it at boot time closer to the way we want it to be in the final version.
* Move the default directory to /var/db/entropy
* Run the entropy saving cron job every 11 minutes. This seems
to be a better default, although still bikeshed material.
* Feed /dev/random some cheesy "entropy" from various commands
and files before the disks are mounted. This gives /dev/random
a better chance of running without blocking early.
* Move the reseeding with previously stored entropy to the point
immediately after the disks are mounted.
* Make the harvesting script a little safer in regards to the
possibility of accidentally overwriting something other
than a regular file.
it can be used to reseed at boot time. This will greatly increase
the chances that there will be sufficient entropy available at
boot time to prevent long delays.
For /etc/rc, remove the vmstat and iostat runs from the attempt
to provide some cheesy randomness if the files fail, since
those programs are dynamically linked, and ldd seems to want
some randomness to do its magic.
Guidance and parameters for this project were provided by
Mark Murray, based on the requirements of the Yarrow
algorithm. Some helpful suggestions for implementation
(including the tip about iostat and vmstat) were provided
by Sheldon Hearn. All blame for problems or mistakes is
mine of course.
bind distribution, but until now was not being built as a separate
entity. For documentation, see these man pages:
assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3).
Reviewed by: jdp
of perl man pages and site_perl directories for alpha and i386 in /usr/local,
and share/aclocal and share/doc/ja in /usr/local and /usr/X11R6.
Reviewed by: the ports list
Approved by: steve (alpha part)
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
This should be merged into RELENG_3 and a similar patch may be needed
for RELENG_2_2, should that deemed necessary.
Make world succeeded with these patches in my tree.
Submitted by: "Kaleb S. KEITHLEY" <kaleb@ics.com>
Adjust rc.conf to run named in sandbox, adjust mtree to add /etc/namedb/s
subdirectory (user bind, group bind) to hold secondaries, adjust
comments in named.conf to reflect new secondary scheme. (Note that
core read-only zone files are left owned by root, increasing security even
more).
header files go. I am not too happy about the name. But if we are
to have any hope of being able to use 3rd party PAM modules, we'll
have to live with it.
committed a fix for in 2 days and 3 different people have forgotten
to update this file. GRRR! What's it going to take, electrodes to
the sensitive bits, people?? :-)
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
a port so there is nothing to be done on that side now.
Approved by: jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700
>decision is, I'll respect it.
Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.
-DG
David Greenman
Core-team/Principal Architect, The FreeBSD Project
I hope some other people might find them useful. They are for
zh_CN.EUC (GB) only. I'm not familiar with the BIG5 encoding,
so I could only hope someone else would fill the gap.
PR: 7310
Submitted by: Luoqi Chen <luoqi@chen.ml.org>
hard coded into too many things), it's not nice to go and change /home/src
etc. This means they will be created if missing (so it shouldn't break
the releases), but won't touch them once they are changed.
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
