X700 family of controllers has limited number of available VLAN
HW filters. Driver did not handle properly a case when user
assigned more VLANs to the interface which had all filters
already in use. Fix that by disabling HW filtering when
it is impossible to create filters for all requested VLANs.
Keep track of registered VLANs using bitstring to be able
to re-enable HW filtering when number of requested VLANs
drops below the limit.
Also switch all allocations to use M_IXL malloc type
to ease detecting memory leaks in the driver.
Reviewed by: erj
Tested by: gowtham.kumar.ks@intel.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28137
Add endiannes conversions in order to support big-endian platforms
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
- limit maximum segment size to 2048 bytes. Although dwmmc supports a buffer
fragment with a maximum length of 4095 bytes, use the nearest lower power
of two as the maximum fragment size. Otherwise, busdma create excessive
buffer fragments.
- fix off by one error in computation of the maximum data transfer length.
- in addition, reserve two DMA descriptors that can be used by busdma
bouncing. The beginning or end of the buffer can be misaligned.
- Don’t ignore errors passed to bus_dmamap_load() callback function.
- In theory, a DMA engine may be running at time when next dma descriptor is
constructed. Create a full DMA descriptor before OWN bit is set.
MFC after: 2 weeks
This fixes an issue where a private key contained bits that should
have been cleared by the clamping process, but were passed through
to the scalar multiplication routine and resulted in an invalid
public key.
Issue diagnosed (and an initial fix proposed) by shamaz.mazum in
PR 252894.
This fix suggested by Jason Donenfeld.
PR: 252894
Reported by: shamaz.mazum
Reviewed by: dch
MFC after: 3 days
DataSN for solicited Data-Out is per-R2T. Since we handle whole R2T
in one go, we don't need to store it anywhere, especially in global
per-command structure. This may allow us to handle multiple R2T per
command at once, if we decide, or may be relax locking.
Rename the second use of that field to io_referenced_task_tag.
MFC after: 1 month
As we get started with no memory allocator, we set up static font data
for font passed by loader (if there is any). At this time, we also must
set refcount 1, and refcount will get incremented in cnprobe() callback.
At some point the memory allocator will be available, and we will set up
properly allocated font data, but we should not disturb the refcount.
PR: 253147
Memory and PCI resources are freed with no particular order. This could
cause use-after-frees when detaching following a failed attach. For
instance, iflib_tx_structures_free() frees ctx->ifc_txqs[] but
iflib_tqg_detach() attempts to access this array. Similarly, adapter
queues gets freed by IFDI_QUEUES_FREE() but IFDI_DETACH() attempts to
access adapter queues to free PCI resources.
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D27634
- The behavior implemented in r362905 resulted in delayed transmission
of packets in some cases, causing performance issues. Use a different
heuristic to predict tx requests.
- Add a tunable/sysctl (hw.cxgbe.tx_coalesce) to disable tx coalescing
entirely. It can be changed at any time. There is no change in
default behavior.
Investigation of iSCSI target data corruption reports brought me to
discovery that cxgb(4) expects mbufs to be physically contiguous, that
is not true after I've started using m_extaddref() in software iSCSI
for large zero-copy transmissions. In case of fragmented memory the
driver transmitted garbage from pages following the first one due to
simple use of pmap_kextract() for the first pointer instead of proper
bus_dmamap_load_mbuf_sg(). Seems like it was done as some optimization
many years ago, and at very least it is wrong in a world of IOMMUs.
This patch just removes that optimization, plus limits packet coalescing
for mbufs crossing page boundary, also depending on assumption of one
segment per packet.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Reviewed by: mmacy, np
Differential revision: https://reviews.freebsd.org/D28428
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
newer controller have a sparce bus space that can be figured
out by probing the HW. This gives the starting bus number.
When reading the PCI config. space behind the VMD controller,
the offset of the starting bus needs to be subtracted from
the bus being read.
Fixed a bug in which in which not all of the devices
directly attached to the VMD controller would be probed.
On my initial test HW, a switch was found at bus 0, slot 0
and function 0. All of the NVME drives were behind that
switch. Now scan for all slots and functions attached to
bus 0. If a something was found then run attach after the
scan. On detach also go through all slots and functions
on bus 0.
Tested with device ID's: 0x201d & 0x9a0b
Tested by: nc@
MFC after: 7 days
PR: 252253
Move software iSCSI tunables/sysctls into kern.icl.soft subtree.
Replace several hardcoded length constants there with variables.
While there, stretch the limits to better match Linux' open-iscsi
and our own initiator with new MAXPHYS of 1MB. Our CTL target is
also optimized for up to 1MB I/Os, so there is also a match now.
For Windows 10 and VMware 6.7 initiators at default settings it
should make no change, since previous limits were sufficient there.
Tests of QD1 1MB writes from FreeBSD over 10GigE link show throughput
increase by 29% on idle connection and 132% with concurrent QD8 reads.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
This is a regression issue after the new UAR API was introduced
by f8f5b459d2 .
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
It's rather confusing when adapter->hw and hw are mixed and matched
within a particular function.
Some of this was missed in cd1cf2fc1d
and r353778 respectively.
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
RFC 7143 (11.2.1.8):
An ITT value of 0xffffffff is reserved and MUST NOT be assigned for a
task by the initiator. The only instance in which it may be seen on
the wire is in a target-initiated NOP-In PDU (Section 11.19) and in
the initiator response to that PDU, if necessary.
MFC after: 1 month
This reverts commit aa37baf3d7.
The reverted commit was motivated by a problem observed on stable/12,
but it turns out that a better solution was committed in r348309 but not
MFCed. So, revert this change since it is unnecessary and not really
correct: it assumes that the order in which module metadata records is
defined determines their order in the output linker set. While this
seems to hold in my testing, it is not guaranteed.
Reported by: cem
Discussed with: imp
MFC after: 3 days
By default, axgbe driver does a receiver reset after predefined number
of retries for the link to come up. However, this receiver reset
doesn't always suffice, due to an hardware issue.
In that case, as a workaround, a complete phy reset is necessary.
This patch introduces a sysctl that can be set to 1 to let the driver
reset the phy completely, rather than just doing receiver reset.
The workaround will be removed once the issue is fixed by means
of firmware update.
This patch also fixes the handling of the direct attach cables
properly.
Submitted by: rajesh1.kumar_amd.com
Differential Revision: https://reviews.freebsd.org/D28266
Handle the case of a tagged command arriving when there's an untagged
one still outstanding gracefully instead of panicing.
While at it:
- Replace fancy arithmetics with a simple assignment as busy_itl can
only ever be either 0 or 1.
- Fix a comment typo in sym_free_ccb().
- In ___dma_getp(), remove dead code. [1]
- In sym_sir_bad_scsi_status(), add missing FALLTHROUGH. [2]
While at it:
- For getbaddrcb(), remove __unused from the nseg argument as it's in
fact used when compiling with INVARIANTS.
- In sym_int_sir(), ensure in all branches that cp is not NULL before
using it.
Reported by: Coverity
CID: 1008861 [1], 114996 [2]
PNP info definitions currently have an unfortunate requirement in that
they must follow the associated module definition in the module metadata
linker set. Otherwise devmatch can segfault while processing the linker
hints file since kldxref maintains the order in the linker set.
A number of drivers violate this requirement. In some cases this can
cause devmatch(8) to segfault when processing the linker hints file.
Work around the problem for now simply by adjusting the drivers.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28260
For hardware offload solicited data may potentially be handled more
efficiently than unsolicited due to direct data placement. Or there
can be some unsolicited write buffering limitations. It may create
situations where FirstBurstLength limit is really useful.
Software driver though has no those factors, having to do memcopy()
any way and having no so hard limit on the temporary storage. Same
time more active use of unsolicited transfers allows to avoid some
of Ready To Transfer (R2T) PDU round-trip times and processing.
This change effectively doubles from 64KB to 128KB the maximum size
of write command that can be transferred within one link RTT. Tests
of (64KB, 128KB] QD1 writes mixed with simultaneous QD8 reads over
the same connection, increasing RTT, shows almost double write speed
and half latency, while we should be able to afford few megabytes of
RAM for additional buffering on a target these days.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This was blindly moved in r360722 but the variable being printed is not
yet initialised. It's of little use and can easily be added back in the
right place if needed by someone debugging, so just delete it.
Reported by: bryanv
Rather than have every device register itself for both virtio_pci and
virtio_mmio, provide a VIRTIO_DRIVER_MODULE wrapper to declare both,
merge VIRTIO_SIMPLE_PNPTABLE with VIRTIO_SIMPLE_PNPINFO and make the
latter register for both buses. This also has the benefit of abstracting
away the available transports and their names.
Reviewed by: bryanv
Differential Revision: https://reviews.freebsd.org/D28073
We must check MagicValue not just Version before anything else, and then
we must check DeviceID and immediately abort if zero (and this must not
be an error).
Do all this when probing rather than at the start of attaching as that's
where this belongs, and provides a clear boundary between the device
detection and device initialisation parts of the specified driver
initialisation process. This also means we don't create empty device
instances for placeholder devices, reducing clutter on systems that
pre-allocate a large number, such as QEMU's AArch64 virt machine (which
provides 32).
Reviewed by: bryanv
Differential Revision: https://reviews.freebsd.org/D28070
Define the maximum numbers of segments to allow for non-page alignment
at the beginning and end of a maxphys size transfer. Also set
ccb_pathinq.maxio consistent with maxphys.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28043
on success instead of 0 to match Linux.
Imprivata binary depends on this.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
Differential revision: https://reviews.freebsd.org/D28218
Many I2C "compatibility" mouse devices found on touchpads continue to
return last report data in sampling mode after touch has been ended.
That results in cursor drift. Filter out such a reports with comparing
content of current report with content of previous one.
Reported by: many
Tested by: omatsuda, gllb (github.com)
Obtained from: sysutils/iichid
There is a report that reading of surface/button switch feature report
causes SYN1B7D touchpad malfunction. As specs does not require it to
be readable assume that report usages have default value on attach and
last written value during operation. Do not apply default usage values
on attachment and resume.
While here fix manpage typos and add avg@ to copyright header.
Reported by: Jakob Alvermark <jakob_AT_alvermark_DOT_net>
Reviewed by: avg
Differential revision: https://reviews.freebsd.org/D28196
This patch is a quick hack to change the internal Ethertype used
within the chip. All frames with this type are dropped silently.
This patch allows you to overwrite the factory default 0x88a8, which
is used by IEEE 802.1ad VLAN stacking.
Reviewed by: kp, philip, brueffer
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24179
Try to standardize how drivers negotiate feature and the
function names
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27930
- Add and fix a few error path counters
- Improve sysctl descriptions
- Use flags consistently to determine IPv4 vs IPv6
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27926
