in6_v4mapsin6_sockaddr() which allocate the appropriate sockaddr_in*
structure and initialize it with the address and port information passed
as arguments. Use calls to these new functions to replace code that is
replicated multiple times in in_setsockaddr(), in_setpeeraddr(),
in6_setsockaddr(), in6_setpeeraddr(), in6_mapped_sockaddr(), and
in6_mapped_peeraddr(). Inline COMMON_END in tcp_usr_accept() so that
we can call in_sockaddr() with temporary copies of the address and port
after the PCB is unlocked.
Fix the lock violation in tcp6_usr_accept() (caused by calling MALLOC()
inside in6_mapped_peeraddr() while the PCB is locked) by changing
the implementation of tcp6_usr_accept() to match tcp_usr_accept().
Reviewed by: suz
not meant to duplicate) TCP/Vegas. Add four sysctls and default the
implementation to 'off'.
net.inet.tcp.inflight_enable enable algorithm (defaults to 0=off)
net.inet.tcp.inflight_debug debugging (defaults to 1=on)
net.inet.tcp.inflight_min minimum window limit
net.inet.tcp.inflight_max maximum window limit
MFC after: 1 week
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.
o Determine the lock strategy for each members in struct socket.
o Lock down the following members:
- so_count
- so_options
- so_linger
- so_state
o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:
- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()
Reviewed by: alfred
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
In order to ensure security and functionality, RFC 1948 style
initial sequence number generation has been implemented. Barring
any major crypographic breakthroughs, this algorithm should be
unbreakable. In addition, the problems with TIME_WAIT recycling
which affect our currently used algorithm are not present.
Reviewed by: jesper
making pcbs available to the outside world. otherwise, we will see
inpcb without ipsec security policy attached (-> panic() in ipsec.c).
Obtained from: KAME
MFC after: 3 days
This should help us in nieve benchmark "tests".
It seems a wide number of people think 32k buffers would not cause major
issues, and is in fact in use by many other OS's at this time. The
receive buffers can be bumped higher as buffers are hardly used and several
research papers indicate that receive buffers rarely use much space at all.
Submitted by: Leo Bicknell <bicknell@ufp.org>
<20010713101107.B9559@ussenterprise.ufp.org>
Agreed to in principle by: dillon (at the 32k level)
generation scheme. Users may now select between the currently used
OpenBSD algorithm and the older random positive increment method.
While the OpenBSD algorithm is more secure, it also breaks TIME_WAIT
handling; this is causing trouble for an increasing number of folks.
To switch between generation schemes, one sets the sysctl
net.inet.tcp.tcp_seq_genscheme. 0 = random positive increments,
1 = the OpenBSD algorithm. 1 is still the default.
Once a secure _and_ compatible algorithm is implemented, this sysctl
will be removed.
Reviewed by: jlemon
Tested by: numerous subscribers of -net
connection. The information contained in a tcptemp can be
reconstructed from a tcpcb when needed.
Previously, tcp templates required the allocation of one
mbuf per connection. On large systems, this change should
free up a large number of mbufs.
Reviewed by: bmilekic, jlemon, ru
MFC after: 2 weeks
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
to print out protocol specific pcb info.
A patch submitted by guido@gvr.org, and asmodai@wxs.nl also reported
the problem.
Thanks and sorry for your troubles.
Submitted by: guido@gvr.org
Reviewed by: shin
packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
- eliminate the fast/slow timeout lists for TCP and instead use a
callout entry for each timer.
- increase the TCP timer granularity to HZ
- implement "bad retransmit" recovery, as presented in
"On Estimating End-to-End Network Path Properties", by Allman and Paxson.
Submitted by: jlemon, wollmann
to either enqueue or free their mbuf chains, but tcp_usr_send() was
dropping them on the floor if the tcpcb/inpcb has been torn down in the
middle of a send/write attempt. This has been responsible for a wide
variety of mbuf leak patterns, ranging from slow gradual leakage to rather
rapid exhaustion. This has been a problem since before 2.2 was branched
and appears to have been fixed in rev 1.16 and lost in 1.23/1.28.
Thanks to Jayanth Vijayaraghavan <jayanth@yahoo-inc.com> for checking
(extensively) into this on a live production 2.2.x system and that it
was the actual cause of the leak and looks like it fixes it. The machine
in question was loosing (from memory) about 150 mbufs per hour under
load and a change similar to this stopped it. (Don't blame Jayanth
for this patch though)
An alternative approach to this would be to recheck SS_CANTSENDMORE etc
inside the splnet() right before calling pru_send() after all the potential
sleeps, interrupts and delays have happened. However, this would mean
exposing knowledge of the tcp stack's reset handling and removal of the
pcb to the generic code. There are other things that call pru_send()
directly though.
Problem originally noted by: John Plevyak <jplevyak@inktomi.com>
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
flag means that there is more data to be put into the socket buffer.
Use it in TCP to reduce the interaction between mbuf sizes and the
Nagle algorithm.
Based on: "Justin C. Walker" <justin@apple.com>'s description of Apple's
fix for this problem.
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
a hashed port list. In the new scheme, in_pcblookup() goes away and is
replaced by a new routine, in_pcblookup_local() for doing the local port
check. Note that this implementation is space inefficient in that the PCB
struct is now too large to fit into 128 bytes. I might deal with this in the
future by using the new zone allocator, but I wanted these changes to be
extensively tested in their current form first.
Also:
1) Fixed off-by-one errors in the port lookup loops in in_pcbbind().
2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash()
to do the initialial hash insertion.
3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability.
4) Added a new routine, in_pcbremlists() to remove the PCB from the various
hash lists.
5) Added/deleted comments where appropriate.
6) Removed unnecessary splnet() locking. In general, the PCB functions should
be called at splnet()...there are unfortunately a few exceptions, however.
7) Reorganized a few structs for better cache line behavior.
8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in
the future, however.
These changes have been tested on wcarchive for more than a month. In tests
done here, connection establishment overhead is reduced by more than 50
times, thus getting rid of one of the major networking scalability problems.
Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a
large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult.
WARNING: Anything that knows about inpcb and tcpcb structs will have to be
recompiled; at the very least, this includes netstat(1).
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
This commit includes the following changes:
1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility
glue for them is deleted, and the kernel will panic on boot if any are compiled
in.
2) Certain protocol entry points are modified to take a process structure,
so they they can easily tell whether or not it is possible to sleep, and
also to access credentials.
3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt()
call. Protocols should use the process pointer they are now passed.
4) The PF_LOCAL and PF_ROUTE families have been updated to use the new
style, as has the `raw' skeleton family.
5) PF_LOCAL sockets now obey the process's umask when creating a socket
in the filesystem.
As a result, LINT is now broken. I'm hoping that some enterprising hacker
with a bit more time will either make the broken bits work (should be
easy for netipx) or dike them out.
