- Some of the register writes were already done in the generic tuning code.
Remove them.
- Increase the polling timeout. The previous value is probably fine, but since
timeouts are treated as fatal errors increasing it to 200ms won't hurt.
- Rework the HS400 switching code. Make sure that the switch happens at the
right time. Reset the DLL0 block. We need to do that if u-boot has previously
configured the controller in HS400 mode.
- Check current timing before tuning. The tuning devmethod is always called,
even for timings that don't require the tuning procedure.
- Rework software tuning routine code. Use inner formula for clock
divider calculation, as previous one was incorrect.
- Implement custom re-tune procedure.
Co-authored-by: Hubert Mazur <hum@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D34027
The errata has to be applied every time after SDHCI_RESET_ALL is done.
Move it from attach to the custom reset routine.
Reviewed by: wma, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D33981
When enabled, have the framework use the boottrace(8) utility to execute
each rc script, generating trace entries for the entire suite of
scripts.
Reviewed by: 0mp (slightly earlier version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31930
This is a small program that when invoked will create start and stop
boottrace entries via sysctl, and execute the desired command. Having
this as an executable -- as opposed to some shell script invoking
sysctl(8) -- allows the total resource usage recorded by the trace
entries to include the child process.
Reviewed by: 0mp, trasz (older version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31929
Add boottrace annotations to record events in init(8), shutdown(8), and
reboot(8).
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D31928
Add trace events for execution of SYSINITs (both static and dynamically
loaded), and to the various steps in the shutdown/panic/reboot paths.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D30187
This is preferred by style(9). Do this ahead of adding another include.
Reviewed by: imp, kevans, allanjude
MFC after: 3 days
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30186
This is preferred by style(9). Do this ahead of adding another include.
Reviewed by: imp, kevans
MFC after: 3 days
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30185
Boottrace is a facility for capturing trace events during boot and
shutdown. This includes kernel initialization, as well as rc. It has
been used by NetApp internally for several years, for catching and
diagnosing slow devices or subsystems. It is driven from userspace by
sysctl interface, and the output is a human-readable log of events
(kern.boottrace.log).
This commit adds the core boottrace functionality implementing these
interfaces. Adding the trace annotations themselves to kernel and
userland will happen in follow-up commits. A future commit will also add
a boottrace(4) man page.
For now, boottrace is unconditionally compiled into the kernel but
disabled by default. It can be enabled by setting the
kern.boottrace.enabled tunable to 1 in loader.conf(5).
There is an existing boot-time event tracing facility, which can be
compiled into the kernel with 'options TSLOG'. While there is some
functional overlap between this and boottrace, they are distinct. TSLOG
is suitable for generating detailed timing information and flamegraphs,
and has been used to great success by cperciva@ to diagnose and reduce
the overall system boot time. Boottrace aims to more quickly provide an
overview of timing and resource usage of the boot (and shutdown) process
to a sysadmin who requires this knowledge.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D30184
if_bridge duplicates broadcast packets with m_copypacket(), which
creates shared packets. In certain circumstances these packets can be
processed by udp_usrreq.c:udp_input() first, which modifies the mbuf as
part of the checksum verification. That may lead to incorrect packets
being transmitted.
Use m_dup() to create independent mbufs instead.
Reported by: Richard Russo <toast@ruka.org>
Reviewed by: donner, afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34319
Create definitions for the Optional Asynchronous Events Supported (OAES)
values. Also adds a helper macro for the common use case of "mask and
shift". E.g.
value = NVME_CTRLR_DATA_OAES_NS_ATTR_MASK << NVME_CTRLR_DATA_OAES_NS_ATTR_SHIFT;
becomes
value = NVMEB(NVME_CTRLR_DATA_OAES_NS_ATTR);
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D34300
mmc_helper have an hard dependency on gpio_if.h
gpio(4) isn't in the default x86 kernel and none of the x86
sd/mmc drivers uses mmc_helper so just add a dependency on gpio.
Fixes: 85b3794cee ("files: Make ext_resources non-optional")
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
For RISC-V it was always enabled.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33835
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33834
The only valid condition for if_awg and aw_syscon is syscon.
EXT_RESOURCES is enabled in GENERIC since 12-CURRENT.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33833
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33832
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33831
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33830
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33829
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33828
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33827
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33826
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33825
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33824
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33823
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33822
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33821
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33820
Use kern.elfXX.allow_wx to decide whether to map W+X or W-only memory.
Future work could expand this test to add an "allow_wx" axis to the
test matrix, but I would argue that a separate test should be written,
since that's orthogonal to map_at_zero.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
In the transport call on 12/3 Gleb asked to move the CC modules towards
using reference counting to prevent folks from unloading a module in use.
It was also agreed that Michael would do a user space utility like tcp_drop
that could be used to move all connections that are using a specific CC
to some other CC.
This is the half I committed to doing, making it so that we maintain a refcount
on a cc module every time a pcb refers to it and decrementing that every
time a pcb no longer uses a cc module. This also helps us simplify the
whole unloading process by getting rid of tcp_ccunload() which munged
through all the tcb's. Instead we mark a module as being removed and
prevent further references to it. We also make sure that if a module is
marked as being removed it cannot be made as the default and also
the opposite of that, if its a default it fails and does not mark it as being
removed.
Reviewed by: Michael Tuexen, Gleb Smirnoff
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D33249
