it; instead pass the space occupied by the header down into the
crypto modules (except in the demic case which needs it only when
doing int in s/w)
o while here fix defrag to strip the header from 2nd and later frames
o teach decap code how to handle 4-address frames
or a bssid+ssid. This is needed for later versions of wpa_supplicant
and for forthcoming addons to wpa_supplicant.
Note this is an api change and applications must be rebuilt.
o don't pre-assign key index to the global key table entries so device
has a chance to decide what to use
o make ieee80211_crypto_newkey take the desired flags as an argument
instead of wacking the key structure directly; this eliminates a
bunch of code warts
o add a new flag IEEE80211_KEY_GROUP to indicate a key is a WPA Group
key so devices don't need to guess (temporarily add this flag in the
ioctl code until we can get wpa_supplicant+hostapd updated)
o shuffle IEEE80211_KEY_* bits to move flags used internally to the high
nibble of the flags word
Reviewed by: Tai-hwa Liang
panic with the NDISulator if you did "ifconfig ndis0 10.0.0.1/24,"
whereas "ifconfig ndis0 10.0.0.1/24 up" worked fine. The double fault
was caused by the ifconfig thread running out of kernel stack space.
(This was partly due to the NDIsulator using a couple of big buffers on
the stack, but even after fixing that the double fault persisted.)
It turns out that ndis_init() is called in both cases, but in the first
case the code path passes through ieee80211_ioctl(), and it turns out
ieee80211_ioctl() consumes a whopping 2400 bytes of stack space.
Apparently, gcc -O2 causes the ieee80211_ioctl_get80211() routine to
be inlined into ieee80211_ioctl(), and for some reason which I do not
fully understand, this causes ieee80211_ioctl() to consume an extra 2K
of stack space.
To prevent this overly agressive optimization, ieee80211_ioctl_get80211()
is now declared with __attribute__ ((noinline)). With this change,
ieee80211_ioctl() now only reserves about 200 bytes of stack instead of 2400.
frame includes FCS (requires applications to be updated, but since
we weren't doing the out-of-line FCS stuff anyway app changes
were needed already)
o add a flag to indicate padding exists between the 802.11 header and
the payload (e.g. for Atheros cards)
o diff reducation against netbsd
MFC after: 1 week
happen on the first management frame received from a neighbor; we assume
any merge candidate will send more frames and those should be processed
with a suitable table entry.
Stepped on by: Tai-hwa Liang
Hold a lock on the table instead of futzing with reference counts which
was potentially dangerous except drivers were quiescent while we did this
so the table contents never changed. Disable the hack logic for removing
scan candidates with multiple association failures; it's never done the
right thing and will be fixed correctly with background scanning goes in.
not we're going to process the frame; this makes the counters reflect frames
actually processes instead of received (discarded frames were already counted)
o ic_inact_auth is a bad name, it's the inactivity threshold
for being associated but not authorized; use it that way
o reset ni_inact when switching inactivity thresholds to
minimize the race against the timer (don't want to lock
for this stuff)
o change the inactivity probe threshold from a one-shot to
cover a range: when below this threshold but not expired
send a probe each inactivity interval; should probably
guard against the interval being turned way down as this
could cause us to spam the net with probes
we're at it:
o WPA/802.11i has a unicast key and a group key; in station mode
everything is sent with the unicast key--we were consulting the
destination mac address and incorrectly using the group key
o (perpetuate fallback use of the default tx key to maintain
compatibility with the way wpa_supplicant works)
o correct EAPOL encryption logic to check unicast key instead
of assuming other state implies this
o move QoS encapsulation up to before enmic work so TKIP has the
information required to calculate the pseudo-header
o do not do QoS-encapsulation of EAPOL frames as some ap's do the
wrong thing with such frames (may need to revisit this if ap's
start dropping non-QoS frames from stations assoc'd with QoS)
o move ieee80211_mbuf_adjust closer to its caller
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.
device drivers to declare that the ifp->if_start() method implemented
by the driver requires Giant in order to operate correctly.
Add a 'struct task' to 'struct ifnet' that can be used to execute a
deferred ifp->if_start() in the event that if_start needs to be called
in a Giant-free environment. To do this, introduce if_start(), a
wrapper function for ifp->if_start(). If the interface can run MPSAFE,
it directly dispatches into the interface start routine. If it can't
run MPSAFE, we're running with debug.mpsafenet != 0, and Giant isn't
currently held, the task is queued to execute in a swi holding Giant
via if_start_deferred().
Modify if_handoff() to use if_start() instead of direct dispatch.
Modify 802.11 to use if_start() instead of direct dispatch.
This is intended to provide increased compatibility for non-MPSAFE
network device drivers in the presence of Giant-free operation via
asynchronous dispatch. However, this commit does not mark any network
interfaces as IFF_NEEDSGIANT.
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.
__FreeBSD_version bump will follow.
Tested-by: (i386)LINT
o The ieee80211_media_status() function updates the ifi_link_state field
and calls rt_ifmsg() to notify listeners on the routing socket.
Approved by: sam
refcnt on the node but left it in the node table. This allows the node table
to hold the results of scanned ap's but for ibss scans left nodes w/o any
driver-private state setup and/or a bad refcnt (when the nodes were timed
out they were prematurely discarded). Now we treat nodes identified for ap
scanning as before but force nodes discovered when scanning for ibss neighbors
to have complete/proper state and hold the refcnt on the node. Any other
nodes created because of these frames are discarded directly (need to optimize
this case to eliminate various work that's immediately discarded).
o remove IEEE80211_C_RCVMGT capability
o on transmit craft new nodes as needed using new ieee80211_find_txnode routine
o add ieee80211_find_txnode routine to lookup a node by mac address and
if not present create one when operating in ibss/ahdemo mode; new nodes
are dup'd from bss and the driver is told to treat the node as if a new
association has been created so driver-private state (e.g. rate control
handling) is setup
Obtained from: netbsd (basic idea)
blindy copying the node contents; this turns out to be a bad idea as we
add more state in the node for things like WPA
o track node allocation failures in ieee80211_dup_bss instead of the callers
Obtained from: madwifi
active scan is completed just as WI_RID_READ_APS.
This fixes wicontrol -L for ath(4) and awi(4) to have results even if
the driver cannot associate any APs.
o #ifdef _KERNEL the fallback definition for DLT_IEEE802_11_RADIO
o fix many comments
o rename antenna stuff and fix units/reference signal
o change IEEE80211_RADIOTAP_DBM_TX_POWER from unsigned 16-bit value
to a signed 8-bit value
o change IEEE80211_RADIOTAP_FLAGS from 16 bits to 8 bits to simplify
padding requirements
o drop IEEE80211_RADIOTAP_TIME
o change IEEE80211_RADIOTAP_ANTENNA from 16 bits to 8 bits
o drop IEEE80211_RADIOTAP_PAD
o add channel flag definitions for outside the kernel so radiotap
doesn't depend on stuff in ieee80211*.h
Obtained from: NetBSD
o reject scan requests for a device that isn't marked up
This fixes a problem where requesting a scan before marking the device
up would cause a panic because the current channel was set to "any" (0xffff).
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
node lock while sending a management frame as this will potentially
result in a LOR with a driver lock. This doesn't happen for the
Atheros driver but does for the wi driver. Use a generation number
to help process each node once when scanning the node table and
drop the node lock if we need to timeout a node and send a frame.
AP has basic rates that we do not support then ignore them instead
of marking the rate set in error.
This fixes an 11b station associating with an 11g/b AP.
things than record a single value.
o add a per-node method for returning the "current RSSI" for a node
o create a default method that returns ni_rssi which is the rssi for
the last received frame
o use the per-node "get rssi" method to return data for the RID's
submitted by wicontrol, et. al.
Loosely based on work by Tom Marshall <tommy@home.tig-grr.com> for MADWIFI.
In particular, let drivers send up control frames so we can dispatch
them to bpf in monitor mode.
This is the first (small) step to adding more functionality such as
power save mode.
capabilities for outbound management frames. But beware of sending
this when operating on 5GHz channels; some 11a AP's reject association
requests if this bit is set in the capabilities listed.
Obtained from: MADWIFI (with modifications)
count handling of station entries in hostap mode:
Input path:
o driver is now expected to find the node associated with the
sender of a received frame; use ic_bss if none is located
o driver passes the (referenced) node into ieee80211_input for
use within the wlan module and is responsible for cleaning up
on return
o the antenna state is no longer passed up with each frame; this
is now considered driver-private state and drivers are responsible
for keeping it in the driver-private part of a node
Output path:
Revamp output path for management frames to eliminate redundant
locking that causes problems and to correct reference counting
bogosity that occurs when stations are timed out due to inactivity
(in AP mode). On output the refcnt'd node is stashed in the pkthdr's
recvif field (yech) and retrieved by the driver. This eliminates
an unref/ref scenario and related node table unlock/lock due to the
driver looking up the node. This is particularly important when
stations are timed out as this causes a lock order reversal that
can result in a deadlock. As a byproduct we also reduce the overhead
for sending management frames (minimal). Additional fallout from
this is a change to ieee80211_encap to return a refcn't node for
tieing to the outbound frame. Node refcnts are not reclaimed until
after a frame is completely processed (e.g. in the tx interrupt
handler). This is especially important for timed out stations as
this deref will be the final one causing the node entry to be
reclaimed.
Additional semi-related changes:
o replace m_copym use with m_copypacket (optimization)
o add assert to verify ic_bss is never free'd during normal operation
o add comments explaining calling conventions by drivers for frames
going in each direction
o remove extraneous code that "cannot be executed" (e.g. because
pointers may never be null)
to override the method pointers for manipulating nodes; this fixes
a problem where the ic_bss node was not being created properly
for the ath driver causing the driver to scribble on random memory.
Noticed by: David Young <dyoung@pobox.com>
rate set element id from an AP. This allows stations to associate with
AP's that violate the 802.11 spec by sending >8 rates. This corrects a
recent regression; older code did likewise.
override in their sub-class; this eliminates the hack of interpreting the
EINPROGRESS return value to mean "don't do any of the normal work"
o correct active scanning so the first channel is only scanned once and so
per-channel passive mode is properly honored
o expose 802.11 FSM state names so every driver doesn't keep a private copy
o eliminate node parameter to ieee80211_begin_scan; it was not being used
o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
incestuousness
o split device flags and capabilities to reduce confusion and provide room
for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...
