson
7b8b6d352f Staticize ukbd_detach and fix indentation.
Submitted by:	Sylvestre Gallon
2009-06-02 17:29:15 +00:00
Xin LI
9ceb784eaf Re-enable WARNS=6 after my universe test. 2009-06-02 17:27:54 +00:00
Andrew Thompson
545b01ad3a Add libusb20_tr_get_length to get the transfer length.
Submitted by:	Hans Petter Selasky
2009-06-02 17:27:51 +00:00
Sam Leffler
1da89db5d6 Remove hack used to deal with ifnet teardown now that if_detach and the
bridge do a better job.
o move ether_ifdetach to the top of ieee80211_detach
o do not clear if_softc at the top of ieee80211_detach; we no longer need
  this because we are safeguarded against calls coming back through if_ioctl
o simplify the bpf tracker now that we don't null if_softc

This also fixes an issue where having a bpf consumer active when a vap
is destroyed would cause a crash because bpf referenced free'd memory.

Reviewed by:	imp
2009-06-02 16:57:27 +00:00
Andrew Gallatin
869c7348e5 Buf-ring fixes for mxge
- always maintain byte/mcast/drop stats via drbr
- move #define of IFNET_BUF_RING so that its picked
  up by all files in the driver
- conditionalize IFNET_BUF_RING on the FreeBSD_version
  bump just after it appeared in the tree.

Sponsored by: Myricom Inc.
2009-06-02 16:52:33 +00:00
Warner Losh
37c3e5226c In bwi_newstate, only zero the bssid when we stop a STA. And only
when we've not stopped the card.  It hangs the system when we touch
the CSR after bwistop.

This fixes the hanging on kldunload.
2009-06-02 16:48:10 +00:00
Robert Watson
e499bd28dd Remove unneeded include.
MFC after:	3 days
2009-06-02 15:59:46 +00:00
Ed Schouten
89f98d57d6 Remove window(1) from the base system.
Some time ago Tom Rhodes sent me an email that he was willing to perform
various cleanups to the window(1) source code. After some discussion, we
both decided the best thing to do, was to move window(1) to the ports
tree. The application isn't used a lot nowadays, mainly because it has
been superseeded by screen, tmux, etc.

A couple of hours ago Tom committed window(1) to ports (misc/window), so
I'm removing it from the tree. I don't think people will really miss it,
but I'm describing the change in UPDATING anyway.

Discussed with:	trhodes, pav, kib
Approved by:	re
2009-06-02 13:44:36 +00:00
Attilio Rao
f083018223 Handle lock recursion differenty by always checking against LO_RECURSABLE
instead the lock own flag itself.

Tested by:	pho
2009-06-02 13:03:35 +00:00
John Baldwin
11632ace3a Include <machine/stdarg.h> for va_*(). I'm not sure how this compiled
on amd64 without this.
2009-06-02 12:35:04 +00:00
Robert Watson
63fbf5047e Add support for the four PUC serial interfaces found on IBM SurePOS 300
series POS terminals.

MFC after:	3 days
Submitted by:	Marc Balmer <marc at msys.ch>
2009-06-02 09:58:17 +00:00
Alan Cox
3c33df624c Correct a boundary case error in the management of a page's dirty bits by
shm_dotruncate() and vnode_pager_setsize().  Specifically, if the length of
a shared memory object or a file is truncated such that the length modulo
the page size is between 1 and 511, then all of the page's dirty bits were
cleared.  Now, a dirty bit is cleared only if the corresponding block is
truncated in its entirety.
2009-06-02 08:02:27 +00:00
Brian Somers
045e970615 Rather than using both -prune (which requires directory-first tree traversal)
and -delete (which implies depth-first traversal), avoid using -delete in
favour of -execdir.

This has a side-effect of not removing directories that contain files,
even if we delete all of those files, but IMHO that's a better option
than specifying all possible local filesystem types in this script.

PR:		122811
MFC after:	3 weeks
2009-06-02 07:35:51 +00:00
Jeff Roberson
f4471727f3 - Use an acquire barrier to increment f_count in fget_unlocked and
remove the volatile cast.  Describe the reason in detail in a comment.

Discussed with:	bde, jhb
2009-06-02 06:55:32 +00:00
Pyun YongHyeon
f08e28cfc6 Add 88E8071, 88E8072 to the supported hardware list. While I'm here
correct description of 88E8070. It's Yukon Extreme and have gigabit
PHY.
2009-06-02 05:13:02 +00:00
Pyun YongHyeon
a56fe1f085 Add Yukon Extreme device ids, 88E8071 and 88E8072.
While I'm here correct description of 88E8070. 88E8070 is Yukon
Extreme and have gigabit PHY.
2009-06-02 05:08:57 +00:00
Pyun YongHyeon
efb74172a5 Add Rx checksum offloading support for Yukon FE+ and Yukon Extreme.
These controllers use newer descriptor format and the new descriptor
format uses status LE to indicate the status of checksum. Rx
checksummed value used in previous controllers were very cryptic
and I failed to understand how to use them. In addition most
controllers in previous generations had Rx checksum offloading bug.

While I'm here introduce a MSK_FLAG_NORX_CSUM flag to bypass
checking Rx checksum offloading as Yukon FE+ A0 has status LE bug.
2009-06-02 04:59:29 +00:00
Joseph Koshy
a2c0b3aead Catch up with the times: "mozilla" -> "firefox". 2009-06-02 04:45:56 +00:00
Pyun YongHyeon
ebb25bfab5 Add frame parser capability of Yukon FE+ and Yukon Extreme. With
this feature hardware automatically computes TCP/UDP payload
offset. Introduce MSK_FLAG_AUTOTX_CSUM to mark the capability.
Yukon Extreme B0 revision is known to have a silicon for the
feature so disable it. Yukon Extreme B0 still can do Tx checksum
offloading but CPU have to compute TCP/UDP payload offset. To
enable traditional checksum offloading, disable automatic Tx
checksum calculation capability.
Yukon Extreme A0 revision could not use store-and-forward mode for
jumbo frames(silicon bug) so disable Tx checksum offloading for
jumbo frames.

I believe controllers that have MSK_FLAG_AUTOTX_CSUM capability or
new descriptor format do not have Tx checksum offload bug so
disable checksum offloading workaround for for short frames.

Tested by:	jhb, Warren Block ( wblock <> wonkity dot com )
2009-06-02 04:35:44 +00:00
Pyun YongHyeon
daf292270b Add preliminary Yukon Extreme support and register definitions.
Yukon Extreme uses new descriptor format for TSO and has Tx frame
parser which greatly reduces CPU cycles spent in computing TCP/UDP
payload offset calculation in Tx checksum offloading path. The new
descriptor format also removed TCP/UDP payload computation for TSO
which in turn results in better TSO performance. It seems Yukon
Extreme has a lot of new (unknown) features but only basic
offloading is supported at this time. So far there are two known
issues.
 o Sometimes Rx overrun errors happen when pulling data over
   gigabit link. Running over 100Mbps seem to ok.
 o Ethernet hardware address shows all-zeroed value on 88E8070.
   Assigning ethernet address with ifconfig is necessary to make it
   work.
Support for Yukon Extreme is not perfect but it would be better
than having a non-working device. Special thanks to jbh who fixed
several bugs of initial patch.

Tested by:	jhb, Warren Block ( wblock <> wonkity dot com )
2009-06-02 04:00:17 +00:00
Sam Leffler
e1cfcbcb4e Fix monitor mode vaps to work as intended:
o track # bpf taps on monitor mode vaps instead of # monitor mode vaps
o spam monitor mode taps on tx/rx
o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up
o while here print radiotap (and superg) state in show com
2009-06-02 00:33:28 +00:00
Pyun YongHyeon
b95c79e0a1 Program LED registers for 88E1116/88E1149 PHYs. These PHYs are
found on Marvell Yukon Ultra, Marvell Yukon Extreme controllers.
While I'm here explicitly issue 'powerup' command for 88E1149 PHY.

Tested by:	jhb, Warren Block ( wblock <> wonkity dot com )
2009-06-02 00:30:30 +00:00
Pyun YongHyeon
3e6843d1d7 Don't assume page register value is 0 and restore previous page
register after issuing 'powerup'.
2009-06-02 00:21:30 +00:00
Sam Leffler
c3655fa4f2 don't dispatch frames to vap's not running 2009-06-02 00:06:39 +00:00
Sam Leffler
13471c2b32 count packets 2009-06-02 00:04:10 +00:00
Doug Barton
ce62079b6b Add a note about the change to rcorder for pf and ipfw. 2009-06-01 22:47:59 +00:00
Doug Barton
ebe3fd153f Commit the updates to this file for the new BIND options 2009-06-01 22:14:45 +00:00
Doug Barton
536613bc35 Add support for the build options that are currently in the port:
WITH_BIND_IDN
	WITH_BIND_LARGE_FILE
	WITH_BIND_SIGCHASE
	WITH_BIND_XML
2009-06-01 21:58:59 +00:00
Gabor Kovesdan
25dd52cdb1 - Add Hungarian catalog 2009-06-01 21:54:59 +00:00
John Baldwin
e090d0b63f Remove another d_thread_t use that crept in. 2009-06-01 21:54:22 +00:00
Alexander Motin
aa87dacb51 MFp4.
Log supported AHCI controller capabilities.
2009-06-01 21:42:26 +00:00
John Baldwin
64345f0b57 Add an extension to the character device interface that allows character
device drivers to use arbitrary VM objects to satisfy individual mmap()
requests.
- A new d_mmap_single(cdev, &foff, objsize, &object, prot) callback is
  added to cdevsw.  This function is called for each mmap() request.
  If it returns ENODEV, then the mmap() request will fall back to using
  the device's device pager object and d_mmap().  Otherwise, the method
  can return a VM object to satisfy this entire mmap() request via
  *object.  It can also modify the starting offset into this object via
  *foff.  This allows device drivers to use the file offset as a cookie
  to identify specific VM objects.
- vm_mmap_vnode() has been changed to call vm_mmap_cdev() directly when
  mapping V_CHR vnodes.  This avoids duplicating all the cdev mmap
  handling code and simplifies some of vm_mmap_vnode().
- D_VERSION has been bumped to D_VERSION_02.  Older device drivers
  using D_VERSION_01 are still supported.

MFC after:	1 month
2009-06-01 21:32:52 +00:00
Marko Zec
d825c7936c V_loif is not an array but a pure pointer, so treat it as such.
Reviewed by:	bz
Approved by:	julian (mentor)
2009-06-01 21:29:54 +00:00
Jilles Tjoelker
75cf69394b Fix segfault when giving invalid long option to pkg_info.
PR:		bin/133473
Submitted by:	Rafal Grodzinski
Approved by:	ed (mentor)
MFC after:	1 week
2009-06-01 21:26:52 +00:00
John Baldwin
74fb0ba732 Rework socket upcalls to close some races with setup/teardown of upcalls.
- Each socket upcall is now invoked with the appropriate socket buffer
  locked.  It is not permissible to call soisconnected() with this lock
  held; however, so socket upcalls now return an integer value.  The two
  possible values are SU_OK and SU_ISCONNECTED.  If an upcall returns
  SU_ISCONNECTED, then the soisconnected() will be invoked on the
  socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls.  The
  API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
  the receive socket buffer automatically.  Note that a SO_SND upcall
  should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
  instead of calling soisconnected() directly.  They also no longer need
  to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
  state machine, but other accept filters no longer have any explicit
  knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
  while invoking soreceive() as a temporary band-aid.  The plan for
  the future is to add a new flag to allow soreceive() to be called with
  the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
  buffer locked.  Previously sowakeup() would drop the socket buffer
  lock only to call aio_swake() which immediately re-acquired the socket
  buffer lock for the duration of the function call.

Discussed with:	rwatson, rmacklem
2009-06-01 21:17:03 +00:00
Marko Zec
b2bc853659 Update VNET base pointer setting macro to use a correct source of
vnet context.

Approved by:	julian (mentor)
2009-06-01 21:10:23 +00:00
Xin LI
5bb0de0503 Initialize the match structure. This is unnecessary but gcc insists to
complain about it when we raise the WARNS level.
2009-06-01 21:07:54 +00:00