This is in sync with what is defined for Linux 5.8. Note that all bits
in HWCAP are exhausted, and HWCAP2 has been added.
This also revealed an error in some of the existing definitions. We are
missing HWCAP_ASIMDHP, and as a result a portion of the HWCAP values are
shifted right by one bit. This will be fixed in an upcoming change, but
the values being added now are compatible with what Linux defines.
Reviewed by: emaste, markj, manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26030
We don't need these pagetables after the early boot. Remove the chance we
write to memory we didn't expect to and remove architectural undefined
behaviour.
Reviewed by: alc (earlier version), mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D22606
Currently we use a single bit to indicate whether the virtual page is
part of a superpage. To support a forthcoming implementation of
non-transparent 1GB superpages, it is useful to provide more detailed
information about large page sizes.
The change converts MINCORE_SUPER into a mask for MINCORE_PSIND(psind)
values, indicating a mapping of size psind, where psind is an index into
the pagesizes array returned by getpagesizes(3), which in turn comes
from the hw.pagesizes sysctl. MINCORE_PSIND(1) is equal to the old
value of MINCORE_SUPER.
For now, two bits are used to record the page size, permitting values
of MAXPAGESIZES up to 4.
Reviewed by: alc, kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26238
This allows privileged userspace processes to find information about the
physical page backing a given mapping. It is useful in applications
such as DPDK which perform some of their own memory management.
Reviewed by: kib, jhb (previous version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D26237
This whitespace was intentionally added to help differentiate the different
register groups within this file.
While here add missing whitespace from earlier in the file,
Sponsored by: Innovate UK
When enabling the MMU on arm64 we need to ensure the tlb invalidation has
completed before setting the enable bit in the SCTLR register.
Reported by: alc
Sponsored by: Innovate UK
Add support for stage 2 pmap to pmap_pte_dirty, pmap_release, and more
of pmap_enter. This adds support in all placess I have hit while testing
bhyve ehile faulting pages in as needed.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26065
The Ampere Altra has physical memory populated sparsely within the
physical address space. Increase the size of the dmap to cover all
physical memory.
Reviewed by: andrew
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26134
Add a synchronizing instruction to flush and wait until the local
CPU's writes are observable to other CPUs before sending IPIs.
This fixes an issue where recipient CPUs doing a rendezvous could
enter the rendezvous handling code before the initiator's writes
to the smp_rv_* variables were visible. This manifested as a
system hang, where a single CPU's increment of smp_rv_waiters[0]
actually happened "before" the initiator's zeroing of that field,
so all CPUs were stuck with the field appearing to be at
ncpus - 1.
Reviewed by: andrew, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D25798
Currently, we parse notes for the values of ELF FreeBSD feature flags
and osrel. Knowing these values, or knowing that image does not carry
the note if pointers are NULL, is useful to decide which ABI variant
(brand) we want to activate for the image.
Right now this is only a plumbing change
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
According to the ARM Design Document "IO Remapping Table Platform"
(DEN 0049D), the "Number of IDs" field of the ID mapping format means
"The number of IDs in the range minus one".
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D25179
Those messages were printed hundreds of times during boot, often multiple
times for each table. We already print information about the tables in
more organized form once to not duplicate it when random ACPI drivers are
attaching.
MFC after: 1 week
This is a step towards facilitating jails with only Linux binaries.
Supporting emul_path adds path lookups which are completely spurious
if the binary at hand runs in a Linux-based root directory.
It defaults to on (== current behavior).
make -C /root/linux-5.3-rc8 -s -j 1 bzImage:
use_emul_path=1: 101.65s user 68.68s system 100% cpu 2:49.62 total
use_emul_path=0: 101.41s user 64.32s system 100% cpu 2:45.02 total
The hard work of parsing fields per-CPU, handling heterogeneous
features, and excluding features from userspace is already done by
update_special_regs. We can build our set of HWCAPs from the result.
This exposed a small bug in update_special_regs, in which the
generated bitmask was not wide enough, and as a result some bits
weren't being exposed in user_cpu_desc. Fix this.
While here, adjust some formatting.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26069
This adds definitions for the latest additions to the AA64ISAR[01] ID
registers. This brings these registers in sync with ARMv8.6 initial spec
release.
An future change will parse many of these fields for HWCAP features.
Reviewed by: andrew, manu, markj (all previous versions)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26029
This adds support for the Cortex-A76 and Neoverse-N1 PMU counters to pmc.
While here add more PMCR_IDCODE values and check the implementers code is
correct before setting the PMU type.
Reviewed by: bz, emaste (looks reasonable to me)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25959
- Do not rely on U-Boot for clocks configuration, enable and set frequencies
in the driver's attach method.
- Adjust MAC settings according to detected linespeed on RK3399 and RK3328.
- Add support for RMII PHY mode on RK3328.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26006
Ethernet clocks on RK3328 are controlled by SYSCON registers, so add
RK_CLK_COMPOSITE_GRF flag to indicate that clock node should access grf
registers instead of CRU's
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25918
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Being able to use tmpfs without kernel modules is very useful when building
small MFS_ROOT kernels without a real file system.
Including TMPFS also matches arm/GENERIC and the MIPS std.MALTA configs.
Compiling TMPFS only adds 4 .c files so this should not make much of a
difference to NO_MODULES build times (as we do for our minimal RISC-V
images).
Reviewed By: br (earlier version for riscv), brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25317
This new function allows us to find the SMMU instance assigned
for a particular PCI RID.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D25687
This removes SCTP from in-tree kernel configuration files. Now, SCTP
can be enabled by simply loading the module, as discussed on
freebsd-net@.
Reviewed by: tuexen
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25611
It can be useful to get a dump of all registers when investigating why we
received an exception that we are unable to handle. In these cases we
already call panic, however we don't always print the registers.
Add calls to print_registers and print esr and far when applicable.
Sponsored by: Innovate UK
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
On architectures that use RELA relocations it is safe to rerun the ifunc
resolvers on after all CPUs have started, but while they are sill parked.
On arm64 with big.LITTLE this is needed as some SoCs have shipped with
different ID register values the big and little clusters meaning we were
unable to rely on the register values from the boot CPU.
Add support for rerunning the resolvers on arm64 and amd64 as these are
both RELA using architectures.
Reviewed by: kib
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25455
The functions to read the common user and kernel ID registers should be
in cpu.h rather than undefined.h as they are related to CPU details and
used by undefined instruction handlers.
Sponsored by: Innovate UK
Also move parsing the registers to just after the secondary CPUs have
started. This means the kernel register view from all CPUs is available
after the CPU SYSINITs have finished, e.g. for use by ifunc resolvers.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25505
- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK
With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274
In preparation for using ifuncs in the kernel is is useful to have a common
view of the arm64 ID registers across all CPUs. Add this and extract the
logic for finding the lower value of two fields to a new helper function.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25463
This effectively mirrors our libc implementation, but with minor fudging --
name needs to be copied in from userspace, so we just copy it straight into
stack-allocated memfd_name into the correct position rather than allocating
memory that needs to be cleaned up.
The sealing-related fcntl(2) commands, F_GET_SEALS and F_ADD_SEALS, have
also been implemented now that we support them.
Note that this implementation is still not quite at feature parity w.r.t.
the actual Linux version; some caveats, from my foggy memory:
- Need to implement SHM_GROW_ON_WRITE, default for memfd (in progress)
- LTP wants the memfd name exposed to fdescfs
- Linux allows open() of an fdescfs fd with O_TRUNC to truncate after dup.
(?)
Interested parties can install and run LTP from ports (devel/linux-ltp) to
confirm any fixes.
PR: 240874
Reviewed by: kib, trasz
Differential Revision: https://reviews.freebsd.org/D21845
For 1000Mb mode to work reliably TX/RX delays need to be configured
between the TX/RX clock and the respective signals on the PHY
to compensate for differing trace lengths on the PCB.
Reviewed by: manu
MFC after: 1 week
AcpiOsMapMemory is used for device memory when e.g. an _INI method wants
to access physical memory, however, aarch64 pmap_mapbios is hardcoded to
writeback. Search for the correct memory type to use in pmap_mapbios.
Submitted by: Greg V <greg_unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D25201
