Previously, such errors were not distinguished from the end-of-directory
condition.
With improvements from Mahmoud Abumandour <ma.mandourr@gmail.com>.
Reviewed by: markj
PR: 262038
MFC after: 2 weeks
This is akin to commit bafaa70b6f9098d83d074968c8e6747ecec1e118.
Reported by: Guy Yur <guyyur@gmail.com>
Fixes: 86a16ada1ea6
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Turns out clang converts "memcmp(foo, bar, len) == 0" and similar to
bcmp calls.
Reviewed by: emaste (previous version), jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D34673
To support cc -pg on arm64 we need to implement .mcount. As clang and
gcc think it is function like it just needs to load the arguments
to _mcount and call it.
On gcc the first argument is passed in x0, however this is missing on
clang so we need to load it from the stack. As it's the caller return
address this will be at a known location.
PR: 262709
Reviewed by: emaste (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34634
Preferably bcmp would just alias memcmp but there is build magic which
makes this problematic.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28846
__sfvwrite() advances the pointer before calling fflush. If fflush()
fails, it is not enough to roll back inside it, because we cannot know
how much was advanced by the caller.
Reported by: Peter <pmc@citylink.dinoex.sub.org>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Fixes: 86a16ada1ea608408cec370171d9f59353e97c77
time() is now implemented using clock_gettime(2) instead of
gettimeofday(2).
Reviewed by: debdrup
Fixes: 358ed16f7505 Use clock_gettime(CLOCK_SECOND)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34438
During distributeworld we call distribute on subdirectories, which in
turn calls installconfig. However, this recursive installconfig call
appends the distribution name (in these cases, "base") to DESTDIR. For
install(1) this works fine as its -D argument comes from the top-level
Makefile.inc1, which passes the original DESTDIR, thereby resulting in
the METALOG entry having the distribution name as a prefix representing
its true installed path relative to the root, but for the hand-rolled
entries they do not use install(1) and thus do not have access to what
the original DESTDIR was, resulting in the METALOG missing this prefix.
Thus, pass down the name of the distribution via a new variable DISTBASE
(chosen as Makefile.inc1 already uses that to convey this exact same
information to etc's distrib-dirs during distributeworld) and prepend
this to the handful of manually-generated METALOG entries. For the
installworld case this variable will be empty and so this behaves as
before.
Note that we need to be careful to avoid double slashes in the METALOG;
distributeworld uses find | awk to split the single METALOG up into
multiple dist.meta files, and this relies on the paths in the METALOG
having the exact prefix ./dist (or ./dist/usr/lib/debug).
Reviewed by: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D33997
Require the newly opened file descriptor to be good, instead of
re-requiring the one that was required three lines earlier.
Thankfully, opening /dev/null is really unlikely to fail.
Reported by: Coverity
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Summary:
Use initial-exec, like other architectures.
While here, switch MACHINE_ARCH in lib/libc/Makefile to LIBC_ARCH and consistently use powerpc.
Subscribers: imp, #contributor_reviews_base
Differential Revision: https://reviews.freebsd.org/D34315
Reviewed by: luporl
MFC after: 2 weeks
The optimization of sysctlbyname() in commit d05b53e0baee7 had the
side-effect of not going through the fix-up for the user.* variables
in the previously called sysctl() function.
This lead to 0 or an empty strings being returned by sysctlbyname()
for all user.* variables.
An alternate implementation would store the user variables in the
kernel during system start-up. That would allow to remove the fix-up
code in the C library that is currently required to provide the actual
values.
This update restores the previous code path for the user.* variables
and keeps the performance optimization intact for all other variables.
Approved by: mjg
Reviewed by: kaktus
Differential Revision: https://reviews.freebsd.org/D34171
Testing had revealed that trying to retrieve the user.localbase
variable into to small a buffer would return the correct error code,
but would not fill the available buffer space with a partial result.
A partial result is of no use, but this is still a violation of the
documented behavior, which has been fixed in the previous commit to
this function.
I just checked the code for "user.cs_path" and found that it had the
same issue.
Instead of fixing the logic for each user.* sysctl string variable
individually, this commit adds a helper function set_user_str() that
implements the semantics specified in the sysctl() man page.
It is currently only used for "user.cs_path" and "user.localbase",
but it will offer a significant simplification when further such
variables will be added (as I intend to do).
MFC after: 3 days
Testing of a new feature revealed that calling sysctl() to retrieve
the value of the user.localbase variable passing too low a buffer size
could leave the result buffer unchanged.
The behavior in the normal case of a sufficiently large buffer was
correct.
All known callers pass a sufficiently large buffer and have thus not
been affected by this issue. If a non-default value had been assigned
to this variable, the result was as documented, too.
Fix the function to fill the buffer with a partial result, if the
passed in buffer size is too low to hold the full result.
MFC after: 3 days
This test was written because execvp was found to improperly handle the
argc == 0 case when it falls back from an ENOEXEC. We could probably
mostly revert it now, but let's just fix the test for the time being and
circle back later to decide if we want to simplify execvp. The test
will likely remain either way just to make sure execvp isn't working
around the newly enforced restriction with the fallback.
Fixes: 301cb491ea41 ("execvp: fix up the ENOEXEC fallback")
Reported by: jenkins via lwhsu@
This adds the PT_GETREGSET and PT_SETREGSET ptrace types. These can be
used to access all the registers from a specified core dump note type.
The NT_PRSTATUS and NT_FPREGSET notes are initially supported. Other
machine-dependant types are expected to be added in the future.
The ptrace addr points to a struct iovec pointing at memory to hold the
registers along with its length. On success the length in the iovec is
updated to tell userspace the actual length the kernel wrote or, if the
base address is NULL, the length the kernel would have written.
Because the data field is an int the arguments are backwards when
compared to the Linux PTRACE_GETREGSET call.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19831
The manpage has contained the following verbiage on the matter for just
under 31 years:
"At least one argument must be present in the array"
Previous to this version, it had been prefaced with the weakening phrase
"By convention."
Carry through and document it the rest of the way. Allowing argc == 0
has been a source of security issues in the past, and it's hard to
imagine a valid use-case for allowing it. Toss back EINVAL if we ended
up not copying in any args for *execve().
The manpage change can be considered "Obtained from: OpenBSD"
Reviewed by: emaste, kib, markj (all previous version)
Differential Revision: https://reviews.freebsd.org/D34045
otherwise the data is just dropped. Check for current position equal to
the buffer base at the entry of the function; if not equal, setvbuf()
was done from the write method and it is not our business to override
the decision.
PR: 76398
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34007
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33988
The text after .error et al is emitted verbatim.
Reviewed by: sjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33904
A case of undefined behavior in __fread() has been detected by UBSAN
and reported by Mark Millard:
/usr/main-src/lib/libc/stdio/fread.c:133:10: runtime error: applying
zero offset to null pointer
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior in
/usr/main-src/lib/libc/stdio/fread.c:133:10
While being benign (the NULL pointer is later passed to memcpy() with
a length argument of 0), this issue causes in the order of 600 Kyua
test cases to fail on systems running a world built with WITH_UBSAN
and WITH_ASAN.
The undefined behavior can be prevented by skipping operations that
have no effect for r == 0. Mark Millard has suggested to only skip
this code segment if fp->_p == NULL, but I have verified that for the
case of r == 0 no further argument checking is performed on the
addresses passed to memcpy() and thus no bugs are hidden from the
sanitizers due to the simpler condition chosen.
Reported by: Mark Millard (marklmi@yahoo.com)
Tested by: Mark Millard (marklmi@yahoo.com)
Differential Revision: https://reviews.freebsd.org/D33903
MFC after: 2 weeks
Mark Milliard has detected a case of undefined behavior with the LLVM
UBSAN. The mandoc program called qsort with a==NULL and n==0, which is
allowed by the POSIX standard. The qsort() in FreeBSD did not attempt
to perform any accesses using the passed pointer for n==0, but it did
add an offset to the pointer value, which is undefined behavior in
case of a NULL pointer. This operation has no adverse effects on any
achitecture supported by FreeBSD, but could be caught in more strict
environments.
After some discussion in the freebsd-current mail list, it was
concluded that the case of a==NULL and n!=0 should still be caught by
UBSAN (or cause a program abort due to an illegal access) in order to
not hide errors in programs incorrectly invoking qsort().
Only the the case of a==NULL and n==0 should be fixed to not perform
the undefined operation on a NULL pointer.
This commit makes qsort() exit before reaching the point of
potentially undefined behvior for the case n==0, but does not test
the value of a, since the result will not depend on whether this
pointer is NULL or an actual pointer to an array if n==0.
The issue found by Mark Milliard in the whatis command has been
reported to the upstream (OpenBSD) and has already been patched
there.
MFC after: 1 week
Otherwise on mapper failure we goto error handler which expect
rpscoc_lock owned, but we do not.
PR: 261051
Reported by: RyanCai <ryancaicse@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
in handling the cpuset sizes different from sizeof(cpuset_t).
For both cases, cpuset size shorter than sizeof(cpuset_t) results
in EINVAL on Linux.
For sched_getaffinity(), be more permissive and accept cpuset size
larger than our cpuset_t, by clipping the syscall argument and zeroing
the rest of the output buffer. For sched_setaffinity(), we should allow
shorter cpusets than current ABI size, again zeroing the rest of the bits.
With this change, python os.sched_get/setaffinity functions work.
Reported by: se
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
