when routing interrupts instead of cpu_apic_ids[0] since cpu_apic_ids[]
is only populated for multiple-CPU machines. This also matches what the
code does when SMP is not enabled.
PR: bin/151616
Tested by: "Damian S. Kolodziejczyk" damkol | gmail
Submitted by: avg
MFC after: 1 week
In xbb_detach() only perform cleanup of our taskqueue and
device statistics structures if they have been initialized.
This avoids a panic when xbb_detach() is called on a partially
initialized device instance, due to an early failure in
attach.
Sponsored by: Spectra Logic Corporation
ip and tcp pointers were not reset after some
pullups. In practice this led to an NFS mount
failure when using UDP reported by Kevin Lo,
thanks Kevin. Fix from yongari, thank you!
the dual port BCM5717 and BCM5718 devices which are intended for
mainstream workstation and entry-level server designs and
represents the twelfth generation of NetXtreme Ethernet controllers.
This family is the successor to the BCM5714/BCM5715 family and
supports IPv4/IPv6 checksum offloading, TSO, VLAN hardware tagging,
jumbo frames, MSI/MSIX, IOV, RSS and TSS.
This change set supports all hardware features except IOV and
RSS/TSS. Unlike its predecessors, only extended RX buffer
descriptors can be posted to the jumbo producer ring. Single RX
buffer descriptors for jumbo frame are not supported. RSS requires
a more substantial set of changes and will apply to a larger set
of NetXtreme devices so RSS/TSS multi-queue support will be
implemented in a future releases.
Special thanks to Broadcom who kindly sent a sample board to me
and to davidch who gave provided the initial support code.
Submitted by: davidch (initial version)
HW donated by: Broadcom
physical page mapping should span two or more MTRRs of different types.
Add a pmap function, pmap_demote_DMAP(), by which the MTRR module can
ensure that the direct map region doesn't have such a mapping.
[2] Fix a couple of nearby style errors in amd64_mrset().
[3] Re-enable the use of 1GB page mappings for implementing the direct
map. (See also r197580 and r213897.)
Tested by: kib@ on a Westmere-family processor [3]
MFC after: 3 weeks
delegations are being returned for reasons other than a Recall.
Also, re-organize nfscl_recalldeleg() slightly, so that it leaves
clearing NMODIFIED to the ncl_flush() call and invalidates the
attribute cache after flushing. It is hoped that these changes
might fix the problem others have seen when using the NFSv4
client with delegations enabled, since I can't reliably reproduce
the problem. These changes only affect the client when doing NFSv4
mounts with delegations enabled.
MFC after: 10 days
'hw.acpi.remove_interface'. hw.acpi.install_interface lets you install new
interfaces. Conversely, hw.acpi.remove_interface lets you remove OS
interfaces from the pre-defined list in ACPICA. For example,
hw.acpi.install_interface="FreeBSD"
lets _OSI("FreeBSD") method to return 0xffffffff (or success) and
hw.acpi.remove_interface="Windows 2009"
lets _OSI("Windows 2009") method to return zero (or failure). Both are
comma-separated lists and leading white spaces are ignored. For example,
the following examples are valid:
hw.acpi.install_interface="Linux, FreeBSD"
hw.acpi.remove_interface="Windows 2006, Windows 2006.1"
OpenSolaris onnv-revision: 10209:91f47f0e7728
6830541 zfs_get_data_trips on a verify
6696242 multiple zfs_fillpage() zfs: accessing past end of object panics
6785914 zfs fails to drop dn_struct_rwlock in recovery code path
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6830541, 6696242, 6785914)
MFC after: 2 weeks
- Chasin down bogus watchdogs has led to an improved
design to this handling, the hang decision takes
place in the tx cleanup, with only a simple report
check in local_timer. Our tests have shown no false
watchdogs with this code.
- VLAN fixes from jhb, the shadow vfta should be per
interface, but as global it was not. Thanks John.
- Bug fixes in the support for new PCH2 hardware.
- Thanks for all the help and feedback on the driver,
changes to lem with be coming shortly as well.
autotuned. It is only an upper bound (the memory is not always allocated)
and the system contains a vm_lowmem handler so nothing will crash and burn
if it's tuned too high.
Reviewed by: mckusick
introduce function pointers once set up to the respective implementation
for reading the (S)TICK and writing the (S)STICK_COMPARE registers as a
compromise between duplicating code and selecting between different
implementations during execution over and over again, similar to what is
done elsewhere in the MD in order to support different CPU models that
won't ever change at runtime.
- In the remaining tick interrupt handler further push down disabling of
interrupts to the periodic case as it isn't necessary here in one-shot
mode at all.
This was needed for recover implementation.
Implement the recover command for GPT. Now GPT will marked as
corrupt when any of three types of corruption will be detected:
1. Damaged primary GPT header or table
2. Damaged secondary GPT header or table
3. Secondary header is not located in the last LBA
Marked GPT becomes read-only. Any changes with corrupt table
are prohibited. Only "destroy" and "recover" commands are allowed.
Discussed with: geom@ (mostly silence)
Tested by: Ilya A. Arhipov
Approved by: mav (mentor)
MFC after: 2 weeks
within the first 4 bytes of the EHCI memory space. For controllers that
use big-endian MMIO, reading them with 1- and 2-byte reads would then
return the wrong values. Instead, read the combined register with a 4-byte
read and mask out the interesting quantities.
enhancements (1). Switch to a standard 2-clause BSD license for this (2).
Unfortunately we have to un-static the ifindex_table for this but do not
publicly export it.
Suggested by: rwatson (1) a while back.
Approved by: thompsa (2) for the change from r204279.
MFC after: 6 days
VLAN hardware tagging to make TSO work over VLAN. So if VLAN
hardware tagging is disabled explicitly clear TSO over VLAN. While
I'm here allow disabling VLAN TX checksum offloading.
Tested by: Liudas < liudasb <> centras dot lt >
MFC after: 10 days
existing code caused problems with some SCSI controllers.
A new sysctl kern.cam.ada.spindown_shutdown has been added that controls
whether or not to spin-down disks when shutting down.
Spinning down the disks unloads/parks the heads - this is
much better than removing power when the disk is still
spinning because otherwise an Emergency Unload occurs which may cause damage
to the actuator.
PR: kern/140752
Submitted by: olli
Reviewed by: arundel
Discussed with: mav
MFC after: 2 weeks
converted to use the mii_phy_add_media()/mii_phy_setmedia() pair instead
of mii_add_media()/mii_anar() remove the latter.
- Declare mii_media mii_media_table static as it shouldn't be used outside
of mii_physubr.c.
MFC after: never
interface also has such connectors.
- In tl_attach() unify three different ways of obtaining the device and
vendor IDs and remove the now obsolete tl_dinfo from tl_softc.
- Given that tlphy(4) only handles the integrated PHYs of NICs driven by
tl(4) make it only probe on the latter.
- Switch mlphy(4) and tlphy(4) to use mii_phy_add_media()/mii_phy_setmedia().
- Simplify looking for the respective companion PHY in mlphy(4) and tlphy(4)
by ignoring the native one by just comparing the device_t's directly rather
than the device name.
- Use mii_phy_add_media() instead of mii_add_media(). I'm not sure how
this driver actually managed to work before as mii_add_media() is
intended to be used to gether with mii_anar() while mii_phy_add_media()
is intended to be used with mii_phy_setmedia(), however this driver
mii_add_media() along with mii_phy_setmedia().
to use the generic hash32_buf() function. Although adding the
bytes seemed sufficient for UFS and ZFS, since most of the bytes
are the same for file handles on the same volume, this might not
be sufficient for other file systems. Use of a generic function
also seems preferable to one specific to NFSv4.
Suggested by: gleb.kurtsou at gmail.com
MFC after: 10 days
to BCM6906 A0/A2. This should fix a long standing BCM5906 A2 lockup
issues. Data sheet explicitly mentions BCM5906 A0, A1 and A2 use
de-pipelined mode on these revisions.
Special thanks to Buganini who tried all combinations of
experimental patches for more than 10 days.
Tested by: Buganini <buganini <> gmail dot com >
legacy and IPv6 route destination address.
Previously in case of IPv6, there was a memory overwrite due to not enough
space for the IPv6 address.
PR: kern/122565
MFC After: 2 weeks
the association notification), the included information though always
contains an elem block with an odd number of bytes. We handle the last
byte as if it might contain a whole elem block, this of course is not
true as one byte is not enough to hold a block, we therefore discard the
complete frame. The solution here is to subtract one from the actual
notification length, this is also what the Linux driver does. With this
change the frames ends exactly where the last elem block ends.
This commit also reverts r214160 which is no longer required and now even
wrong.
MFC after: 1 week
information that device is already suspended or that device is using
one-time key and suspend is not supported.
- 'geli suspend -a' silently skips devices that use one-time key, this is fine,
but because we log which device were suspended on the console, log also which
devices were skipped.
