Commit Graph

63 Commits

Author SHA1 Message Date
Warner Losh
7e2ff8bbff Cope gracefully with device_get_children returning an error.
Obtained from: Hans Petter Selasky
P4: http://perforce.freebsd.org/chv.cgi?CH=112957
2007-01-19 08:49:28 +00:00
Warner Losh
a63eba960f When we can't parse the CIS, note with a warning that the bogus CIS
was ignored, rather than freaking out.  In the past, it wasn't possible
to not parse the CIS, so this changes no behavior.
2006-06-12 03:17:24 +00:00
John Baldwin
5aa58b3e8f Make the 'pci_devclass' pointer variable private (drivers really shouldn't
share devclass pointers, a mistake I've encouraged in the past) and
move the declaration of the pci_driver kobj class from cardbus.c to
pci_private.h so that other drivers can inherit from pci_driver.
2006-01-20 22:00:50 +00:00
Warner Losh
388395ccaa Remove now-obsolete printf warning. 2005-12-30 19:38:47 +00:00
Warner Losh
ef5cc9accd Move all of the resource allocation into the pci layer. The resource
allocation here just duplicated it (badly).
2005-12-30 19:25:04 +00:00
Gleb Smirnoff
6afb2250fb - Retire BARBIT in favor of new PCI_RID2BAR.
- Fix build.
2005-12-30 11:31:47 +00:00
Gleb Smirnoff
408b85a1e2 Help Warner with merge from p4. 2005-12-29 10:38:42 +00:00
Warner Losh
47147ce799 Implement /dev/cardbus%d.cis, same thing as /dev/pccard%d.cis. There
are some rough edges with this still, but it seems to work well enough
to commit.
2005-12-29 01:43:47 +00:00
Gleb Smirnoff
086745614c When in rev. 1.47 cardbus_alloc_resources() function was moved from
cardbus_cis.c to this file, some code was not merged and thus resource
list entries were invalid. They didn't have a resources attached to
them.
  However, the problem was masked for some time later, because newer
resources list entries were added to the head of the list, and
resource_list_find() always returned the first matching resource list
entry. Usually the underlying driver allocated a valid resource and
added it to the head of the list, and invalid one wasn't used.
  In rev. 1.174 of subr_bus.c the sorting of resource list entries was
reversed demasking the problem in cardbus_alloc_resources().
  This commit fixes the problem returning back some code from
cardbus_cis.c, pre-1.49 revisions.

PR:			kern/87114
PR:			kern/90441
Hardware provided by:	Vasily Olekhov <olekhov yandex.ru>
Reviewed by:		imp
2005-12-28 10:15:01 +00:00
Warner Losh
6811d2bc72 Cardbus has only 1 slot, so simplify a little. 2005-10-28 06:03:53 +00:00
Ruslan Ermilov
360d00a0b2 Calling rman_get_start() after bus_release_resource() is evil.
It became fatal after a recent "struct resource" split change.
2005-09-27 13:33:46 +00:00
Warner Losh
36fed96550 Use STAILQ in preference to SLIST for the resources. Insert new resources
last in the list rather than first.

This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x).  This
also means that the pci code will once again print the resources in BAR
ascending order.
2005-03-18 05:19:50 +00:00
Warner Losh
2219bbc553 Doh! silly typo precludes compiling 2005-03-11 05:30:59 +00:00
Warner Losh
0f675788ff Revert changes of 1.49. Lots-a-people broke with it, for reasons
unknown (since my sony vaio didn't :-(.

Instead, fix the problem described by 1.49 in a different way: just
add the two calls I'd hoped I'd avoid in 1.49 by doing the (wrong)
gymnastics there.  While 1.49 is a good direction to go in, each step
of the way should work :-(.
2005-03-11 05:27:05 +00:00
Warner Losh
af5e97c122 There were two calls to cardbus_do_cis when cardbus_do_cis changed,
yet I only changed one of them.  So when we loaded drivers, we'd fail
to allocate resources correct.

This pointed out that we were doing the wrong thing when we failed to
attach a child.  We released all the resources and almost deleted the
child.  Instead, we should keep the resources allocated so when/if a
driver is loaded, we can go w/o having to allocate them.  We use
pci_cfg_save/restore to restore the BARs with these resources.

This seems to fix the problems that we were seeing that I thought
might have magically gone away in the last revision of cardbus.c (but
really didn't).

Noticed by: avatar (nicely done!)
2005-02-28 01:27:24 +00:00
Warner Losh
164b196506 style(9) nit 2005-02-20 20:32:44 +00:00
Warner Losh
440b5ade31 Move resource allocation routines from cardbus_cis.c to cardbus.c.
They have nothing at all to do with CIS parsing.

Remove some unused funce parsing: nothing used the results.

Use more of pccard_cis.h's deifnitions for the cardbus specific cis
parsing we do.  More work is needed in this area.

This reduces the size of the cardbus module by 380 bytes or so...
2005-02-06 21:03:13 +00:00
Warner Losh
2dd5c91ebb Use the standard FreeBSD license
Approved by: imp, jon
2005-01-13 19:12:10 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Warner Losh
5d11e83faa MFp4:
The hack for setting the bus has been moved down into the cbb driver.
I've been running without this hack in my tree for so long I had
forgotten that I'd removed it :-).  Please let me know if this causes
difficulty for your laptop.
2004-06-27 13:07:02 +00:00
Poul-Henning Kamp
41ee9f1c69 Add some missing <sys/module.h> includes which are masked by the
one on death-row in <sys/kernel.h>
2004-05-30 17:57:46 +00:00
Doug Rabson
aec21b56e8 Make the cardbus driver a derived class of the pci driver. In theory, this
should allow many of the pci methods to be re-staticised.
2003-11-01 12:45:03 +00:00
Warner Losh
f6e01094a4 remove the cardbus cis reading code. nobody ever used it and it has
locking issues down to the api level.
2003-10-06 15:56:29 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Thomas Moestl
3920999db7 Add a new PCI interface method, assign_interrupt, to determine the
interrupt to be used for a device. This is intended solely for internal
use of PCI bus implementations, and exists so that PCI bus drivers
implementing special interrupt assignment methods which require
additional work at the bus level to work right can be easily derived
from the generic driver (or any other one) without resorting to hacks.

It will be used in the sparc64 ofw_pcibus driver, which will be
committed shortly.

Make use of this method in the generic implementation, and add it to
the method table of bus drivers derived from the PCI one.

Reviewed by:	imp, -hackers
2003-07-01 14:08:33 +00:00
Warner Losh
51715fe79d Move the resource handling down into the pci bus as well.
Minor CIS resource allocation code cleanup
Remove some fairly useless debug writes.

This finishes the work to move as much cardbus code as possible into
pci.  We wind up removing 800-odd lines from cardbus.c: we go from
1285 to 400 lines.

Reviewed by: mdodd
2003-02-18 21:24:00 +00:00
Warner Losh
5794c59372 Move the pnp and location info into the common pci bus. Make all known
pci busses implement this.

Also minor comment smithing in cardbus.  Fix copyright to this year
with my name on it since I've been doing a lot to this file.

Reviewed by: jhb
2003-02-17 21:20:35 +00:00
Warner Losh
29575b16f5 Kill a now-bogus comment 2003-02-17 19:48:39 +00:00
Warner Losh
50cc4892cb Move call to pci_print_verbose until after all the variables that it
depends on.

Pointy hat to: imp (anybody know if these things are accepted at Eco-Cycle?)
2003-02-17 04:13:44 +00:00
Warner Losh
387ca2cc8a Checkpoint a work in progress:
o Use the common pci_* routines in preference to the copied and hacked
  routines from an ancient pci.c.

This saves 509 lines in cardbus.c.  More savings to follow when I
convert the resource code over.  In the past when I've done this the
resource code conversion breaks cardbus in subtle ways so I'm doing a
1/2 way checkpoint this time.  cardbus still works for me the same as
it did before.

It also looks like cardbus devices now show up as pci bus devices to
pciconf -l, but maybe that was happening before.

Inspired by a patch from Justin Gibbs many moons ago.  When he
finishes his kobj multiple inheritance work, we can transition the
finished version of this work to that fairly easily.
2003-02-16 02:06:50 +00:00
Warner Losh
9476c349dd MFp4:
Second part of the kldload patches for cardbus.  This makes
	kldload of a driver for a device that's inserted now appears
	to work.  To make it work, we only do a power cycle of the card
	if there's no children drivers attached.

	This likely is papering over bogosities in the power system.  The
	power sequence needs to be re-written, so I'll not worry about
	the papering over until the re-write.
2003-02-12 05:57:02 +00:00
Warner Losh
78b389be87 MFp4:
Don't reach inside of rman to r_dev.  Use rman_get_device instead.
2003-02-12 05:54:22 +00:00
Warner Losh
9ca938eb11 Don't turn off the power of cards when new drivers are added
unconditionally.  kldloading a cardbus driver was shooting down other
attached devices because most drivers assume that one cannot
power-cycle cards w/o the driver knowning about it.

Submitted by: simokawa-san
2003-02-11 05:31:35 +00:00
Warner Losh
66e390feb6 MFp4:
u_int*_t -> uint*_t to conform more closely with C99.
2003-01-27 05:47:01 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Warner Losh
3a28284461 Need more parens here.
Approved by: re (blanket)
2002-11-27 17:30:41 +00:00
Warner Losh
fbe9cff112 Implement PCI_IVAR_ETHADDR. Cardbus has the MAC addr in the CIS,
sometimes, so return it when requested and it does.  Also a little
more infrastructure for a few other things.

Submitted by: sam
Approved by: re (blanket for NEWCARD)
2002-11-27 06:56:29 +00:00
Warner Losh
d0c36f94f7 MFp4:
o Add a diagnostic for an 'impossible' condition.
o Collapse common code.
2002-11-14 05:12:02 +00:00
Warner Losh
bcaa6b0541 MFp4:
o Always release the resources on device detach.
o Attach resources the same with driver added as we do we do in the insert
  case (maybe this should be a routine).
o signal the wakeup of the thread on resume instead of trying to force an
  interrupt.
o Minor debug hacks.
o use 0xffffffff instead of -1 for uint32_t items.
o Don't complain when we're asked to detach no cards.  This is normal.
o Eliminate the now worthless second parameter to card_detach_card.
o minor style(9)isms

Some of these patches may be from: iwasaki-san, jhb, iadowse
2002-11-02 23:00:28 +00:00
Warner Losh
aa7bc3b3fc o Add routines to return the location and pnpinfo for this card.
Note, we return the PCI pnp info, but in fact that's wrong to do
  since that data is not defined for CardBus cards.  CardBus says that
  these registers are undefined and one should use the CIS to do
  device matching.  To date, all CardBus cards have had these
  registered defined, no doubt because they are using common silicon
  to produce both the PCI cards and the CardBus cards.  However, it isn't
  any worse than the rest of the system, so just note it in passing and
  move on.
o Also sort prototypes while I'm here.
2002-10-07 23:00:51 +00:00
Andrew R. Reiter
b2c6ac5b2b - Forgot to remove cardattached declaration in revision 1.22. 2002-09-10 16:50:06 +00:00
Warner Losh
17a39a01e9 Remove more bogus reprobe code. I don't think it is needed here either. 2002-09-10 06:37:02 +00:00
Warner Losh
6c596e8d0b pccbb -> cbb 2002-08-15 08:02:23 +00:00
Takanori Watanabe
80f1001813 Make oldcard and newcard kernel module work. 2002-05-30 17:38:00 +00:00
Warner Losh
21677473c6 Revert most of the recent PCI merge. This has proven to be too
unstable for the coming DP1 release.  Instead, I'll develop that on
the IMP_CB_MERGE branch until it is more stable.
2002-03-15 06:41:01 +00:00
Warner Losh
86d1f89423 Cleanup the recent cardbus cleanups. This fixes some of the panics
that I introduced with -v.  However, other problems still remain (including
the loss of interrupts).
2002-03-13 05:38:19 +00:00
Warner Losh
a268f9dbeb Don't use __FBSDID yet. Looks like most (all?) of the rest of the kernel
doesn't do that.
2002-03-07 08:12:40 +00:00
Warner Losh
b3889b6815 Implement hw.cardbus.debug and hw.cardbus.cis_debug to help debug some
of the cardbus problems that people may start seeing.
2002-03-07 08:10:42 +00:00
Warner Losh
7ba175ac23 Use the pci.c code wherever possible, rather than copying all the pci
code into cardbus and s/pci/cardbus.  This exposes a few pci_*
functions that are now static.

This work is similar to work Justin posted to the mobile list about a
year or two ago, which I have neglected since then.

This is a subset of his current work with the multiple inheritance
newbus architecutre.  When completed, that will eliminate the need for
pci/pci_private.h.

Similar work is needed for the cardbus_cis and pccard_cis code as well.
2002-02-27 05:09:14 +00:00
Warner Losh
3799207059 Get rid of the bogus DETACH_NOWARN and don't warn when asked to detach
a card that isn't there unless we're booting verbose.  It serves no
purpose.
2002-02-07 06:43:02 +00:00